Hi people.
I want to replace the rear outer CV joints, NB8A year 2000, from the bit of searching I've done the CV is supplied with the axle shaft. Is this true?
I would like to buy the outer CVs only?
before you say just buy the complete unit with inner and outer CV on the axle. I don't want the inner, as these are subaru CVs. Don't ask
supplier rear CV joints
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Fast Driver
- Posts: 283
- Joined: Tue Sep 13, 2016 4:00 pm
- Vehicle: MX5 Locost
- Location: Newcastle
- RedMX
- Fast Driver
- Posts: 314
- Joined: Tue Apr 05, 2011 3:16 pm
- Vehicle: Non MX-5
- Location: Ballarat, Central Victoria
Re: supplier rear CV joints
You might get some luck at a driveline specialist, as they might be able to either identify the joint & be able to cross reference the individual joint through a catalogue.
I know as a BMW/VW tech at the dealership I used to replace just the joint & boot itself in most cases.
I know as a BMW/VW tech at the dealership I used to replace just the joint & boot itself in most cases.
- greenMachine
- Forum Guru
- Posts: 4054
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB SE
- Location: Sports car paradise - Canberra
- Contact:
Re: supplier rear CV joints
Desperate Situations Call for Desperate Measures Department:
Back in the day, when front wheel drive was still getting sorted, the backyard tip was to reverse the shafts, so that the drive was acting on the opposite side of the housing (ie the relatively unworn side).
Back in the day, when front wheel drive was still getting sorted, the backyard tip was to reverse the shafts, so that the drive was acting on the opposite side of the housing (ie the relatively unworn side).
I never met a horsepower I didn't like (thanks bwob)
Build thread
NB SE - gone to the dark side (and loving it )
Build thread
NB SE - gone to the dark side (and loving it )
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 38 guests