1991 Malibu not original, not finished, not cheap!

MX5, Miata and Eunos Cars For Sale

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

cookie
Fast Driver
Posts: 471
Joined: Thu Dec 19, 2013 10:36 pm
Vehicle: NA6

1991 Malibu not original, not finished, not cheap!

Postby cookie » Mon Feb 06, 2023 10:40 pm

Check the rarely updated build thread for.more detail. Haven't been on here for 2 years sadly.

Life's dictated I should sell (or keep 3 impractical cars and have zero house deposit, yay for seperation) looking around the 20k mark. You tell.me if I'm dreaming..

I'd preference someone finishing this off and enjoying it, rather than being stripped and sold for profit. There's definitely some cool bits but rarely eill a pile of parts come up like this.

It needs lots of time and effort.
It needs front big brakes or stock nb8b ones reinstated (gmhave stock na6 and possibly nb8b fronts, need to check)
It also needs cooler piping and exhaust from dump to cat mated up
Interior put back in
Ecu wiring for flex fuel etc
Skunk2 manifold welded to included flange
Driveline is complete but engine has never run since being built years ago.

Located brisbane northside.

A more detailed list of stuff that you get!

Chassis
1991 Malibu na6 213k no wovi, never crashed, never hit anything and straight. I believe there's no rust, I've had carpets out etc. Stored in a shed 99% of its life when not dríven. 3 owners.
Mod plates for Rollbar, seats and turbo

Driveline
1.8 na8 engine with wiseco rods and je pistons I believe (or similar quality)
ACL bearings
Head flowed and cleaned up by plr - I have flow test results somewhere if photobucket hasn't removed my account
Arp ahead studs
Genuine oil pump (new)
Skunk2 b18 intake manifold and throttle body
Fab9 steampipe stainlesa manifold
Garrett gtx2867r turbo
Tial rear housing I believe is 0.86.
Turbosmart 40mm wastegate, bov and oil pressure reg for turbo Nitrodann 3" exhaust
Golbeys oil cooler kit
Koyorad alloy radiator with high pressure cap
Coolant reroute
High-flow thermostat
Spal fan
Braided turbo oil lines

Engine not fitted
Toda 272 cams with adjustable gears
Toda solid buckets and uprated springs
Ati super dampener
Gates racing timing belt
Mls Head gasket
Top spec boundary oil pump (high flow and pressure
Oil filter relocation block

Fuel
Flying miata big fuel kit
Gm flex sensor
Aem e85 safe intank high output fuel pump (I believe it's aem, or similar quality/spec
M tuned Duel feed rail
1000cc injectors
Fuel pressure regulator
K&N pod filter
Lightened chromo flywheel with modified exedy NPC organic clutch

Gearbox is nb8b 6 speed
Diff is reconditioned with rebuilt shafts by gtracing and new bearings in hubs

Bracing
Full butterfly brace kit
Cusco front and rear lca braces
Mazdaspeed rear brace
Front 3 point strut brace (beatrush I believve)
Mx5+ tallboy roll bar
Boss frog front fender bracing

Seats
Velo podium
Mazdaspeed type f mesh
6 point Willians harness for driver

Suspension
Mca Reds
Front unknown currently - but will endeavour to get nb8b gear
Rear 4 pot ap racing with 270mm discs
Braided lines
Braided clutch line
Front whiteline swaybar (think I have stock also)
Whiteline adjustable swaybar links
Arp extended wheel studs (not.fitted)
Superpro bush kit (not fitted)
Rims 15x9 advanti storm with 225 rs3's

Electronics

Adaptonic 440d
Innovate wideband kit
3x innovate dual guages in cups
Toyota corolla COP coils
4 bar bosch map sensor
Kenwood 2 channel amp and hertz 6.5s in front
Pioneer head unit

Styling stuff
Chrome fuel cap
Stubby antenna
Altezza tail lights
Alloy/carbon radiator slam panel
Delrin door bushes
New window bushes
New window bushes
Mazdaspeed handbrake cover and gear knob (these fetch huge money)
Mazdaspeed oil cap (silver)
ILmotorsport window washers, rear vision mirror, upper and lower gearshift boots.
Japanese areo windscreen wipers
Cappuccino slim Washer bottle
Peterson Oil catch can
Jdm folding visors

Then loads of spare seals, pcv valve, engine bits, hoses, cooler piping etc.
I've had a few inspect and make an offer but throwing it out here as a last ditch effort to reach someone new who might love to finish it.
20230205_083850.jpg

20230205_085548.jpg

20230205_125609.jpg
You do not have the required permissions to view the files attached to this post.

93_Clubman
Speed Racer
Posts: 11852
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: 1991 Malibu not original, not finished, not cheap!

Postby 93_Clubman » Tue Feb 07, 2023 12:27 am

Lots of great stuff, including chassis being an absolutely straight 213k kms 1991 Malibu - GLWS!

User avatar
greenMachine
Forum Guru
Posts: 4053
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB SE
Location: Sports car paradise - Canberra
Contact:

Re: 1991 Malibu not original, not finished, not cheap!

Postby greenMachine » Tue Feb 07, 2023 8:14 am

Nice car, great project. Too bad I am under water in projects. :frown:

GLWS!

:mrgreen:
I never met a horsepower I didn't like (thanks bwob)

Build thread

NB SE - gone to the dark side (and loving it 8) )

The American
Forum Guru
Posts: 1525
Joined: Fri Jun 29, 2012 9:23 pm
Vehicle: NB8B - Turbo
Location: Brisbane, Qld. Previously Perth WA
Contact:

Re: 1991 Malibu not original, not finished, not cheap!

Postby The American » Tue Feb 07, 2023 8:40 am

I’d like it too, but have no space and my own project with flagging motivation.

You might sell it in parts for more than you’re asking (what I’ll do with mine if the time comes to quit on it)

User avatar
ManiacLachy
Forum Guru
Posts: 3266
Joined: Mon Jan 13, 2014 2:35 pm
Vehicle: NB SE
Location: Brisbane

Re: 1991 Malibu not original, not finished, not cheap!

Postby ManiacLachy » Tue Feb 07, 2023 10:40 am

The American wrote:I’d like it too, but have no space and my own project with flagging motivation.

You might sell it in parts for more than you’re asking (what I’ll do with mine if the time comes to quit on it)

Don't you dare!

Cookie, shame you never got the time to finish off this project. It's a great selection of parts, and we all love a Malibu NA, the final result would have been spectacular. This project needs the right buyer, there aren't too many out there but for someone it will be perfect! Good luck :beer:

User avatar
bruce
Speed Racer
Posts: 7706
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: 1991 Malibu not original, not finished, not cheap!

Postby bruce » Tue Feb 07, 2023 11:22 am

Nice. But difficult to sell incomplete.

User avatar
bruce
Speed Racer
Posts: 7706
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: 1991 Malibu not original, not finished, not cheap!

Postby bruce » Tue Feb 07, 2023 12:18 pm

I fear this will be sold for parts. The vultures will start to circle...

cookie
Fast Driver
Posts: 471
Joined: Thu Dec 19, 2013 10:36 pm
Vehicle: NA6

Re: 1991 Malibu not original, not finished, not cheap!

Postby cookie » Tue Feb 07, 2023 8:33 pm

bruce wrote:Nice. But difficult to sell incomplete.


Yep. But there's interest from the lotus crowd and they all have more money than me so there's hope!

User avatar
aka_juffa
Racing Driver
Posts: 1005
Joined: Wed Dec 14, 2011 2:40 pm
Vehicle: NA8
Location: SE Melbourne.

Re: 1991 Malibu not original, not finished, not cheap!

Postby aka_juffa » Mon Feb 20, 2023 2:21 pm

OMG a Malibu Gold with goodies........I've had two previously.....do I want a third?

I have a dodgy uncle on Bribe Island with a tilt tray truck, now I just need to bribe him to ship it south of the border.
Motor Neurone Disease chose me, I choose Voluntary Assisted Dying.


Return to “MX5 Cars - For Sale”

Who is online

Users browsing this forum: No registered users and 12 guests