Rear wing/spoiler

bruce · Postby **bruce** » Mon Feb 13, 2023 8:52 am

Hi guys,
Trying to find a ducktail/blade style wing for my NA rear end. I want it to be small and of a more modern 'blade' style. Everything I've seen has been too big or just ugly IMO.
I've goggled it, checked ebay, aliexpress, etsy, etc.
This kind of style but a little smaller. Ideally in carbon or gloss black;

bruce · Postby **bruce** » Mon Feb 13, 2023 9:42 am

Also saw these but (see my tiny comments under each pic);

bruce · Postby **bruce** » Mon Feb 13, 2023 10:23 am

The last two pics are from the same seller and the same listing. He says the red NA spoiler is unavailable but I have a sneaking suspicion it is the same as the pictured ND spoiler. I wonder if the bootlid of an ND is similar in contours and dimensions to an NA?

bruce · Postby **bruce** » Mon Feb 13, 2023 11:13 am

I think I might have to DIY, make my own. 3D printer would be nice to design it or modify it from an existing spoiler then get it professionally painted gloss black (on a silver car). Or dream of it in nice carbon fibre.

PaulF · Postby **PaulF** » Mon Feb 13, 2023 3:42 pm

I'm guessing you don't like any of the CarbonMiata options?
#1
#2
#3
#4

93_Clubman · Postby **93_Clubman** » Mon Feb 13, 2023 4:10 pm

Lip or ducktail was my preference, but I've not looked at them for a while. There was a Rod Millen Motorsports ducktail for the NA:
https://www.justcars.com.au/cars-for-sa ... id=1&pid=1
&
https://www.ilmotorsport.de/en/mx-5-rea ... works-3900

bruce · Postby **bruce** » Mon Feb 13, 2023 5:06 pm

Thanks guys. All of those are a bit too big, I'm after something more subtle.

bruce · Postby **bruce** » Mon Feb 13, 2023 5:08 pm

Does anyone have the width of an ND bootlid?

KevGoat · Postby **KevGoat** » Mon Feb 13, 2023 5:30 pm

Is this too subtle? ....

https://spoilerking.com/products/mazda-miata-na-1990-1997-trunk-lip-spoiler-244l

Sent from my SM-G781B using Tapatalk

bruce · Postby **bruce** » Mon Feb 13, 2023 5:56 pm

Too subtle. But very close.

bruce · Postby **bruce** » Mon Feb 13, 2023 7:18 pm

I don't mind this one ;
https://spoilerking.com/products/mazda- ... id=1&pid=1
But $270 delivered for a bit of rubber is a bit much, it needs to be carbon.

93_Clubman · Postby **93_Clubman** » Mon Feb 13, 2023 11:26 pm

https://cartoys.com.au/product/mx5-na-m ... -body-kit/

https://rev9autosport.com/us-racing-spo ... trunk.html

https://www.alibaba.com/product-detail/ ... 68443.html

Nevyn72 · Postby **Nevyn72** » Tue Feb 14, 2023 9:43 am

bruce wrote:Does anyone have the width of an ND bootlid?

970mm

bruce · Postby **bruce** » Tue Feb 14, 2023 10:32 am

Thanks to you both. Clubby, those boots are interesting but my stock boot is painted perfectly and in great condition.
970mm which is close to the 1020of the NA. Makes me think an ND spoiler might fit...