Add Power steer without AC?
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- Ross
- Fast Driver
- Posts: 174
- Joined: Tue Jun 12, 2012 11:32 am
- Vehicle: NA6
- Location: Melbourne Eastern Suburbs
Add Power steer without AC?
Is it possible to add PS without AC?
The PS bracket does the tensioning when combined with AC, so does the PS only setup have an idler pulley?
Anyone want to sell me a complete PS without AC setup?
The PS bracket does the tensioning when combined with AC, so does the PS only setup have an idler pulley?
Anyone want to sell me a complete PS without AC setup?
Cheers
Ross
1990 BRG V-Special, NB Koni sport with King springs, MS-03's
Ross
1990 BRG V-Special, NB Koni sport with King springs, MS-03's
- bruce
- Speed Racer
- Posts: 7707
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
- greenMachine
- Forum Guru
- Posts: 4053
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB SE
- Location: Sports car paradise - Canberra
- Contact:
Re: Add Power steer without AC?
bruce wrote:Buy a shorter belt?
Yes.
If noone gives you a part number I may have one leftover from the racecar. I can check next week when I get back home.
I never met a horsepower I didn't like (thanks bwob)
Build thread
NB SE - gone to the dark side (and loving it )
Build thread
NB SE - gone to the dark side (and loving it )
- bruce
- Speed Racer
- Posts: 7707
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: Add Power steer without AC?
Or use a piece of string to measure and count the number of ribs/width. Off to the parts shop and find a matching belt.
-
- Racing Driver
- Posts: 1770
- Joined: Fri May 16, 2008 1:39 pm
- Vehicle: NB8A
- Location: FarSE Melbourne
Re: Add Power steer without AC?
There is no idler pulley with a PS/no AC setup. Belt just runs direct pulley to pulley.
As others have mentioned you use a shorter belt and still use the PS bracket adjustment to tension.
As others have mentioned you use a shorter belt and still use the PS bracket adjustment to tension.
- Ross
- Fast Driver
- Posts: 174
- Joined: Tue Jun 12, 2012 11:32 am
- Vehicle: NA6
- Location: Melbourne Eastern Suburbs
Re: Add Power steer without AC?
Awesome, thanks guys.
Now, who wants to sell me their PS rack and pump for a 1.6
Now, who wants to sell me their PS rack and pump for a 1.6
Cheers
Ross
1990 BRG V-Special, NB Koni sport with King springs, MS-03's
Ross
1990 BRG V-Special, NB Koni sport with King springs, MS-03's
- Ross
- Fast Driver
- Posts: 174
- Joined: Tue Jun 12, 2012 11:32 am
- Vehicle: NA6
- Location: Melbourne Eastern Suburbs
Re: Add Power steer without AC?
Just found an accessory belt Idler bracket and pulley in my box of bits, to replace the power steering pump and keep your AC
So if anyone is interested in a swap, I've got a manual rack and idler pulley to swap for a power steering rack and pump.
So if anyone is interested in a swap, I've got a manual rack and idler pulley to swap for a power steering rack and pump.
Cheers
Ross
1990 BRG V-Special, NB Koni sport with King springs, MS-03's
Ross
1990 BRG V-Special, NB Koni sport with King springs, MS-03's
-
- Speed Racer
- Posts: 11856
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Add Power steer without AC?
bwob (Bob Hall, Father of the Miata: https://www.miata.net/askbob ) explained on the big forum that the NA6 PS 'would have gotten the development and tuning it deserved (before the money stopped coming in as Mazda hit the wall financially in the late 1980s)' had Mazda not had to develop a non-assisted system at the last minute to satisfy the USDM, so if you can you may be better fitting NA8 PS:
bwob:
'As Gordon correctly pointed out, the tweaks to the power steering used on 1994 and later NAs (as well as NBs) embodied some of the work which had been done for the original gear and is better in terms of the subjective aspects of the assisted steering where the hardware in 1.6 litre NAs falls short'.
https://forum.miata.net/vb/archive/inde ... 53831.html
Gord96BRG:
'It's also worth noting that the power steering system was improved for the 94+ 1.8 series - it has better feel and isn't quite as overboosted in effort. bwob wrote about that improvement, saying an engineer in Mazda Japan was working on some custom (expensive) PS valving [for the 1.6] which provided incredible feel. Only a few sets of the custom valving units were (hand) manufactured, but some of the valve body changes he'd come up with were incorporated in the 94+ 1.8 units'.
https://forum.miata.net/vb/archive/inde ... 53831.html
bwob:
'As Gordon correctly pointed out, the tweaks to the power steering used on 1994 and later NAs (as well as NBs) embodied some of the work which had been done for the original gear and is better in terms of the subjective aspects of the assisted steering where the hardware in 1.6 litre NAs falls short'.
https://forum.miata.net/vb/archive/inde ... 53831.html
Gord96BRG:
'It's also worth noting that the power steering system was improved for the 94+ 1.8 series - it has better feel and isn't quite as overboosted in effort. bwob wrote about that improvement, saying an engineer in Mazda Japan was working on some custom (expensive) PS valving [for the 1.6] which provided incredible feel. Only a few sets of the custom valving units were (hand) manufactured, but some of the valve body changes he'd come up with were incorporated in the 94+ 1.8 units'.
https://forum.miata.net/vb/archive/inde ... 53831.html
-
- Racing Driver
- Posts: 862
- Joined: Sat Jan 01, 2011 2:30 pm
- Vehicle: NA6
- Location: Newcastle
Re: Add Power steer without AC?
I run PS with no AC. I can look up the belt part number when I walk outside to the garage next.
WP:1.12.492 SMPN:1.16.403 SMPS:1.05.473 SMPGP:1.53.256 SMPB:2.22.181
-
- Racing Driver
- Posts: 862
- Joined: Sat Jan 01, 2011 2:30 pm
- Vehicle: NA6
- Location: Newcastle
Re: Add Power steer without AC?
4PK845
You might find a slightly longer or shorter belt works too.
You might find a slightly longer or shorter belt works too.
WP:1.12.492 SMPN:1.16.403 SMPS:1.05.473 SMPGP:1.53.256 SMPB:2.22.181
- greenMachine
- Forum Guru
- Posts: 4053
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB SE
- Location: Sports car paradise - Canberra
- Contact:
Re: Add Power steer without AC?
greenMachine wrote:bruce wrote:Buy a shorter belt?
Yes.
If noone gives you a part number I may have one leftover from the racecar. I can check next week when I get back home.
No such luck.
If nothing else surfaces, the piece of string/rib count will work.
I never met a horsepower I didn't like (thanks bwob)
Build thread
NB SE - gone to the dark side (and loving it )
Build thread
NB SE - gone to the dark side (and loving it )
-
- Racing Driver
- Posts: 862
- Joined: Sat Jan 01, 2011 2:30 pm
- Vehicle: NA6
- Location: Newcastle
Re: Add Power steer without AC?
greenMachine wrote:...snip...
the piece of string/rib count will work.
4PK845
WP:1.12.492 SMPN:1.16.403 SMPS:1.05.473 SMPGP:1.53.256 SMPB:2.22.181
- Ross
- Fast Driver
- Posts: 174
- Joined: Tue Jun 12, 2012 11:32 am
- Vehicle: NA6
- Location: Melbourne Eastern Suburbs
Re: Add Power steer without AC?
OK, we've got everything but the rack mounting brackets.The manual ones are too small.
Anybody got some that they are willing to part with, or know of another Mazda vehicle with the same brackets?
We'll have a manual rack and brackets to trade if it helps?
Anybody got some that they are willing to part with, or know of another Mazda vehicle with the same brackets?
We'll have a manual rack and brackets to trade if it helps?
Cheers
Ross
1990 BRG V-Special, NB Koni sport with King springs, MS-03's
Ross
1990 BRG V-Special, NB Koni sport with King springs, MS-03's
-
- Speed Racer
- Posts: 11856
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Add Power steer without AC?
Yahn, Ex3me on here, (o43z5zo657) or mx589 might be able to help & both are in Melb.
Both Yahn & mx589 usually have cars &/or parts on Gumtree, but from a quick look couldn't see anything current:
https://www.gumtree.com.au/s-seller/yahn/1000344312
search.php?keywords=&terms=all&author=mx589&fid%5B%5D=80&sc=1&sf=all&sr=posts&sk=t&sd=d&st=0&ch=300&t=0&submit=Search
Both Yahn & mx589 usually have cars &/or parts on Gumtree, but from a quick look couldn't see anything current:
https://www.gumtree.com.au/s-seller/yahn/1000344312
search.php?keywords=&terms=all&author=mx589&fid%5B%5D=80&sc=1&sf=all&sr=posts&sk=t&sd=d&st=0&ch=300&t=0&submit=Search
- Ross
- Fast Driver
- Posts: 174
- Joined: Tue Jun 12, 2012 11:32 am
- Vehicle: NA6
- Location: Melbourne Eastern Suburbs
Re: Add Power steer without AC?
93_Clubman wrote:Yahn, Ex3me on here, (o43z5zo657) or mx589 might be able to help & both are in Melb.
Both Yahn & mx589 usually have cars &/or parts on Gumtree, but from a quick look couldn't see anything current:
https://www.gumtree.com.au/s-seller/yahn/1000344312
search.php?keywords=&terms=all&author=mx589&fid%5B%5D=80&sc=1&sf=all&sr=posts&sk=t&sd=d&st=0&ch=300&t=0&submit=Search
Thanks, I tried both of them first, none available
Cheers
Ross
1990 BRG V-Special, NB Koni sport with King springs, MS-03's
Ross
1990 BRG V-Special, NB Koni sport with King springs, MS-03's
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: Google [Bot] and 0 guests