NB Wheel Centre Cap
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Fast Driver
- Posts: 105
- Joined: Tue May 20, 2014 11:18 pm
- Vehicle: NB8B
- Location: Kempsey
NB Wheel Centre Cap
Hi all,
I'm looking for an NB Wheel Centre Cap for my 2003 model please?
I took the stock wheels off some time ago to put some 17" mags on, however, after cracking one due to a major pothole the other day, I decided to go back to the stock ones until I can get some cash together for a new set of mags.
I looked online for a new one and nearly fell over to see people asking $60 a pop.
I was hoping someone out there may have a spare they could part with, without wanting a kidney and a new born child in exchange.
Thanks for any help in my quest.
Wayne.
I'm looking for an NB Wheel Centre Cap for my 2003 model please?
I took the stock wheels off some time ago to put some 17" mags on, however, after cracking one due to a major pothole the other day, I decided to go back to the stock ones until I can get some cash together for a new set of mags.
I looked online for a new one and nearly fell over to see people asking $60 a pop.
I was hoping someone out there may have a spare they could part with, without wanting a kidney and a new born child in exchange.
Thanks for any help in my quest.
Wayne.
You do not have the required permissions to view the files attached to this post.
- greenMachine
- Forum Guru
- Posts: 4053
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB SE
- Location: Sports car paradise - Canberra
- Contact:
Re: NB Wheel Centre Cap
So, are the 16 centre caps the same as 15s - are they interchangeable?
I never met a horsepower I didn't like (thanks bwob)
Build thread
NB SE - gone to the dark side (and loving it )
Build thread
NB SE - gone to the dark side (and loving it )
-
- Fast Driver
- Posts: 105
- Joined: Tue May 20, 2014 11:18 pm
- Vehicle: NB8B
- Location: Kempsey
Re: NB Wheel Centre Cap
Good question Mr. Green. Unfortunately, I don't know.
-
- Fast Driver
- Posts: 105
- Joined: Tue May 20, 2014 11:18 pm
- Vehicle: NB8B
- Location: Kempsey
Re: NB Wheel Centre Cap
I asked around and yes, they are different caps between 15" and 16".
You do not have the required permissions to view the files attached to this post.
- bruce
- Speed Racer
- Posts: 7706
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: NB Wheel Centre Cap
I find that wheel cracks caused by pot holes are due to under inflated tires.
- bootz
- Racing Driver
- Posts: 887
- Joined: Thu Aug 19, 2010 1:13 pm
- Vehicle: NB8B
- Location: The Wild Wild West
Re: NB Wheel Centre Cap
16inch wheels take 52mm cap
Unfortunately the current mazda cap which is very attractive is 58mm so you can't use that.
Unfortunately the current mazda cap which is very attractive is 58mm so you can't use that.
Bootz and Boof - On the road to somewhere.
-
- Fast Driver
- Posts: 105
- Joined: Tue May 20, 2014 11:18 pm
- Vehicle: NB8B
- Location: Kempsey
Re: NB Wheel Centre Cap
No, the tyres were inflated correctly Bruce. The pothole was about 6 inches deep by about 1 metre by 2 metres, so I don't think the air pressure, whatever it was, would've made much difference. We've had lots of heavy rain over the past month which has created havoc on our local roads.
- bruce
- Speed Racer
- Posts: 7706
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
-
- Fast Driver
- Posts: 105
- Joined: Tue May 20, 2014 11:18 pm
- Vehicle: NB8B
- Location: Kempsey
Re: NB Wheel Centre Cap
Haha... It could well have been.
- greenMachine
- Forum Guru
- Posts: 4053
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB SE
- Location: Sports car paradise - Canberra
- Contact:
Re: NB Wheel Centre Cap
5isalive wrote:I asked around and yes, they are different caps between 15" and 16".
Sigh, ... I should have remembered the cutouts for the nuts.
I went down to Nowra last weekend, gave Taralga/Braidwood-Nerriga-Nowra a miss for exactly that reason, went down via Batemans Bay, back via Wollongong and Picton Rd, quite the scenic route but mercifully relatively free of potholes.
I never met a horsepower I didn't like (thanks bwob)
Build thread
NB SE - gone to the dark side (and loving it )
Build thread
NB SE - gone to the dark side (and loving it )
-
- Fast Driver
- Posts: 105
- Joined: Tue May 20, 2014 11:18 pm
- Vehicle: NB8B
- Location: Kempsey
Re: NB Wheel Centre Cap
Pleased to hear Mr. Green. The Mid North Coast unfortunately, is starting to look like the surface of the moon. The roads are an utter disgrace.
- StanTheMan
- Forum legend
- Posts: 6824
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Balgowlah
Re: NB Wheel Centre Cap
you pay 42 a pop over in the UK plus postage
https://www.mx5parts.co.uk/alloy-wheel- ... rrency=AUD
Thats mazda being total dicks with their pricing in AU
https://www.mx5parts.co.uk/alloy-wheel- ... rrency=AUD
Thats mazda being total dicks with their pricing in AU
Satans Ride called F33nix the resurrected NA6
-
- Fast Driver
- Posts: 105
- Joined: Tue May 20, 2014 11:18 pm
- Vehicle: NB8B
- Location: Kempsey
Re: NB Wheel Centre Cap
Totally agree.
- StanTheMan
- Forum legend
- Posts: 6824
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Balgowlah
Re: NB Wheel Centre Cap
surely someone could replicate these & print them?
Satans Ride called F33nix the resurrected NA6
- bruce
- Speed Racer
- Posts: 7706
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: NB Wheel Centre Cap
Then you'd have to paint them and make sure the colour matched...
Return to “MX5 Used Parts - For Sale”
Who is online
Users browsing this forum: No registered users and 22 guests