Softop installers in Melbourne?

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
JINBA ITTAI
Driver
Posts: 42
Joined: Sun May 28, 2017 12:34 pm
Vehicle: 10AE

Softop installers in Melbourne?

Postby JINBA ITTAI » Mon Aug 23, 2021 11:43 am

I'll be getting a Robbins top soon for my 10AE and I"m looking for recommendations for a good top installer in Melbourne.

Who have you used? Were you happy? How much should one budget for the install? Thanks.

User avatar
Penguin
Fast Driver
Posts: 121
Joined: Tue Apr 17, 2007 4:32 pm
Vehicle: NC
Location: Tasmania

Re: Softop installers in Melbourne?

Postby Penguin » Tue Aug 24, 2021 2:10 pm

I had a very good experience with these folk a few years back on an NC

https://www.motorcrafttrimmers.com.au

It was an insurance job as it turned out so don't know the price. They suggested that a few years previously somebody had tried to get into the car with a screw driver and bent a stay, that eventually gave out. The external evidence was a slight indentation on the rubber around the rear bodywork. The indentation lined up with the bent stay. The insurance company agreed and covered the full cost.

DG

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: Softop installers in Melbourne?

Postby 93_Clubman » Wed Aug 25, 2021 2:10 am

JINBA ITTAI wrote:looking for recommendations for a good top installer in Melbourne. How much should one budget for the install?

Can't recommend anyone in the eastern suburbs, only someone in the outer SE suburbs. Re cost, factor in about a days labour at $100 per hour - yes it's a time consuming & consequently expensive job, hence many tackle it themselves: https://www.miata.net/garage/garagetops.html

User avatar
bruce
Speed Racer
Posts: 7707
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: Softop installers in Melbourne?

Postby bruce » Wed Aug 25, 2021 11:59 am

Yes, many DIY. There should be a million guides on Yoootooob.

User avatar
JINBA ITTAI
Driver
Posts: 42
Joined: Sun May 28, 2017 12:34 pm
Vehicle: 10AE

Re: Softop installers in Melbourne?

Postby JINBA ITTAI » Wed Aug 25, 2021 1:16 pm

Thanks all for the ideas. Might have an initial chat with the chap from SE suburbs. Would you happen to have his contact details?


93_Clubman wrote:
JINBA ITTAI wrote:looking for recommendations for a good top installer in Melbourne. How much should one budget for the install?

Can't recommend anyone in the eastern suburbs, only someone in the outer SE suburbs. Re cost, factor in about a days labour at $100 per hour - yes it's a time consuming & consequently expensive job, hence many tackle it themselves: https://www.miata.net/garage/garagetops.html

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: Softop installers in Melbourne?

Postby 93_Clubman » Thu Aug 26, 2021 12:14 am

JINBA ITTAI wrote:Might have an initial chat with the chap from SE suburbs. Would you happen to have his contact details?

Certainly, outer to far SE suburbs, Somerville & Tyabb to be precise: Gerald & Chaz @ Mammi Motors 10 Industrial Drv Somerville 5977 7973: https://www.mammimotors.repcoservice.net/
or
Richard (Dick) Morhun 7 Nelson Rd Tyabb 5977 4750 - Dick works from his big fully equipped workshop on his small acreage at Tyabb.

User avatar
JINBA ITTAI
Driver
Posts: 42
Joined: Sun May 28, 2017 12:34 pm
Vehicle: 10AE

Re: Softop installers in Melbourne?

Postby JINBA ITTAI » Thu Aug 26, 2021 11:40 am

Thanks for the tip 93_Clubman! :D


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 55 guests