Eunos 1.6 Immobiliser Issue

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

viragmakwana
Learner Driver
Posts: 14
Joined: Tue Dec 29, 2020 2:17 am
Vehicle: NA6

Eunos 1.6 Immobiliser Issue

Postby viragmakwana » Tue Dec 29, 2020 2:20 am

Hi i just purchased a 1992 Eunos Roadster 1.6L, the issue with it is it only starts up after around 4 or 5 attempts as the immobiliser cuts the engine out on the other tries, is it an immobiliser issue and is there an easy way to just remove the immobiliser to run it as im only using it over the summer. Cheers

Sent from my SM-G973F using Tapatalk

User avatar
bruce
Speed Racer
Posts: 7706
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: Eunos 1.6 Immobiliser Issue

Postby bruce » Tue Dec 29, 2020 11:29 am

It could be anything by the way you describe it.
NAs only got immobs/alarms fitted as aftermarket. If you genuinely think it is that, take it to an auto elec to remove it.

93_Clubman
Speed Racer
Posts: 11852
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: Eunos 1.6 Immobiliser Issue

Postby 93_Clubman » Wed Dec 30, 2020 1:27 am

viragmakwana wrote:is there an easy way to just remove the immobiliser

There's usually no easy way to remove them, hence Bruce's auto elec suggestion.

User avatar
Ross
Fast Driver
Posts: 174
Joined: Tue Jun 12, 2012 11:32 am
Vehicle: NA6
Location: Melbourne Eastern Suburbs

Re: Eunos 1.6 Immobiliser Issue

Postby Ross » Mon Jan 11, 2021 10:50 am

If you're carefull and pay attention to tracing one wire at a time you can DIY the removal.
I did mine after the immobiliser started to pay up.
It took a while and you will be working under the dash, so typically upside down, trying to solder thin, old wires - be prepared to drip hot solder onto yourself.
So much fun :evil:
But mine starts first time, every time now :D
Cheers
Ross

1990 BRG V-Special, NB Koni sport with King springs, MS-03's

93_Clubman
Speed Racer
Posts: 11852
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: Eunos 1.6 Immobiliser Issue

Postby 93_Clubman » Mon Jan 11, 2021 3:25 pm

you will be working under the dash, so typically upside down

For OP, if you decide not to take it auto elec & diy, then remove the driver seat so that you can lay on your back on the floor with you feet up on the rear parcel shelf to access under the dash.

manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Re: Eunos 1.6 Immobiliser Issue

Postby manga_blue » Mon Jan 11, 2021 8:38 pm

93_Clubman wrote:
you will be working under the dash, so typically upside down

For OP, if you decide not to take it auto elec & diy, then remove the driver seat so that you can lay on your back on the floor with you feet up on the rear parcel shelf to access under the dash.

Plus padding, lots of light, good clear eye protection, BMI<23

Just saw my GP this afternoon. He has done his knee in rewiring under the dash of his TR4, twisted it extricating himself
’95 NA8


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 28 guests