SE Engine bay

Discussion regarding Turbocharged and supercharged MX-5s

Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean

MrBrad
Fast Driver
Posts: 102
Joined: Thu Dec 11, 2014 4:38 pm
Vehicle: NB SE
Location: Perth, Western Australia

SE Engine bay

Postby MrBrad » Wed Apr 01, 2020 2:50 pm

Hey Guys,

does anyone have any kind of manual that has instructions on how you take apart and put together the original airbox intake setup on an NB SE?

I have a haynes manual but it doesn't have the SE and to be honest, isn't as good as what I remember Haynes manuals to be!

Cheers
Brad

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: SE Engine bay

Postby 93_Clubman » Wed Apr 01, 2020 3:48 pm

All/most of the MazdaSpeed manuals are at the following: https://drive.google.com/drive/folders/ ... 0xSNGVXMzA

User avatar
Luke
Racing Driver
Posts: 781
Joined: Sat May 23, 2009 1:11 am
Vehicle: NC
Location: Wetherill Park NSW

Re: SE Engine bay

Postby Luke » Wed Apr 01, 2020 6:02 pm

I pulled mine apart a few years back when I required access to the Turbo to install a boost controller.
There is really not much to it.
Its just Bolts, clamps, pipes and plastic junk.

As far as I remember.
Unplug intake temp sensor and MAF connector and unclip cabling from the air box. Remove vacuum pipe from air box to turbo pipe, remove air box to turbo pipe, remove top lid off the airbox, take out air filter, unbolt lower parts of air box, pull it out and your pretty much done.
DO the opposite to put it back together.


If you are also talking about removing the lower part of the intake pipe/coupler to the turbo and the outlet side, its just more clamps and pipes to pull out.
I heard a lot of people say it was super difficult to pull those rubber couplings out without breaking them, but I got mine off very easily a few years ago when I needed access to the manifold bolts as mine started loosening after many years of track work.
2022 BRZ 10AE
2021 GR Yaris
2008 Peugeot HDi Lemans, Number 1027/2000, White with Red stripes

User avatar
Lokiel
Forum legend
Posts: 4126
Joined: Thu May 28, 2009 2:39 pm
Vehicle: NB SE
Location: Brisbania

Re: SE Engine bay

Postby Lokiel » Thu Apr 02, 2020 11:49 am

93_Clubman wrote:All/most of the MazdaSpeed manuals are at the following: https://drive.google.com/drive/folders/ ... 0xSNGVXMzA

+10000000000000000000000000000000000000000000000000000000000000000000000000
"Do yourself a favour" and save all these files onto a local hard drive because one day they may disappear.
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: SE Engine bay

Postby 93_Clubman » Thu Apr 02, 2020 4:51 pm

Lokiel wrote:
93_Clubman wrote:All/most of the MazdaSpeed manuals are at the following: https://drive.google.com/drive/folders/ ... 0xSNGVXMzA

+10000000000000000000000000000000000000000000000000000000000000000000000000
"Do yourself a favour" and save all these files onto a local hard drive because one day they may disappear.

Yeah, archived them offline a while back just in case. :mrgreen:

MrBrad
Fast Driver
Posts: 102
Joined: Thu Dec 11, 2014 4:38 pm
Vehicle: NB SE
Location: Perth, Western Australia

Re: SE Engine bay

Postby MrBrad » Thu Apr 02, 2020 5:31 pm

cheers guys - I reckon that's the one!

User avatar
beavis
Forum sponsor
Posts: 1405
Joined: Mon Feb 02, 2009 12:31 pm
Vehicle: NB8B - Turbo
Location: Melbourne

Re: SE Engine bay

Postby beavis » Mon Apr 06, 2020 9:58 pm

Lokiel wrote:"Do yourself a favour" and save all these files onto a local hard drive because one day they may disappear.


It's OK, that's my link, as long as I'm alive they will stay available. :-)
Turbo NB Build Thread | BeavisMotorsport.com | YouTube.com/bbeavis | Cars: NA6, NA8-VVT, NB-Turbo, ND-2L


Return to “MX5 Forced induction (Turbo/Supercharger)”

Who is online

Users browsing this forum: No registered users and 78 guests