NC2 PRHT creaking noise while cornering
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Learner Driver
- Posts: 4
- Joined: Tue Jun 11, 2019 6:36 am
- Vehicle: NC
NC2 PRHT creaking noise while cornering
Hi - when cornering hard I experience a sharp creaking or cracking noise from the hardtop in the area of the rear of the roof panel/top of the window panel, presumably caused by body twisting or flexing. On examining the panel edges with the hardtop semi retracted I cannot see any witness marks although the noise suggests that there are some stress points. Has anyone else had this same problem, and any known way of alleviating it? Thanks - ColinW
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: NC2 PRHT creaking noise while cornering
Might be worth checking the TSBs for the relevant years: https://www.miata.net/garage/tsb/index.html
-
- Learner Driver
- Posts: 4
- Joined: Tue Jun 11, 2019 6:36 am
- Vehicle: NC
Re: NC2 PRHT creaking noise while cornering
Thanks 93_Clubman for your reply - good suggestion and will check the TSB's.
-
- Learner Driver
- Posts: 22
- Joined: Mon Oct 28, 2019 8:48 pm
- Vehicle: NC
- Location: Long Jetty NSW
Re: NC2 PRHT creaking noise while cornering
Hi Colin
Did you find a solution for this? I’ve now dríven about 1200k’s in my “new to me” NC and I’m noticing the same kind of creaking noises from the PRHT when the roof is up and the road is rough. (Which all of the fun roads seem to be).
I checked through the service bulletins and didn’t find anything. I was thinking that maybe spraying all of the contact areas with silicon spray might help?
Did you find a solution for this? I’ve now dríven about 1200k’s in my “new to me” NC and I’m noticing the same kind of creaking noises from the PRHT when the roof is up and the road is rough. (Which all of the fun roads seem to be).
I checked through the service bulletins and didn’t find anything. I was thinking that maybe spraying all of the contact areas with silicon spray might help?
Cheers
Brad
NC. Aluminium Metallic. Grey Leather. PRHT. Ohlins DFV Coilovers. RoadsterSport Headers. SuperQ Muffler. ECUTEK
The “Hiroshima Screamer”
Brad
NC. Aluminium Metallic. Grey Leather. PRHT. Ohlins DFV Coilovers. RoadsterSport Headers. SuperQ Muffler. ECUTEK
The “Hiroshima Screamer”
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: NC2 PRHT creaking noise while cornering
Brad, the NC section of the big forum might be worth a look: https://forum.miata.net/vb/forumdisplay.php?f=79
-
- Learner Driver
- Posts: 22
- Joined: Mon Oct 28, 2019 8:48 pm
- Vehicle: NC
- Location: Long Jetty NSW
Re: NC2 PRHT creaking noise while cornering
Thanks 93_Clubmn
I’ll check it out.
I’ll check it out.
Cheers
Brad
NC. Aluminium Metallic. Grey Leather. PRHT. Ohlins DFV Coilovers. RoadsterSport Headers. SuperQ Muffler. ECUTEK
The “Hiroshima Screamer”
Brad
NC. Aluminium Metallic. Grey Leather. PRHT. Ohlins DFV Coilovers. RoadsterSport Headers. SuperQ Muffler. ECUTEK
The “Hiroshima Screamer”
- Luke
- Racing Driver
- Posts: 781
- Joined: Sat May 23, 2009 1:11 am
- Vehicle: NC
- Location: Wetherill Park NSW
Re: NC2 PRHT creaking noise while cornering
Buy a soft top.
Seriously this is one of the reasons why I would never buy a folding hardtop from any marque. Long term rattles and squeaks are inevitable.
The other is when it stops working.
Seriously this is one of the reasons why I would never buy a folding hardtop from any marque. Long term rattles and squeaks are inevitable.
The other is when it stops working.
2022 BRZ 10AE
2021 GR Yaris
2008 Peugeot HDi Lemans, Number 1027/2000, White with Red stripes
2021 GR Yaris
2008 Peugeot HDi Lemans, Number 1027/2000, White with Red stripes
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: NC2 PRHT creaking noise while cornering
I have a NC retractable hard to- no creaking issue. You could check a dealer workshop. These guys see more Mazdas than most individuals so they do pick up fixes or common complaints. Silicon spray or even soap and water might pick up the cause. Having had an Nb for 9 years with soft top which spent most of the time down ( I estimate 90%) I do find the retractable top significantly more practical and comfortable- easy up and and far more durable. Hard and retractable tops are the most popular- 350 and 370 soft tops- hideous and most Porsches on the road are hard tops.
- bruce
- Speed Racer
- Posts: 7707
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: NC2 PRHT creaking noise while cornering
The benefits if a PRHT far outweigh any potential downsides. Heaps better than a soft top.
- madmort
- Fast Driver
- Posts: 272
- Joined: Fri Jun 17, 2016 9:27 am
- Vehicle: NC
- Location: Geelong
Re: NC2 PRHT creaking noise while cornering
bruce wrote:The benefits if a PRHT far outweigh any potential downsides. Heaps better than a soft top.
Until they cease to operate as intended. I'm in the soft top corner, simplicity at it's best.
- bruce
- Speed Racer
- Posts: 7707
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: NC2 PRHT creaking noise while cornering
Until someone cuts your roof open to steal the loose change in your console...
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: NC2 PRHT creaking noise while cornering
I'd swap for a PRHT or RF tomorrow if I could afford it .... I'm paranoid about where I take or park my SE for that very reason - the vulnerability of the soft top.
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
-
- Racing Driver
- Posts: 1770
- Joined: Fri May 16, 2008 1:39 pm
- Vehicle: NB8A
- Location: FarSE Melbourne
Re: NC2 PRHT creaking noise while cornering
bruce wrote:The benefits if a PRHT far outweigh any potential downsides. Heaps better than a soft top.
Except if it’s a track car where it’s extra weight in the worst possible place, and makes it harder to fit a roll bar, then a prht is a bad idea
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: NC2 PRHT creaking noise while cornering
when I was first looking for a MX5 Iinspected a vehicle close to the city of Melbourne - it was parked in a shed but not locked away. The guy was a doctor and he said one of the reasons he was selling related to multiple slashed soft tops and he said that people would do it just to see if there was any cash left in the vehicle. One slash and how much to replace - heaps. Soft tops also suffer and fail pretty quickly if they are not parked under cover.
- madmort
- Fast Driver
- Posts: 272
- Joined: Fri Jun 17, 2016 9:27 am
- Vehicle: NC
- Location: Geelong
Re: NC2 PRHT creaking noise while cornering
bruce wrote:Until someone cuts your roof open to steal the loose change in your console...
My little car is never out of my sight.
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 154 guests