See Emillio's post#3: https://www.miataturbo.net/aerodynamics-119/trackspeed-engineering-still-around-100497/
My car has all of his "good stuff", crossflow radiator, manifold and downpipe as well as a handful of other products from other manufacturers he sold on his site.
The only issue I ever had was when he sent the wrong radiator hose which he rectified immediately.
Losing a great vendor: TSE :(
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Losing a great vendor: TSE :(
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
- ManiacLachy
- Forum Guru
- Posts: 3266
- Joined: Mon Jan 13, 2014 2:35 pm
- Vehicle: NB SE
- Location: Brisbane
Re: Losing a great vendor: TSE :(
Yeah, this is unfortunate, but it seemed to be coming.
Hopefully he'll sell any his greatest bits on to other distributors, such as Supermiata (aka 949 Racing). His EFR setup (manifold, dp, oil and water lines), radiator, big brake kits, etc. He really did develop some fantastic track capable parts. He also built a lot of great track capable engines, and I think worked to find the most reliable and cost effective parts to make a strong motor that could stand the abuse.
Unfortunately, IMO, he didn't really have the capacity to effectively develop and build while running the business to it's fullest. Only so much you can do as one man.
Hopefully he'll sell any his greatest bits on to other distributors, such as Supermiata (aka 949 Racing). His EFR setup (manifold, dp, oil and water lines), radiator, big brake kits, etc. He really did develop some fantastic track capable parts. He also built a lot of great track capable engines, and I think worked to find the most reliable and cost effective parts to make a strong motor that could stand the abuse.
Unfortunately, IMO, he didn't really have the capacity to effectively develop and build while running the business to it's fullest. Only so much you can do as one man.
- bruce
- Speed Racer
- Posts: 7706
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: Losing a great vendor: TSE :(
That forum has a strange obsession with cats.
- greenMachine
- Forum Guru
- Posts: 4053
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB SE
- Location: Sports car paradise - Canberra
- Contact:
Re: Losing a great vendor: TSE :(
I saw that. Tried to visit his website, and got a 404 error
He will be missed, but hopefully the unique products will become available elsewhere, while his 'formulas' for power and reliability are pretty well known and available through MT.net.
He will be missed, but hopefully the unique products will become available elsewhere, while his 'formulas' for power and reliability are pretty well known and available through MT.net.
I never met a horsepower I didn't like (thanks bwob)
Build thread
NB SE - gone to the dark side (and loving it )
Build thread
NB SE - gone to the dark side (and loving it )
- ManiacLachy
- Forum Guru
- Posts: 3266
- Joined: Mon Jan 13, 2014 2:35 pm
- Vehicle: NB SE
- Location: Brisbane
Re: Losing a great vendor: TSE :(
The site still works for me. He hasn't closed down just yet at least.
- greenMachine
- Forum Guru
- Posts: 4053
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB SE
- Location: Sports car paradise - Canberra
- Contact:
Re: Losing a great vendor: TSE :(
Yes you are right, my link must have been out of date.
However, the cupboard is pretty bare, not much on there at all. The party is over
However, the cupboard is pretty bare, not much on there at all. The party is over
I never met a horsepower I didn't like (thanks bwob)
Build thread
NB SE - gone to the dark side (and loving it )
Build thread
NB SE - gone to the dark side (and loving it )
- SKYHI
- Racing Driver
- Posts: 1355
- Joined: Sun Apr 01, 2007 8:08 am
- Vehicle: NB SE
- Location: Brisbane
Re: Losing a great vendor: TSE :(
What a shame. A lot of R&D went into his products, and he seemed to produce some good quality stuff. I hope they are still available from other sites like 949 as mentioned.
- greenMachine
- Forum Guru
- Posts: 4053
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB SE
- Location: Sports car paradise - Canberra
- Contact:
Re: Losing a great vendor: TSE :(
May not be all bad ...
Andrew has posted "Turbo bits will remain, available through dealers later in the (northern hemisphere?) summer. BBKs, radiators, and fuel pump rewire kits will remain as well."
Just a question of when, and where to find them. Hopefully that information gets posted up in due course.
Andrew has posted "Turbo bits will remain, available through dealers later in the (northern hemisphere?) summer. BBKs, radiators, and fuel pump rewire kits will remain as well."
Just a question of when, and where to find them. Hopefully that information gets posted up in due course.
I never met a horsepower I didn't like (thanks bwob)
Build thread
NB SE - gone to the dark side (and loving it )
Build thread
NB SE - gone to the dark side (and loving it )
-
- Forum Guru
- Posts: 1525
- Joined: Fri Jun 29, 2012 9:23 pm
- Vehicle: NB8B - Turbo
- Location: Brisbane, Qld. Previously Perth WA
- Contact:
Re: Losing a great vendor: TSE :(
Definitely a shame. I have procrastinated too long on the dream to ‘build another one’
Who is online
Users browsing this forum: No registered users and 156 guests