Basically its made up of three components, the first is a 1" ball mount attached to an aluminium 90deg bracket and bolted to the centre mounting hole on the dash:
The second bit is a long RAM arm:
And the third bit is an aluminium threaded phone mount that clamps to the phone, with another RAM 1" ball bolted to it:
It has a pretty good clamp securing it to the phone like so:
Although a ziptie could also be used for further security.
I got the long RAM arm, as i figured the phone being closer would help. This is what it looks like from the drivers seat:
But a shorter or standard length arm would work too, just depends on how long you want. Also RAM do mounts for a ton of other things, so if i end up with the AIM Solo 2 down the track, then there is a mount for that too which only requires buying a new end ball.
The bits i used were:
RAM 1" ball mount: https://www.amazon.com/Mount-Motorcycle ... 005J43I56/
RAM long arm: https://www.amazon.com/gp/product/B000WJA5ZY/
In hindsight i probably should have got the M6 threaded version for the phone end, but its not in stock currently. The setup i have uses a sleeve, washer and M6 nyloc nut.
Its quite a versatile setup, and allows the entire arm and mount to be removed, leaving only the dash ball which is quite unobtrusive.
Thanks to Dean for the idea from his NB track car.
)
