Will 16x8 +25 fit NB without rolling guard

crazypsychosydney · Postby **crazypsychosydney** » Wed Dec 05, 2018 5:09 pm

Hi Guys

I think people ask this question more than millions time by now!

“Will 16x8 +25 fit NB without rolling guard”???

Thanks!

hks_kansei · Postby **hks_kansei** » Wed Dec 05, 2018 5:47 pm

I had 15x8+25 on mine, unrolled.
the guard clearance will be the same despite the diameter difference

Fit fine with 205/50/15 tyres, albeit close to the inner guard lip.
Under compression the tyres maybe cleared it by 2mm or something.

bruce · Postby **bruce** » Wed Dec 05, 2018 6:04 pm

Of course it will fit. May not after u fit a tyre to it....

crazypsychosydney · Postby **crazypsychosydney** » Wed Dec 05, 2018 7:41 pm

Thanks for the tips

Luke · Postby **Luke** » Wed Dec 05, 2018 8:46 pm

People fit 15x8's +25 with 225/50/15 tyres. Rolling is required and depending on suspension setup you may scrape guard liners under compression.
16x8 + 25 with 225/45/16 tyres fitted is very close to the same rolling diameter as above. 3mm bigger, only 1.5mm extra clearance needed.

But of course every tyres is slightly different. Yokohama A050's 225/50/15 are 240mm accross the tread face!

crazypsychosydney · Postby **crazypsychosydney** » Tue Feb 05, 2019 4:58 pm

Plan to do 16x8 +25 with 205/45

Luke · Postby **Luke** » Tue Feb 05, 2019 8:28 pm

Depending how much negative camber you run, that may fit without rolling.

ManiacLachy · Postby **ManiacLachy** » Wed Feb 06, 2019 7:23 am

As Luke is saying, you'll be very close, particularly in the rear.

I would remove the shock (reinstall without the spring if this is something you can do, like with aftermarket coilovers), fit the wheel and jack the control arm up through the full range of motion to check clearance before running it. Be prepared to roll if/as necessary. If there's the slightest rubbing, don't use them until you sort out your clearance, or you will mess up your fenders.