01/10/18 - Dodgy Day (Queensland)

Chat to do with your MX5/Miata/Eunos Garage Ride(s).

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: 01/10/18 - Dodgy Day (Queensland)

Postby Magpie » Sun Sep 02, 2018 9:58 am

adidistyle wrote:...
Rumor is this person would like to do a diff swap but has not seen this post on the forum.

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: 01/10/18 - Dodgy Day (Queensland)

Postby Magpie » Sun Sep 02, 2018 11:33 am

Jobs
  1. Gladiator - dash change out, corner weighting (no height adjustment), slight guard roll
  2. ManiacLachy - weighting and heights
  3. CrazyRacer - injector swap, initial MS3Pro PnP setup (SE), guard roll
  4. BlackLeaf - coilover swap
  5. adidistyle - diff swap (to be confirmed)

Skills needed
  1. Guard rolling (there will be a guard roller and heat gun available)
  2. MS3Pro PnP setup/initial tune

User avatar
slug_dub
Racing Driver
Posts: 1228
Joined: Fri Jun 19, 2009 11:02 pm
Vehicle: NA8
Location: Brisbane
Contact:

01/10/18 - Dodgy Day (Queensland)

Postby slug_dub » Sun Sep 02, 2018 8:11 pm

I’m happy to help with a diff swaps and coilover swaps.
My car needs a wash but I have a feeling my car washer won’t be there...


Sent from my iPhone using Tapatalk
The American wrote:hella sic stance flushing pard harker yolo something something.

Red_Bullet
Speed Racer
Posts: 3119
Joined: Tue Mar 11, 2014 8:33 pm
Vehicle: NA8 - Supercharged
Location: Brisbane

Re: 01/10/18 - Dodgy Day (Queensland)

Postby Red_Bullet » Sun Sep 02, 2018 10:57 pm

MS3 Pro, Yeah, I have some tunes for those, but then spent about 3 years fine tuning, I can send MSQ files to anybody that wants them.

Sounds like a lot to do at a dodgy day. Any flat tops booked to get the cars back home again?

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: 01/10/18 - Dodgy Day (Queensland)

Postby Magpie » Mon Sep 03, 2018 8:31 am

Red_Bullet wrote:Any flat tops booked to get the cars back home again?

Better...

Any cars left after the dodgy day finishes will follow the blue line
ImageDam by Eipeip, on Flickr

User avatar
Gladiator
Racing Driver
Posts: 1963
Joined: Tue Apr 24, 2012 2:34 pm
Vehicle: NA6
Location: Springfield Lakes

Re: 01/10/18 - Dodgy Day (Queensland)

Postby Gladiator » Mon Sep 03, 2018 2:23 pm

I’ll see you about 7:30ish, is that ok?


Sent from my iPhone using Tapatalk
"I'd rather a bottle in front of me than a frontal lobotomy"

1990 Silver Eunos NA6

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: 01/10/18 - Dodgy Day (Queensland)

Postby Magpie » Mon Sep 03, 2018 2:34 pm

Gladiator wrote:I’ll see you about 7:30ish, is that ok?
Do you want coffee?

User avatar
Lokiel
Forum legend
Posts: 4126
Joined: Thu May 28, 2009 2:39 pm
Vehicle: NB SE
Location: Brisbania

Re: 01/10/18 - Dodgy Day (Queensland)

Postby Lokiel » Mon Sep 03, 2018 2:36 pm

Magpie wrote::
Any cars left after the dodgy day finishes will follow the blue line
ImageDam by Eipeip, on Flickr

This is also a great place to "store" your MSM 17" Racing Hart rims!
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: 01/10/18 - Dodgy Day (Queensland)

Postby Magpie » Mon Sep 03, 2018 2:38 pm

Lokiel wrote: This is also a great place to "store" your MSM 17" Racing Hart rims!
I thought you advocated putting them on a NA not in a dam...

mazdaz
Fast Driver
Posts: 364
Joined: Tue Jul 17, 2012 9:41 pm
Vehicle: NC - LE
Location: West Brisbane

Re: 01/10/18 - Dodgy Day (Queensland)

Postby mazdaz » Wed Sep 05, 2018 4:28 pm

I have rolled many guards on differing cars. I have a guard roller and have done two MX5's. If I can attend I will happily do this for people. Only one proviso - your paint needs to be in good condition, sometimes even if you do get the right amount of heat in and you go easy paint will crack. All care taken - no responsibility......(I suppose it is a dodgy day..have done it before with a phone book and car jack)

User avatar
CrazyRacer
Fast Driver
Posts: 274
Joined: Sun Sep 28, 2008 5:15 pm
Vehicle: NB SE
Location: Gold Coast

Re: 01/10/18 - Dodgy Day (Queensland)

Postby CrazyRacer » Wed Sep 05, 2018 6:24 pm

Magpie wrote:
Red_Bullet wrote:Any flat tops booked to get the cars back home again?

Better...

Any cars left after the dodgy day finishes will follow the blue line
ImageDam by Eipeip, on Flickr


Does that mean you're going to make one of these out of any cars left behind?

Image

User avatar
Gladiator
Racing Driver
Posts: 1963
Joined: Tue Apr 24, 2012 2:34 pm
Vehicle: NA6
Location: Springfield Lakes

Re: 01/10/18 - Dodgy Day (Queensland)

Postby Gladiator » Wed Sep 05, 2018 8:58 pm

mazdaz wrote:I have rolled many guards on differing cars. I have a guard roller and have done two MX5's. If I can attend I will happily do this for people. Only one proviso - your paint needs to be in good condition, sometimes even if you do get the right amount of heat in and you go easy paint will crack. All care taken - no responsibility......(I suppose it is a dodgy day..have done it before with a phone book and car jack)


Everyone is welcome mate.


Sent from my iPhone using Tapatalk
"I'd rather a bottle in front of me than a frontal lobotomy"

1990 Silver Eunos NA6

User avatar
Gladiator
Racing Driver
Posts: 1963
Joined: Tue Apr 24, 2012 2:34 pm
Vehicle: NA6
Location: Springfield Lakes

Re: 01/10/18 - Dodgy Day (Queensland)

Postby Gladiator » Wed Sep 05, 2018 9:00 pm

Magpie wrote:
Gladiator wrote:I’ll see you about 7:30ish, is that ok?
Do you want coffee?


I will most probably have already had one or two.


Sent from my iPhone using Tapatalk
"I'd rather a bottle in front of me than a frontal lobotomy"

1990 Silver Eunos NA6

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: 01/10/18 - Dodgy Day (Queensland)

Postby Magpie » Sun Sep 09, 2018 10:38 am

A word of warning about the dodgy day location for those who have not been there.

If coming via Yamanto/Ipswich be aware that when turning into the driveway people do not see you. I have almost been knocked off the motorbike many times because of this :( The fun ones are when you slow down (with indicator on) to turn right into the driveway and people overtake you on the right hand side.

Take care!

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: 01/10/18 - Dodgy Day (Queensland)

Postby Magpie » Sun Sep 09, 2018 11:51 am

Gladiator - dash change out, corner weighting (no height adjustment), slight guard roll
ManiacLachy - weighting and heights
CrazyRacer - injector swap, initial MS3Pro PnP setup (SE), guard roll
BlackLeaf - coilover swap (cancelled)
adidistyle - diff swap (to be confirmed)

Skills needed
Guard rolling (there will be a guard roller and heat gun available)
MS3Pro PnP setup/initial tune

Spectating (with popcorn)
DTH
JBT

If someone has a reasonable soft top that they want to sell let me know as a person has just purchased a 1990 NA6 and the current soft top is stuffed.


Return to “MX5 Garage Chat”

Who is online

Users browsing this forum: No registered users and 187 guests