Rumor is this person would like to do a diff swap but has not seen this post on the forum.adidistyle wrote:...
01/10/18 - Dodgy Day (Queensland)
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: 01/10/18 - Dodgy Day (Queensland)
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: 01/10/18 - Dodgy Day (Queensland)
Jobs
Skills needed
- Gladiator - dash change out, corner weighting (no height adjustment), slight guard roll
- ManiacLachy - weighting and heights
- CrazyRacer - injector swap, initial MS3Pro PnP setup (SE), guard roll
- BlackLeaf - coilover swap
- adidistyle - diff swap (to be confirmed)
Skills needed
- Guard rolling (there will be a guard roller and heat gun available)
- MS3Pro PnP setup/initial tune
- slug_dub
- Racing Driver
- Posts: 1228
- Joined: Fri Jun 19, 2009 11:02 pm
- Vehicle: NA8
- Location: Brisbane
- Contact:
01/10/18 - Dodgy Day (Queensland)
I’m happy to help with a diff swaps and coilover swaps.
My car needs a wash but I have a feeling my car washer won’t be there...
Sent from my iPhone using Tapatalk
My car needs a wash but I have a feeling my car washer won’t be there...
Sent from my iPhone using Tapatalk
The American wrote:hella sic stance flushing pard harker yolo something something.
-
- Speed Racer
- Posts: 3119
- Joined: Tue Mar 11, 2014 8:33 pm
- Vehicle: NA8 - Supercharged
- Location: Brisbane
Re: 01/10/18 - Dodgy Day (Queensland)
MS3 Pro, Yeah, I have some tunes for those, but then spent about 3 years fine tuning, I can send MSQ files to anybody that wants them.
Sounds like a lot to do at a dodgy day. Any flat tops booked to get the cars back home again?
Sounds like a lot to do at a dodgy day. Any flat tops booked to get the cars back home again?
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
- Gladiator
- Racing Driver
- Posts: 1963
- Joined: Tue Apr 24, 2012 2:34 pm
- Vehicle: NA6
- Location: Springfield Lakes
Re: 01/10/18 - Dodgy Day (Queensland)
I’ll see you about 7:30ish, is that ok?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
"I'd rather a bottle in front of me than a frontal lobotomy"
1990 Silver Eunos NA6
1990 Silver Eunos NA6
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: 01/10/18 - Dodgy Day (Queensland)
Do you want coffee?Gladiator wrote:I’ll see you about 7:30ish, is that ok?
- Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Re: 01/10/18 - Dodgy Day (Queensland)
This is also a great place to "store" your MSM 17" Racing Hart rims!
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: 01/10/18 - Dodgy Day (Queensland)
I thought you advocated putting them on a NA not in a dam...Lokiel wrote: This is also a great place to "store" your MSM 17" Racing Hart rims!
-
- Fast Driver
- Posts: 364
- Joined: Tue Jul 17, 2012 9:41 pm
- Vehicle: NC - LE
- Location: West Brisbane
Re: 01/10/18 - Dodgy Day (Queensland)
I have rolled many guards on differing cars. I have a guard roller and have done two MX5's. If I can attend I will happily do this for people. Only one proviso - your paint needs to be in good condition, sometimes even if you do get the right amount of heat in and you go easy paint will crack. All care taken - no responsibility......(I suppose it is a dodgy day..have done it before with a phone book and car jack)
- CrazyRacer
- Fast Driver
- Posts: 274
- Joined: Sun Sep 28, 2008 5:15 pm
- Vehicle: NB SE
- Location: Gold Coast
- Gladiator
- Racing Driver
- Posts: 1963
- Joined: Tue Apr 24, 2012 2:34 pm
- Vehicle: NA6
- Location: Springfield Lakes
Re: 01/10/18 - Dodgy Day (Queensland)
mazdaz wrote:I have rolled many guards on differing cars. I have a guard roller and have done two MX5's. If I can attend I will happily do this for people. Only one proviso - your paint needs to be in good condition, sometimes even if you do get the right amount of heat in and you go easy paint will crack. All care taken - no responsibility......(I suppose it is a dodgy day..have done it before with a phone book and car jack)
Everyone is welcome mate.
Sent from my iPhone using Tapatalk
"I'd rather a bottle in front of me than a frontal lobotomy"
1990 Silver Eunos NA6
1990 Silver Eunos NA6
- Gladiator
- Racing Driver
- Posts: 1963
- Joined: Tue Apr 24, 2012 2:34 pm
- Vehicle: NA6
- Location: Springfield Lakes
Re: 01/10/18 - Dodgy Day (Queensland)
Magpie wrote:Do you want coffee?Gladiator wrote:I’ll see you about 7:30ish, is that ok?
I will most probably have already had one or two.
Sent from my iPhone using Tapatalk
"I'd rather a bottle in front of me than a frontal lobotomy"
1990 Silver Eunos NA6
1990 Silver Eunos NA6
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: 01/10/18 - Dodgy Day (Queensland)
A word of warning about the dodgy day location for those who have not been there.
If coming via Yamanto/Ipswich be aware that when turning into the driveway people do not see you. I have almost been knocked off the motorbike many times because of this The fun ones are when you slow down (with indicator on) to turn right into the driveway and people overtake you on the right hand side.
Take care!
If coming via Yamanto/Ipswich be aware that when turning into the driveway people do not see you. I have almost been knocked off the motorbike many times because of this The fun ones are when you slow down (with indicator on) to turn right into the driveway and people overtake you on the right hand side.
Take care!
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: 01/10/18 - Dodgy Day (Queensland)
Gladiator - dash change out, corner weighting (no height adjustment), slight guard roll
ManiacLachy - weighting and heights
CrazyRacer - injector swap, initial MS3Pro PnP setup (SE), guard roll
BlackLeaf - coilover swap (cancelled)
adidistyle - diff swap (to be confirmed)
Skills needed
Guard rolling (there will be a guard roller and heat gun available)
MS3Pro PnP setup/initial tune
Spectating (with popcorn)
DTH
JBT
If someone has a reasonable soft top that they want to sell let me know as a person has just purchased a 1990 NA6 and the current soft top is stuffed.
ManiacLachy - weighting and heights
CrazyRacer - injector swap, initial MS3Pro PnP setup (SE), guard roll
BlackLeaf - coilover swap (cancelled)
adidistyle - diff swap (to be confirmed)
Skills needed
Guard rolling (there will be a guard roller and heat gun available)
MS3Pro PnP setup/initial tune
Spectating (with popcorn)
DTH
JBT
If someone has a reasonable soft top that they want to sell let me know as a person has just purchased a 1990 NA6 and the current soft top is stuffed.
Who is online
Users browsing this forum: No registered users and 181 guests