MX5 cars, coffee & Nasho run- SEQ edition
Moderators: timk, Andrew, miata, AJ
- JBT
- Speed Racer
- Posts: 7946
- Joined: Tue Jun 03, 2003 11:00 am
- Vehicle: NC
- Location: Brisbane
Re: MX5 cars, coffee & Nasho run- SEQ edition
We'll have to find smoother roads for you next time Daffy.
-
- Speed Racer
- Posts: 3119
- Joined: Tue Mar 11, 2014 8:33 pm
- Vehicle: NA8 - Supercharged
- Location: Brisbane
Re: MX5 cars, coffee & Nasho run- SEQ edition
Daffy wrote:May need to check the stiffness of the front suspension...... some slight scrubbing on them bigger dips
https://www.youtube.com/watch?time_continue=14&v=jjsocJxdlYA
-
- Fast Driver
- Posts: 364
- Joined: Tue Jul 17, 2012 9:41 pm
- Vehicle: NC - LE
- Location: West Brisbane
Re: MX5 cars, coffee & Nasho run- SEQ edition
I have a guard roller?
- ManiacLachy
- Forum Guru
- Posts: 3266
- Joined: Mon Jan 13, 2014 2:35 pm
- Vehicle: NB SE
- Location: Brisbane
Re: MX5 cars, coffee & Nasho run- SEQ edition
I don't think the tyre is hitting the fender, it's the liner and the "spats" on the rear arches of the SE. At least, that's what it is for me in my car.
I've just picked up some shock spacers from our good friends at Beavis Motorsports that I hope will solve my problem. I'll be doing some install and testing soon.
I've just picked up some shock spacers from our good friends at Beavis Motorsports that I hope will solve my problem. I'll be doing some install and testing soon.
- Daffy
- Forum legend
- Posts: 1366
- Joined: Tue Apr 28, 2015 3:23 pm
- Vehicle: NB SE
- Location: Southern Gold Coast QLD
Re: MX5 cars, coffee & Nasho run- SEQ edition
ManiacLachy wrote:I don't think the tyre is hitting the fender, it's the liner and the "spats" on the rear arches of the SE. At least, that's what it is for me in my car.
I've just picked up some shock spacers from our good friends at Beavis Motorsports that I hope will solve my problem. I'll be doing some install and testing soon.
Red_Bullet wrote:Daffy wrote:May need to check the stiffness of the front suspension...... some slight scrubbing on them bigger dips
https://www.youtube.com/watch?time_continue=14&v=jjsocJxdlYA
I got some overdue suspension homework to do me thinks!
-
- Speed Racer
- Posts: 3119
- Joined: Tue Mar 11, 2014 8:33 pm
- Vehicle: NA8 - Supercharged
- Location: Brisbane
Re: MX5 cars, coffee & Nasho run- SEQ edition
Daffy wrote:May need to check the stiffness of the front suspension...... some slight scrubbing on them bigger dips
More info
https://www.youtube.com/watch?time_continue=143&v=mdKD2qZ4sEI
- Daffy
- Forum legend
- Posts: 1366
- Joined: Tue Apr 28, 2015 3:23 pm
- Vehicle: NB SE
- Location: Southern Gold Coast QLD
Re: MX5 cars, coffee & Nasho run- SEQ edition
Red_Bullet wrote:Daffy wrote:May need to check the stiffness of the front suspension...... some slight scrubbing on them bigger dips
More info
https://www.youtube.com/watch?time_continue=143&v=mdKD2qZ4sEI
Thanks for the link- I’m also reading through The American recent posts with his new MCA’s.....
-
- Speed Racer
- Posts: 3119
- Joined: Tue Mar 11, 2014 8:33 pm
- Vehicle: NA8 - Supercharged
- Location: Brisbane
Re: MX5 cars, coffee & Nasho run- SEQ edition
Daffy wrote:Red_Bullet wrote:Daffy wrote:May need to check the stiffness of the front suspension...... some slight scrubbing on them bigger dips
More info
https://www.youtube.com/watch?time_continue=143&v=mdKD2qZ4sEI
Thanks for the link- I’m also reading through The American recent posts with his new MCA’s.....
Not particularly recommending any particular manufacturer but the info about setting ride height/ bump travel is important, I had to do my Coilover setup twice after discovering this info. Ride height is set by spring perch adjustment, NOT by Shock body length. Magpie has had a lot of input into this same subject on another post here somewhere.
- JBT
- Speed Racer
- Posts: 7946
- Joined: Tue Jun 03, 2003 11:00 am
- Vehicle: NC
- Location: Brisbane
Re: MX5 cars, coffee & Nasho run- SEQ edition
I get what MCA have published (have their product on the BMW) but Tein (have Flex Z on the MX-5) recommend the opposite.
https://www.youtube.com/watch?v=ozz7HLIhaEI
I would like to raise the rear of the MX-5 by about 5mm but have to maintain minimum recommended engagement in the lower "cup" if extending the shock body so, this change is barely achievable. The problem with raising the spring perch to lift the ride height by that amount, is that you end up with spring bind as others have discovered.
So confusing.
https://www.youtube.com/watch?v=ozz7HLIhaEI
I would like to raise the rear of the MX-5 by about 5mm but have to maintain minimum recommended engagement in the lower "cup" if extending the shock body so, this change is barely achievable. The problem with raising the spring perch to lift the ride height by that amount, is that you end up with spring bind as others have discovered.
So confusing.
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: MX5 cars, coffee & Nasho run- SEQ edition
Not trying to derail this thread, but even BC Racing’s instructions is to set the ride height via the lower perch.
The reason they do not provide the instructions for setting length first then ride height via the spring perch is the time it takes. Most times out of the box is sufficient and good enough, however it may not be perfect.
I’m happy to help people set them up the long method if they have time (and I’m not busy).
The reason they do not provide the instructions for setting length first then ride height via the spring perch is the time it takes. Most times out of the box is sufficient and good enough, however it may not be perfect.
I’m happy to help people set them up the long method if they have time (and I’m not busy).
-
- Speed Racer
- Posts: 3119
- Joined: Tue Mar 11, 2014 8:33 pm
- Vehicle: NA8 - Supercharged
- Location: Brisbane
Re: MX5 cars, coffee & Nasho run- SEQ edition
^^^^ Yes it takes a good deal of time.
- Daffy
- Forum legend
- Posts: 1366
- Joined: Tue Apr 28, 2015 3:23 pm
- Vehicle: NB SE
- Location: Southern Gold Coast QLD
Re: MX5 cars, coffee & Nasho run- SEQ edition
Magpie wrote:Not trying to derail this thread, but even BC Racing’s instructions is to set the ride height via the lower perch.
The reason they do not provide the instructions for setting length first then ride height via the spring perch is the time it takes. Most times out of the box is sufficient and good enough, however it may not be perfect.
I’m happy to help people set them up the long method if they have time (and I’m not busy).
This is the great thing about doing runs like these for those of us that dont get to see some regular track time- good networking and quality imput from those with the groundwork experience- definitely nil derailing the thread mate, this is the bonus of doing these runs and getting a good de briefing from it
- Gladiator
- Racing Driver
- Posts: 1963
- Joined: Tue Apr 24, 2012 2:34 pm
- Vehicle: NA6
- Location: Springfield Lakes
Re: MX5 cars, coffee & Nasho run- SEQ edition
^What Daffy said.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
"I'd rather a bottle in front of me than a frontal lobotomy"
1990 Silver Eunos NA6
1990 Silver Eunos NA6
Who is online
Users browsing this forum: No registered users and 107 guests