there isnt much room to bolt it down on the drivers side.
they do suggest to have it near the fuel rail.
I have seen it mounted near the fuel tanlk on the return line but thats a fair way from the Action
any suggestion?
pics would be awesome
Fuel fex sensor mounting location
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
StanTheMan
- Forum legend
- Posts: 6824
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Balgowlah
Fuel fex sensor mounting location
Satans Ride called F33nix the resurrected NA6
-
NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Fuel fex sensor mounting location
If youve seen the rate at which your fuel system cycles and you consider the fuel in the tank is being splashed in at a high rate by the pump and therefor mixing quite a bit, you can probably justify the rear position above the fuel filter. That's what we have always done. That's how I justify it anyway, and the results have been good. Just fill the tank with the new fuel from close to empty where possible and then drive it sensibly for a few hundred metres.
Easy.
Dann
Easy.
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
StanTheMan
- Forum legend
- Posts: 6824
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Balgowlah
Re: Fuel fex sensor mounting location
OK thanks Dann.
Thats probably what I'll do then. ...saves the hassle of getting another wire through the firewall.
Thats probably what I'll do then. ...saves the hassle of getting another wire through the firewall.
Satans Ride called F33nix the resurrected NA6
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 96 guests
