B6/BP crankshaft pulley void filler?

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

RS2000
Racing Driver
Posts: 680
Joined: Mon Nov 25, 2013 7:38 am
Vehicle: NB8A
Location: Newcastle

Re: B6/BP crankshaft pulley void filler?

Postby RS2000 » Sat May 19, 2018 9:17 pm

Sorry to be pedantic, but the BP has a parallel key, not a woodruff key. A woodruff is half moon shape & the keyway slot stops short of the shaft end.
A woodruff key, on a longer crank, probably would have been a better design, but the BP seems ok if you use Loctite on the key & torque the pulley bolt correctly.

ralt
Fast Driver
Posts: 423
Joined: Thu May 19, 2011 11:10 am
Vehicle: ND - 2
Location: brisbane

Re: B6/BP crankshaft pulley void filler?

Postby ralt » Sat May 19, 2018 11:26 pm

Hi.
I just love the people who get on here and forget how old they are. You must all remember the days before the internet and before everybody became an expert. What a great time manufacturers had who produced faulty goods. No internet,no mobile phones we all lived virtually in our own little worlds and communicated by shock horror talking. Mazda knew what they had done obviously even after they and toyota and nissan had got their hands on the engine that spawned their copies- the ford bda. They should have learned but decided to save money with a design an apprentice could have bettered. I guess in a roundabout way I am saying problems were not widely reported so the damage to companies was virtually nil.

takai
Fast Driver
Posts: 181
Joined: Fri Mar 02, 2018 10:29 am
Vehicle: NA6

Re: B6/BP crankshaft pulley void filler?

Postby takai » Sun May 20, 2018 12:36 am

ralt wrote:Hi.
I just love the people who get on here and forget how old they are. You must all remember the days before the internet and before everybody became an expert. What a great time manufacturers had who produced faulty goods. No internet,no mobile phones we all lived virtually in our own little worlds and communicated by shock horror talking. Mazda knew what they had done obviously even after they and toyota and nissan had got their hands on the engine that spawned their copies- the ford bda. They should have learned but decided to save money with a design an apprentice could have bettered. I guess in a roundabout way I am saying problems were not widely reported so the damage to companies was virtually nil.


110% this. What astounds me though is that they knew what sort of bad job they did, and then did it again for the BP.

Especially given that the Toyota BDA inspired engine (the 4AGE) got it so very right. Even the BDA didnt have this sort of failure (although the oiling issues were bad enough)

StillIC
Racing Driver
Posts: 862
Joined: Sat Jan 01, 2011 2:30 pm
Vehicle: NA6
Location: Newcastle

Re: B6/BP crankshaft pulley void filler?

Postby StillIC » Mon May 21, 2018 7:16 am

takai wrote:Im not asserting it, look at the photo. Crank sensor and failed keyway.

Sorry to be pedantic but:
http://www.dictionary.com/browse/assert
Yes, you do assert that big nosed crank failures have occurred. It is another word for stating, except with confidence or assurance. I am pretty sure that this is exactly what you are doing. Right?
WP:1.12.492 SMPN:1.16.403 SMPS:1.05.473 SMPGP:1.53.256 SMPB:2.22.181

takai
Fast Driver
Posts: 181
Joined: Fri Mar 02, 2018 10:29 am
Vehicle: NA6

Re: B6/BP crankshaft pulley void filler?

Postby takai » Mon May 21, 2018 8:54 am

StillIC wrote:
takai wrote:Im not asserting it, look at the photo. Crank sensor and failed keyway.

Sorry to be pedantic but:
http://www.dictionary.com/browse/assert
Yes, you do assert that big nosed crank failures have occurred. It is another word for stating, except with confidence or assurance. I am pretty sure that this is exactly what you are doing. Right?

If you want to be pedantic, I am arguing the point. An assertion is a statement without evidence. An argument is a statement with evidence.

User avatar
PhilM
Fast Driver
Posts: 295
Joined: Fri Jul 27, 2007 9:55 pm
Vehicle: NA6
Location: Lake Macquarie

Re: B6/BP crankshaft pulley void filler?

Postby PhilM » Tue May 22, 2018 10:51 am

I have rebuilt short nose and big nose engines and the design would not have passed basic engineering principles.
Rosso Corsa Red NA V Special

93_Clubman
Speed Racer
Posts: 11852
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: B6/BP crankshaft pulley void filler?

Postby 93_Clubman » Tue May 22, 2018 11:49 am

know of maybe 2 NA6s that have had a full failure ... and only know of a single BP that's lost the keyway)

My '89 NA6 failed in 1998 at around 75k kms, & it had only ever received regular services at Mazda.
Can recall at least two BPs on here that failed (NMX516 & Wuey).

RS2000
Racing Driver
Posts: 680
Joined: Mon Nov 25, 2013 7:38 am
Vehicle: NB8A
Location: Newcastle

Re: B6/BP crankshaft pulley void filler?

Postby RS2000 » Tue May 22, 2018 6:24 pm

My question is did the BP keyways fail from the 'untouched factory state' or had some work been poorly done?
I'm guessing there's 300,000 km BP engines with pristine keyways?

StillIC
Racing Driver
Posts: 862
Joined: Sat Jan 01, 2011 2:30 pm
Vehicle: NA6
Location: Newcastle

Re: B6/BP crankshaft pulley void filler?

Postby StillIC » Wed May 23, 2018 5:12 pm

takai wrote:.....
If you want to be pedantic, I am arguing the point. An assertion is a statement without evidence. An argument is a statement with evidence.

An allegation is a statement without evidence. A confident statement without evidence is both an assertion and an allegation. An assertion with evidence is still an assertion but no longer an allegation. I cannot find any dictionary references that support your definition but many that support my usage of the word, including the one I provided. Sorry to go OT.
WP:1.12.492 SMPN:1.16.403 SMPS:1.05.473 SMPGP:1.53.256 SMPB:2.22.181

takai
Fast Driver
Posts: 181
Joined: Fri Mar 02, 2018 10:29 am
Vehicle: NA6

Re: B6/BP crankshaft pulley void filler?

Postby takai » Wed May 23, 2018 8:02 pm

OED Definition B

Allegations may have evidence, merely unproven.

User avatar
bruce
Speed Racer
Posts: 7706
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: B6/BP crankshaft pulley void filler?

Postby bruce » Wed May 23, 2018 8:46 pm

Dictionairies at twenty paces!
Word-battle over a moot issue (grab your dic-tionary for that one).


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 84 guests