Suggestions please NA6 head unit and speakers

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

adelaide_paul
Learner Driver
Posts: 15
Joined: Tue Jul 26, 2016 2:56 pm
Vehicle: NA6

Suggestions please NA6 head unit and speakers

Postby adelaide_paul » Tue Apr 17, 2018 8:46 pm

Any recommendations for a NA6?
Looking for a reasonable quality unit with Bluetooth, aux input and usb input
Speakers are to fit where the existing speakers (6.5" ?) are mounted

rpost77
Fast Driver
Posts: 164
Joined: Thu Nov 24, 2005 7:21 pm
Vehicle: NA6
Location: Sydney

Re: Suggestions please NA6 head unit and speakers

Postby rpost77 » Tue Apr 17, 2018 10:47 pm

For what it's worth - this is what I replaced my NA6 (1991) standard unit with.

Clarion CX609A - Double Din unit - http://www.clarion.com/au/en/products/2 ... 21675.html

Has tuner, CD, Aux input (front), USB input (rear), Bluetooth (don't actually use this).

Colours (display, dials, buttons) are customisable so I have set them to a similar green as the dash display/old head unit.

Rear USB is good - have run this via extension under the centre console into the centre console cubby (armrest) and can connect iPod or iPhone to it - control the iPod/iPhone via head unit controls (I actually leave an iPod Nano connected all the time).

Sound is via Sony Speakers (cannot remember now model) and they are really good (especially compared to originals). Have purchased Polk Audio speakers a while ago to install but haven't gotten to yet (and the Sonys are pretty good so probably won't until they crap out).

Went for Double Din to maximise the hole in the dash. Also went for this unit as (I feel) it better fits the aesthetic of the NA6 rather than a flashy all-dancing unit. Managed to locate a bezel that fits nicely so it all looks stock and neat.

Don't think you can get that particular model anymore but similar can be had.

Also - if you are replacing a stock unit - do what I did - don't hack into the existing wiring loom (i.e. cut off connectors etc.) - I ended up buying connectors, pins etc. (Jaycar and other places) and wired the new head unit wires into connectors that I could plug into existing loom connectors. Neater and if ever decide to restore original it's easy.

Lots of info here and miata.net on wiring pinouts etc. to help.

User avatar
ManiacLachy
Forum Guru
Posts: 3266
Joined: Mon Jan 13, 2014 2:35 pm
Vehicle: NB SE
Location: Brisbane

Re: Suggestions please NA6 head unit and speakers

Postby ManiacLachy » Wed Apr 18, 2018 8:28 am

I can't help with headunit, sorry. But this post is my bible for speakers:
http://mx5cartalk.com/forum/viewtopic.php?f=55&t=73130&p=897008&hilit=speaker+focal#p897008

muzzy's post is fantastic, pick a price point that suits your budget. Personally I'm looking at either Entry Level or Mid Entry Level as he's described it. I don't see the point of going for a balla sound system in an MX-5, YMMV.

User avatar
bruce
Speed Racer
Posts: 7706
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: Suggestions please NA6 head unit and speakers

Postby bruce » Wed Apr 18, 2018 10:51 am

Whatever u buy, add small speakers into the headrests (factory cutouts are standard).


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 103 guests