Noisy rear end under load at low rpm

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

IanR
Racing Driver
Posts: 501
Joined: Wed Feb 18, 2015 9:12 am
Vehicle: NB8A - Turbo
Location: Newcastle, NSW

Re: Noisy rear end under load at low rpm

Postby IanR » Thu Mar 08, 2018 8:28 pm

Thanks Lachy, gives me hope that I’ll find it.


Sent from my iPhone using Tapatalk

IanR
Racing Driver
Posts: 501
Joined: Wed Feb 18, 2015 9:12 am
Vehicle: NB8A - Turbo
Location: Newcastle, NSW

Re: Noisy rear end under load at low rpm

Postby IanR » Thu Apr 05, 2018 4:19 pm

IanR wrote:Thanks Lachy, gives me hope that I’ll find it.

Had the clutch pulled out and the springs were loose causing the rattle at low motor rpms. Most of the noises gone now!

Sent from my iPhone using Tapatalk

Image



Sent from my iPhone using Tapatalk

IanR
Racing Driver
Posts: 501
Joined: Wed Feb 18, 2015 9:12 am
Vehicle: NB8A - Turbo
Location: Newcastle, NSW

Re: Noisy rear end under load at low rpm

Postby IanR » Thu Apr 05, 2018 4:19 pm

IanR wrote:
IanR wrote:Thanks Lachy, gives me hope that I’ll find it.

Had the clutch pulled out and the springs were loose causing the rattle at low motor rpms. Most of the noises gone now!

Sent from my iPhone using Tapatalk

Image



Sent from my iPhone using Tapatalk

The fix was a new clutch plate.


Sent from my iPhone using Tapatalk

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Noisy rear end under load at low rpm

Postby NitroDann » Thu Apr 05, 2018 6:17 pm

That's a fantastic find, and thanks heaps for sharing it with us. I've wondered for years.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

IanR
Racing Driver
Posts: 501
Joined: Wed Feb 18, 2015 9:12 am
Vehicle: NB8A - Turbo
Location: Newcastle, NSW

Re: Noisy rear end under load at low rpm

Postby IanR » Thu Apr 05, 2018 7:21 pm

NitroDann wrote:That's a fantastic find, and thanks heaps for sharing it with us. I've wondered for years.

Dann


No worries. The mech wasn’t suprised and had even predicted it as one of the common “hard to pinpoint” drivetrain noises.

I took a video of how much noise shaking the plate made, I’ll see if I can post it.

Car is much quieter and more enjoyable to drive at low speeds. Win!


Sent from my iPhone using Tapatalk


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 84 guests