Hi members
Where is the ECU on the SP. is it the grey plastic box in the passenger footwell.
ECU location SP
Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean
- roshmx5
- Fast Driver
- Posts: 157
- Joined: Tue Sep 20, 2016 10:17 pm
- Vehicle: NB SP
ECU location SP
Mazda MX5 SP
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: ECU location SP
Yes mate.
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
- greenMachine
- Forum Guru
- Posts: 4054
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB SE
- Location: Sports car paradise - Canberra
- Contact:
Re: ECU location SP
I don't think so. Maybe the SP was different to the NB8B, but in the NB8B it is an aluminium box, under an aluminium cover, on the firewall under the carpet almost at floor level. If the passenger rests their feet against the sloped 'firewall', they will be resting on the ECU cover.
To get to the ECU, lift the carpet, which gives access to the cover - this has to be removed to access the ECU.
I think you are looking up behind the glovebox, that is the HVAC stuff.
Again, I stand to be corrected if the SP ECU was relocated from the standard NB8B configuration.
To get to the ECU, lift the carpet, which gives access to the cover - this has to be removed to access the ECU.
I think you are looking up behind the glovebox, that is the HVAC stuff.
Again, I stand to be corrected if the SP ECU was relocated from the standard NB8B configuration.
I never met a horsepower I didn't like (thanks bwob)
Build thread
NB SE - gone to the dark side (and loving it )
Build thread
NB SE - gone to the dark side (and loving it )
- Locutus
- Racing Driver
- Posts: 879
- Joined: Thu Jul 26, 2007 7:39 pm
- Vehicle: NB SP
- Location: Sydney
- Contact:
Re: ECU location SP
I think Dann misread the question. The SP ECU is in the OEM location location as described above. I'm pretty sure all the covers are steel- they are far too heavy to be aluminium.
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: ECU location SP
I figured the plastic bit was simply mistaken.
Its a grey box in the passenger footwell for sure.
Dann
Its a grey box in the passenger footwell for sure.
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
- Fast Driver
- Posts: 272
- Joined: Tue Jan 03, 2017 2:53 pm
- Vehicle: NB SE
Re: ECU location SP
Watch your fingers, the covers bite
- roshmx5
- Fast Driver
- Posts: 157
- Joined: Tue Sep 20, 2016 10:17 pm
- Vehicle: NB SP
-
- Speed Racer
- Posts: 3120
- Joined: Tue Mar 11, 2014 8:33 pm
- Vehicle: NA8 - Supercharged
- Location: Brisbane
Re: ECU location SP
wasp47 wrote:Watch your fingers, the covers bite
I can vouch for that, wear gloves. Then once you have it out remove the burs with a file.
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: No registered users and 259 guests