anyone fitted quickrelases to the NA bumper?

shirtz · Postby **shirtz** » Thu Jan 18, 2018 1:29 pm

my na is stock height with a lip and I already cant get a jack under it. its only going to get worse when I get coilovers! ive seen Bevis do quick release pins on his NB, but has anyone done it on their NA?

ie

http://beavismotorsport.com/store/quick ... latch.html

or those rubber band ones..

shirtz · Postby **shirtz** » Tue Jan 23, 2018 12:44 pm

anyone? surely this is not just a problem for me!

bruce · Postby **bruce** » Tue Jan 23, 2018 1:29 pm

People buy a low profile jack.
Fitting quick releases seem a bit dangerous. You don't want your bumper falling off as you drive along, or even if you have a small nudge.

smy0003 · Postby **smy0003** » Tue Jan 23, 2018 2:41 pm

What Bruce said, they also look awful and require you to drill holes in your bumper and wings. Even with the quick releases it will still be a pain to undo all the other bolts every single time you need to raise the car.

Buy a Costco Arcane (?) low profile jack, and get some wooden ramps if you need that little bit of extra clearance.

shirtz · Postby **shirtz** » Tue Jan 23, 2018 2:42 pm

thanks guys. have the Costco jack but gets stuck on the front lip. will have to knock up some wood ramps...

ManiacLachy · Postby **ManiacLachy** » Tue Jan 23, 2018 2:49 pm

I'm lowered a little, but even with a low profile jack I have I can't get to the front jacking point with the car on it's wheels. I use a crappy Supercheap jack on the pinch weld to raise one corner off the ground, then using my low profile jack I can get under the front. The extra step doesn't add much time.

greenMachine · Postby **greenMachine** » Tue Jan 23, 2018 7:44 pm

Don't be a wuzz Lachy, give the man a link to your ramps thread :wink:

shirtz · Postby **shirtz** » Wed Jan 24, 2018 8:50 am

greenMachine wrote:Don't be a wuzz Lachy, give the man a link to your ramps thread

haha now im curious!

but yeah, the raise one side method or get wood ramps seems to be the best thus far.

ManiacLachy · Postby **ManiacLachy** » Wed Jan 24, 2018 9:17 am

greenMachine wrote:Don't be a wuzz Lachy, give the man a link to your ramps thread

My ramps thread? I do have some wooden ramps, but I don't think I've discussed them. Even using them to get the car up slightly I still need to jack from the side, the low profile jack's "hump" is too big to fit under the lip and I can't see what what I'm doing anyway. Maybe I need to add some extra height to my ramps.

greenMachine · Postby **greenMachine** » Wed Jan 24, 2018 1:03 pm

ManiacLachy wrote:
greenMachine wrote:Don't be a wuzz Lachy, give the man a link to your ramps thread

My ramps thread? I do have some wooden ramps, but I don't think I've discussed them. Even using them to get the car up slightly I still need to jack from the side, the low profile jack's "hump" is too big to fit under the lip and I can't see what what I'm doing anyway. Maybe I need to add some extra height to my ramps.

Bummer! It was Rocky's thread I was (mis-)remembering

Ramp-age