So then I set about putting stuff back together. The headlight assemblies are back in place, as is the fuel cap. Floor carpet is in. So is the wiring & the heater box & fan motor. I have fitted the bootlid only to have somewhere to keep it.
Then I started on the left hand door. A while ago I grabbed a set door guides off Rolley, so it was time to fit them. But first I removed the regulator & channels gave them a good clean. There was so much old crappy grease in there. Then refit all the bits that came off the door, and fit the door to the car.
It’s been a huge day with some great progress.




Sent from my iPhone using Tapatalk