Oil temp gauge
Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel
-
- Driver
- Posts: 41
- Joined: Thu Oct 12, 2017 5:16 pm
- Vehicle: NB8A
Oil temp gauge
Hi guys went on 2Hr drive today and noticed the oil temperature gauge rising it normally sits pretty high but noticed it crepping up toward the 3/4 mark.I was sitting on 100-110 in fith gear.Im just wondering if this is normal. My car is a stock 2000 5 speed NB. Any feedback would be welcomed. Thanks Michael.
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Oil temp gauge
It's oil pressure and on an NB its not supposed to move once the car has started.
Dann
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
- Driver
- Posts: 41
- Joined: Thu Oct 12, 2017 5:16 pm
- Vehicle: NB8A
Re: Oil temp gauge
Thanks for the reply. Does this mean I have a promblem?
- bootz
- Racing Driver
- Posts: 891
- Joined: Thu Aug 19, 2010 1:13 pm
- Vehicle: NB8B
- Location: The Wild Wild West
-
- Racing Driver
- Posts: 680
- Joined: Mon Nov 25, 2013 7:38 am
- Vehicle: NB8A
- Location: Newcastle
Re: Oil temp gauge
I'd say no problem. You sure it was creeping up, because that's unusual.
The gauge doesn't show the actual pressure, just indicates that you have at least the minimum pressure required.
An oil light would be more useful !
The gauge doesn't show the actual pressure, just indicates that you have at least the minimum pressure required.
An oil light would be more useful !
- KevGoat
- Speed Racer
- Posts: 3960
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: Oil temp gauge
The stock gauge is useless, just a switch ... it's either ok or engine detonation. Swap it out for a real sensor and gauge.
-
- Driver
- Posts: 41
- Joined: Thu Oct 12, 2017 5:16 pm
- Vehicle: NB8A
Re: Oil temp gauge
Thanks for the replies? I was freaking out , thought I might need an engine rebuild or something
Who is online
Users browsing this forum: No registered users and 11 guests