Shop in Brisbane that can look at a megasquirt

Hugo999 · Postby **Hugo999** » Tue Sep 26, 2017 10:38 pm

Hello,
I have been struggling with a ignition problem where I have only one coil firing on my 91 mx5. I have been through basically every ignition part I can think of and the car is still misfiring. This leads me to think it can only be the ecu causing this. Does anyone know of a shop or someone that can diagnose a faulty ignition circuit in a megasquirt DIYPNP in the Brisbane area?

Thanks, Hugo.

Postby **NitroDann** » Tue Sep 26, 2017 11:17 pm

It's probably the ECU this is why I don't touch hand built ones anymore

Hugo999 · Postby **Hugo999** » Tue Sep 26, 2017 11:30 pm

Have put new plugs, leads, ignitor on the car. Tested coilpacks and CAS and proved both working. Wiring checks out on continuity. Can only be the ecu then I think?

Have this all detailed on another forum but not sure if I am allowed to post it here. Also have datalog but I'm not skilled enough to read it myself (https://goo.gl/rW4DtL).

Going insane trying to diagnose this and hoping someone in Brisbane knows what they are doing with a megasquirt and can have a look at it.

tang0_au · Postby **tang0_au** » Fri Sep 29, 2017 12:29 pm

similar question - would like a shop to dyno tune my plug n play ... everything works, just needs a final tune ...

Magpie · Postby **Magpie** » Fri Sep 29, 2017 2:10 pm

Try https://www.facebook.com/PHDYNO/

wasp47 · Postby **wasp47** » Fri Sep 29, 2017 8:15 pm

I realise its not Brisbane but CHIPTORQUE at Nerang should be able to assist, They are within easy walking distance from the station should you need to leave your 5 there . Lachlan Is the man to talk to.
Cheers
Steven