oil restrictor ...

tang0_au · Postby **tang0_au** » Mon Jul 24, 2017 11:17 am

brains trust: is there a formula or recommendation for what size oil restrictor to use in a chinabay GT 2760 (i think) floating bearing turbo ?

Postby **NitroDann** » Mon Jul 24, 2017 11:30 am

Just use the head feed port with no restrictor.

itll be sweet.

Postby **NitroDann** » Mon Jul 24, 2017 11:31 am

Just use the head feed port with no restrictor.

itll be sweet.

Todd77 · Postby **Todd77** » Mon Jul 24, 2017 12:31 pm

1.6 mm

Postby **NitroDann** » Mon Jul 24, 2017 12:47 pm

NitroDann wrote:Just use the head feed port with no restrictor.

itll be sweet. just like sp

Todd77 · Postby **Todd77** » Mon Jul 24, 2017 1:32 pm

NitroDann wrote:
NitroDann wrote:Just use the head feed port with no restrictor.

itll be sweet. just like sp

It's just how I set them up, they only need a mist of oil, flooding the bearing can cause slowed boost response ( grab a roller bearing spin it dry, then flood it with oil and spin it.... ) plus there is no need to loose oil pressure thru the turbo. It's not needed. $3 restrictor. But that's just me. I'm no expert!!!

Postby **NitroDann** » Mon Jul 24, 2017 5:18 pm

I meant to edit the first one to add "just like SP". Not repost over you todd.

I agree nothing wrong with that.

Dann

Todd77 · Postby **Todd77** » Mon Jul 24, 2017 6:55 pm

NitroDann wrote:I meant to edit the first one to add "just like SP". Not repost over you todd.

I agree nothing wrong with that.

Dann

Are you saying we agree on something!

tang0_au · Postby **tang0_au** » Tue Jul 25, 2017 2:18 pm

thanks ...

I already have everything hooked up to the port on the block next to the flywheel - have made up a 1.5mm restrictor that should flow enough ..