Hard starting NB8B

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
1600Dave
Fast Driver
Posts: 146
Joined: Tue May 05, 2015 9:32 am
Vehicle: NB8B
Location: Newcastle, NSW

Hard starting NB8B

Postby 1600Dave » Sat Jul 01, 2017 12:30 am

OK, slightly strange issue. Car has been harder to start over the last few months - takes 4-5 seconds of cranking before it will fire. Does this whether its hot or cold. Always starts, just takes a while. If you turn the car off and straight back on, it fires up OK. Leave it sit for a while, takes longer to fire.

However, if I turn the key to "On", wait for 5 seconds, then crank it over, it will start within 1-2 seconds every time.

I've replaced the fuel pump, I thought perhaps it was getting a bit lazy, but that didn't make a difference.

Any suggestions would be appreciated, its more an annoying problem than anything major.

User avatar
jordan.k
Fast Driver
Posts: 113
Joined: Mon Oct 17, 2016 2:39 am
Vehicle: NA6 - Turbo

Re: Hard starting NB8B

Postby jordan.k » Sat Jul 01, 2017 2:38 am

If you're saying its fine after you let it prime i'd put my money on the fuel filter being a bit clogged. Probably due for a change anyway.

Have had similar issues on other cars and changing the fuel filter improved starting time noticeably. GL
NA6 Dulux spec

User avatar
1600Dave
Fast Driver
Posts: 146
Joined: Tue May 05, 2015 9:32 am
Vehicle: NB8B
Location: Newcastle, NSW

Re: Hard starting NB8B

Postby 1600Dave » Sat Jul 01, 2017 11:02 am

Ta, I'll grab one and see how it goes.

93_Clubman
Speed Racer
Posts: 11852
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: Hard starting NB8B

Postby 93_Clubman » Sat Jul 01, 2017 11:36 am

+1 for fuel filter as first thing to replace.

Todd77
Driver
Posts: 90
Joined: Tue Jun 02, 2015 10:06 pm
Vehicle: NA8 - Turbo

Re: Hard starting NB8B

Postby Todd77 » Tue Jul 04, 2017 11:27 pm

jordan.k wrote:If you're saying its fine after you let it prime i'd put my money on the fuel filter being a bit clogged. Probably due for a change anyway.

Have had similar issues on other cars and changing the fuel filter improved starting time noticeably. GL


Spot on!!!!!

User avatar
bruce
Speed Racer
Posts: 7706
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: Hard starting NB8B

Postby bruce » Wed Jul 05, 2017 4:19 pm

Sounds like a battery too.
This cold weather does mean difficult starting.

User avatar
beavis
Forum sponsor
Posts: 1405
Joined: Mon Feb 02, 2009 12:31 pm
Vehicle: NB8B - Turbo
Location: Melbourne

Re: Hard starting NB8B

Postby beavis » Thu Jul 06, 2017 2:08 pm

bruce wrote:Sounds like a battery too.
This cold weather does mean difficult starting.


While that is very true, it probably wouldn't explain his symptom of "if I turn the key to "On", wait for 5 seconds, then crank it over, it will start within 1-2 seconds every time."
Turbo NB Build Thread | BeavisMotorsport.com | YouTube.com/bbeavis | Cars: NA6, NA8-VVT, NB-Turbo, ND-2L

RS2000
Racing Driver
Posts: 680
Joined: Mon Nov 25, 2013 7:38 am
Vehicle: NB8A
Location: Newcastle

Re: Hard starting NB8B

Postby RS2000 » Thu Jul 06, 2017 3:06 pm

1600Dave wrote:OK, slightly strange issue. Car has been harder to start over the last few months - takes 4-5 seconds of cranking before it will fire. Does this whether its hot or cold. Always starts, just takes a while. If you turn the car off and straight back on, it fires up OK. Leave it sit for a while, takes longer to fire.


My track NB has been exactly the same for the almost 4 years I've had it. A new fuel filter didn't make any difference. I've tried jumper leads as battery ground & engine ground, but still the same. The strange part is the instant firing on the second start. It performs fine, so I've ignored it.

93_Clubman
Speed Racer
Posts: 11852
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: Hard starting NB8B

Postby 93_Clubman » Thu Jul 06, 2017 4:40 pm

Yeah, a few forumites have experienced this issue without resolution. Just had a look at Mazda TSBs & found following (Engine hard to start/ excessive cranking time) for NB8A: https://www.miata.net/garage/tsb/sb003_99.html
From memory I think some have also found replacing or checking & cleaning up the Main relay aka EGI relay in the engine bay fuse box has also helped.

User avatar
1600Dave
Fast Driver
Posts: 146
Joined: Tue May 05, 2015 9:32 am
Vehicle: NB8B
Location: Newcastle, NSW

Re: Hard starting NB8B

Postby 1600Dave » Thu Jul 06, 2017 7:53 pm

RS2000 wrote:It performs fine, so I've ignored it.


Likewise. No dramas otherwise, its now becoming my routine to get in the car, turn key to "On", get settled, put seatbelt on, etc, then start it. Starts fine that way, but jump in and try to start it straightaway and it always takes a fair bit of cranking.


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 42 guests