Tps doesn't calibrate

Coote_00 · Postby **Coote_00** » Tue May 16, 2017 6:34 pm

Hey having issues calibrating tps on a auto na 1.6
It won't read any current and In tuner studio it says -12 Is getting power when testing with multimeter
And when I go to get current in the calibrate tps it stays on 0 for both closed and open throttle any advice cheers

StanTheMan · Postby **StanTheMan** » Tue May 16, 2017 6:38 pm

Is it a variable TPS.?
Guaranteed?

That's what mine does. Mine is the standard type.
I use MAPdot. For now.
When you say tuner studios I'm assuming you're installing a Megasquirt .

Coote_00 · Postby **Coote_00** » Tue May 16, 2017 6:44 pm

Yes I believe so it has 4 pins not 3 and I've had it working just had install a new motor old one was a short nose but since new motor install it doesn't seem to want to get a signal and yes it's running megasquirt
Also idle is stuck at around 2k

StanTheMan · Postby **StanTheMan** » Tue May 16, 2017 7:05 pm

Is the idle valve the old one from your previous engine or the one that came with the new engine?
Did you tune the previous engine ? Or is this the first time tuning?