Any one yet to put 17" 6ul's on an nb.
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
Mr Sexy
- Fast Driver
- Posts: 264
- Joined: Fri May 11, 2012 7:46 pm
- Vehicle: ND - 2
- Location: Western Australia
Any one yet to put 17" 6ul's on an nb.
Just curious to see if any one knows or has seen any one run 17"6ul nd wheels on a nb, have had a look on google but arnt able to find any thing. I'm a very big fan of the 6uls but I find 15's look a little too small on nb's. Now that theres a distributor again in aus I thought why not.
-
davekmoore
- Speed Racer
- Posts: 4681
- Joined: Thu Apr 30, 2009 1:53 am
- Vehicle: NC
- Location: Esprick, UK
Re: Any one yet to put 17" 6ul's on an nb.
Or why?
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)
-
NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Any one yet to put 17" 6ul's on an nb.
@Lokiel
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
sailaholic
- Speed Racer
- Posts: 3511
- Joined: Thu May 19, 2011 3:38 pm
- Vehicle: NA8
- Location: Brisbane
Re: Any one yet to put 17" 6ul's on an nb.
I heard Lokiel was a foundation purchaser of two sets. He always said 17" was the best wheel for a SE if only he could find something lighter then the already feather weight racing harts.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Re: Any one yet to put 17" 6ul's on an nb.
17" 6ULs don't come in 4x100 stud pattern. Emilio doesn't believe NA/NBs need 17" rims and neither does anyone with common sense, especially me.
I did sarcastically chuckle at the previous 2 posts.
I did sarcastically chuckle at the previous 2 posts.
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
-
project.r.racing
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: Any one yet to put 17
Yes they do.Lokiel wrote:17" 6ULs don't come in 4x100 stud pattern.
http://949racing.com/17x8-6UL-4Lug.aspx
http://949racing.com/17x9-6UL-4Lug.aspx
-
smy0003
- Racing Driver
- Posts: 1870
- Joined: Mon Dec 30, 2013 12:35 pm
- Vehicle: NA8
- Location: Melbourne
Re: Any one yet to put 17" 6ul's on an nb.
They made them for the ND.
As long as the offset is sensible, and I'm pretty sure it is, theyll fit fine.
*obligatory 15" master-race statement*
Sent from my LG-H815 using Tapatalk
As long as the offset is sensible, and I'm pretty sure it is, theyll fit fine.
*obligatory 15" master-race statement*
Sent from my LG-H815 using Tapatalk
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8
Now: Chaste White NA8
-
zossy1
- Racing Driver
- Posts: 1979
- Joined: Wed Aug 18, 2010 8:48 am
- Vehicle: NA8
- Location: Southern Highlands, NSW
- Contact:
Re: Any one yet to put 17" 6ul's on an nb.
smy0003 wrote:They made them for the ND.
As long as the offset is sensible, and I'm pretty sure it is, theyll fit fine.
*obligatory 15" master-race statement*
Sent from my LG-H815 using Tapatalk
+45mm offset is not sensible... Not for an NA/NB...
-
Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Re: Any one yet to put 17
project.r.racing wrote:Yes they do.Lokiel wrote:17" 6ULs don't come in 4x100 stud pattern.
http://949racing.com/17x8-6UL-4Lug.aspx
http://949racing.com/17x9-6UL-4Lug.aspx
Whoops, I'm woefully out of date (17" 6ULs were originally for NCs).
zossy1 pointed out that the 17" 6ULs are offset +45mm - the 17x7 MSM/SE Racing Hart "boat anchors" have a +40 offset.
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
-
smy0003
- Racing Driver
- Posts: 1870
- Joined: Mon Dec 30, 2013 12:35 pm
- Vehicle: NA8
- Location: Melbourne
Re: Any one yet to put 17" 6ul's on an nb.
zossy1 wrote:smy0003 wrote:They made them for the ND.
As long as the offset is sensible, and I'm pretty sure it is, theyll fit fine.
*obligatory 15" master-race statement*
Sent from my LG-H815 using Tapatalk
+45mm offset is not sensible... Not for an NA/NB...
I assumed they were +38 like the 15x8's.
Ma bad.
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8
Now: Chaste White NA8
-
hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Any one yet to put 17" 6ul's on an nb.
A 5mm offset difference is hardly going to cause issues.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
-
pcmx5
- Racing Driver
- Posts: 1648
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: ND - 2
- Location: Geelong Vic.
- Contact:
Re: Any one yet to put 17" 6ul's on an nb.
Agree! Wheels that crack might though.Any assurances that they are better than the earlier ones that had issues?I couldn't get that assurance (no response)so didn't go there.Would be nice to have some statement from manufacturer and agents.
Not trying to be smart but concerned.
Peter.
Not trying to be smart but concerned.
Peter.
.Now ND2 Roadster prev NC2 Recaro's ,BBS wheels,full exhaust, Tiens NA 1.6.NA 1.8 LE(106RWKW)NC1,NC2.ND 1.5 .
-
Nevyn72
- Speed Racer
- Posts: 2189
- Joined: Fri Nov 29, 2013 8:51 am
- Vehicle: ND - RF
- Location: Sydney
Re: Any one yet to put 17" 6ul's on an nb.
hks_kansei wrote:A 5mm offset difference is hardly going to cause issues.
Unfortunately the combination of a 5mm lesser offset with a 1" or 2" wider rim (NB = 6.5" or 7" for the SE, 6UL = 8" or 9") mean that they don't fit in a NB wheel arch without rubbing.
Remember that the SE had a 0.5" wider rim with the same offset and rolling diameter as the standard 16" rim but needed to have a reduced turning radius in the steering rack from the factory to prevent issues.
The 17" 6UL would need an offset of ~30 (even less for the 9" version) to be an ok fit........
"A Convertible has a top you can put down when the weather's nice...... A Roadster has a top you can put up when the weather's bad."
-
pcmx5
- Racing Driver
- Posts: 1648
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: ND - 2
- Location: Geelong Vic.
- Contact:
Re: Any one yet to put 17" 6ul's on an nb.
Yes, forgot about the increase in width,would be an issue!
Peter.
Peter.
.Now ND2 Roadster prev NC2 Recaro's ,BBS wheels,full exhaust, Tiens NA 1.6.NA 1.8 LE(106RWKW)NC1,NC2.ND 1.5 .
-
zossy1
- Racing Driver
- Posts: 1979
- Joined: Wed Aug 18, 2010 8:48 am
- Vehicle: NA8
- Location: Southern Highlands, NSW
- Contact:
Re: Any one yet to put 17" 6ul's on an nb.
+45mm will fit NA/NB in 17x8, but only if:
1. You are running coilovers with 2.5" or smaller Spring diameter; and
2. You remove plastic inner guard; and
3. You limit tyre size to 205/40/17.
Alternatively you can run extended studs and a spacer.
17x9 in +45mm won't fit NA/NB without some more drastic mods.
But... Why would you?
1. You are running coilovers with 2.5" or smaller Spring diameter; and
2. You remove plastic inner guard; and
3. You limit tyre size to 205/40/17.
Alternatively you can run extended studs and a spacer.
17x9 in +45mm won't fit NA/NB without some more drastic mods.
But... Why would you?
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 66 guests
