Allmaz Thankyou for your spotless welds!
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
Allmaz Thankyou for your spotless welds!
So I'm doing the timing belt again after 300,000 km.
I remove the strut brace radiator cam cover etc.
Then I remove the 21mm crank bolt...
My woodruff key has been welded into place!
Thankyou Allmaz for making my day beautiful!
I remove the strut brace radiator cam cover etc.
Then I remove the 21mm crank bolt...
My woodruff key has been welded into place!
Thankyou Allmaz for making my day beautiful!
every ounce counts
-
- Forum Guru
- Posts: 4897
- Joined: Mon Apr 24, 2006 7:27 pm
- Vehicle: NA8
- Location: Moruya, NSW
Re: Allmaz Thankyou for your spotless welds!
Holy crap, Wun! Did they weld the drive pulley onto the crank nose as well? How did you manage to get it off?
’95 NA8
-
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
Re: Allmaz Thankyou for your spotless welds!
Yeah its stuck, so I can't get behind it to replace the front main seal.
I like how Allmaz say "no warranty provided"
I like how Allmaz say "no warranty provided"
every ounce counts
-
- Forum Guru
- Posts: 4897
- Joined: Mon Apr 24, 2006 7:27 pm
- Vehicle: NA8
- Location: Moruya, NSW
Re: Allmaz Thankyou for your spotless welds!
At this stage I'd just give up any thoughts of servicing, put it back together again and drive it until the timing belt breaks or the seal fails. That could be another one or two hundred thousand Ks. Given the milage on it already I'd be starting a long leisurely hunt for a younger motor.
edit: ah, I notice you have already started that.
’95 NA8
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Allmaz Thankyou for your spotless welds!
That sucks, really bad.
I thight they were better than that.
They've always been good to me, but sh*t that's not just cutting a corner, that's skipping he whole road.
I'd be calling them and asking for an explanation.
I thight they were better than that.
They've always been good to me, but sh*t that's not just cutting a corner, that's skipping he whole road.
I'd be calling them and asking for an explanation.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
- Steampunk
- Speed Racer
- Posts: 4670
- Joined: Wed Oct 10, 2007 9:16 am
- Vehicle: NA6
- Location: Southside of Breeze-bane
Re: Allmaz Thankyou for your spotless welds!
Take them all the way to tribunal. That's gotta be about 30grams of extra unnecessary weight right there.
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: Allmaz Thankyou for your spotless welds!
That's just rubbish and they ought to be told - and the cost for diagnosing the fault is well overpriced. . I would not be giving out any recommendations for this crew. i.e. remove from list.
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Allmaz Thankyou for your spotless welds!
Crikey $554 for the diagnostic & that fix!
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: Allmaz Thankyou for your spotless welds!
Wow that even makes my complete lack of welding skills look good!
I'd be slapping that down on their counter and asking wtf?!
Sent from my S7 on Tapatalk
I'd be slapping that down on their counter and asking wtf?!
Sent from my S7 on Tapatalk
-
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
Re: Allmaz Thankyou for your spotless welds!
Yeah I can stick weld better than that (and I'm half blind genetically)
So my goal is to new crank pully new woodruff key and new boss hub oh and new crank bolt. The welds were too brittle and the boss hub spins freely on the crank nose. I was tempted to put it all back together with just a new belt...
Will probably go down the loctite 660 road. At 300,000 I guess the engine has had a good life, a new engine will be my summer project. I'm happy if my fix lasts untill the end of the year.
What shits me is I need to replace that oil-seal at the front, it's leaking quite badly probably damaged from welding heat. Need to cut out the welded woodruff key. (No job is complete without an angle grinder at my house)
The other thing that shits me is at over $500 I can do a better job. And I'm not even a mechanic Im a weak nerdy Asian.
I won't be going back to allmaz...
So my goal is to new crank pully new woodruff key and new boss hub oh and new crank bolt. The welds were too brittle and the boss hub spins freely on the crank nose. I was tempted to put it all back together with just a new belt...
Will probably go down the loctite 660 road. At 300,000 I guess the engine has had a good life, a new engine will be my summer project. I'm happy if my fix lasts untill the end of the year.
What shits me is I need to replace that oil-seal at the front, it's leaking quite badly probably damaged from welding heat. Need to cut out the welded woodruff key. (No job is complete without an angle grinder at my house)
The other thing that shits me is at over $500 I can do a better job. And I'm not even a mechanic Im a weak nerdy Asian.
I won't be going back to allmaz...
every ounce counts
-
- Fast Driver
- Posts: 115
- Joined: Tue Jan 14, 2014 10:34 pm
- Vehicle: NB SE
- Location: Melbourne, VIC
- Contact:
Re: Allmaz Thankyou for your spotless welds!
That's terrible news, wun... Have you considered sending them a reciprocating tax invoice for "providing vehicle to train allmaz monkeys"
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- smy0003
- Racing Driver
- Posts: 1870
- Joined: Mon Dec 30, 2013 12:35 pm
- Vehicle: NA8
- Location: Melbourne
Re: Allmaz Thankyou for your spotless welds!
Any follow up to this, Wun?
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8
Now: Chaste White NA8
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 48 guests