I.L. Motorsport Oil cooler / Fan set installation
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
tomli123001
- Forum sponsor
- Posts: 385
- Joined: Wed May 08, 2013 11:18 pm
- Vehicle: NB SP
- Location: Brisbane
- Contact:
I.L. Motorsport Oil cooler / Fan set installation
Came across this today. Seems really impressive and alternative to oil cooler install location instead of steering column/behind fog light.
NA6-Rolled off Mt Nebo
NB SE-Sold for investment property deposit, then crashed by the buyer months later
Now Black NB SP #31.
NB SE-Sold for investment property deposit, then crashed by the buyer months later
Now Black NB SP #31.
-
Apu
- Speed Racer
- Posts: 2399
- Joined: Tue Apr 12, 2011 3:04 pm
- Vehicle: NB8B
- Location: North West, NSW
Re: I.L. Motorsport Oil cooler / Fan set installation
Only if your car doesn't have aircon?
-
tomli123001
- Forum sponsor
- Posts: 385
- Joined: Wed May 08, 2013 11:18 pm
- Vehicle: NB SP
- Location: Brisbane
- Contact:
Re: I.L. Motorsport Oil cooler / Fan set installation
Apu wrote:Only if your car doesn't have aircon?
I guess most race cars do not have air con.
By the way, can air cond work without 2nd fan? My new Fiesta ST only has 1 fan behind the radiator and of course being a new car, it has AC running very well.
NA6-Rolled off Mt Nebo
NB SE-Sold for investment property deposit, then crashed by the buyer months later
Now Black NB SP #31.
NB SE-Sold for investment property deposit, then crashed by the buyer months later
Now Black NB SP #31.
-
greenMachine
- Forum Guru
- Posts: 4053
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB SE
- Location: Sports car paradise - Canberra
- Contact:
Re: I.L. Motorsport Oil cooler / Fan set installation
Hard to tell from that, but it looks like half the radiator is seriously/moderately obstructed by that panel and the oil cooler. Not good.
Feeding the oil cooler hot air is going to hurt heat rejection from the oil. Not good.
Oil cooler with a direct feed of cold (ambient) air may be a bit old-fashioned, but it seems like a good plan to me. There are some great installations using the nosecone and wheel well if you look around.
Feeding the oil cooler hot air is going to hurt heat rejection from the oil. Not good.
Oil cooler with a direct feed of cold (ambient) air may be a bit old-fashioned, but it seems like a good plan to me. There are some great installations using the nosecone and wheel well if you look around.
I never met a horsepower I didn't like (thanks bwob)
Build thread
NB SE - gone to the dark side (and loving it
)
Build thread
NB SE - gone to the dark side (and loving it
)Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 41 guests
