Richard's NC3

Chat to do with your MX5/Miata/Eunos Garage Ride(s).

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

richardnau
Driver
Posts: 34
Joined: Mon Apr 11, 2016 9:45 am
Vehicle: NC

Richard's NC3

Postby richardnau » Thu May 26, 2016 9:04 pm

Hello all,

Well, my mid-life crisis has arrived - and what better way to celebrate it than with an MX5.

My eldest daughter is getting married on election day (she loves that the papers are counting down to her wedding day), and so the need for a family car diminishes. My wife's Corolla can fill that role.

I spent some time reading the forum and watching CarSales before I found a candidate: a 2013 NC with just under 20,000km on the clock. It's a Sports (?) model, with BBS wheels and Recaro seats. I flew up to Brisbane to complete the purchase and drove back to Sydney.

I won't say that I got a GREAT deal - I probably paid a fair price for a car in basically good condition, but with some superficial issues caused by lack of owner care and attention (scratches, scrapes, etc.). I've spend the last few weeks getting to know the car and (after some initial buyer's remorse) to love it.

I have a list of projects to complete, and parts are winging in from around the world. Maybe some will be interested in the progress of a few of these.

COMPLETED:

* fix gutter rash on all four wheels


THE LIST:

* fix two scratches on windscreen
* repair damaged front bar and repaint
* magic Motorcraft transmission fluid
* get a good polish to see how many of the scratches can be eliminated
* attend to other scratches (and a dent) according to economic sensibility
* repair some abrasion on driver's seat
* remove factory head unit and replace with something that includes navigation, working Bluetooth, etc.
* new tyres
* tyre pressure monitoring system (to use the display on the new head unit)
* TapTurn indicator relay (three blinks with a short tap)
* SmartTop (allows PRHT to be raised/lowered at low speed)
* RX8 variable intermittent wiper stalk
* upgraded headlamp bulbs (more efficient halogens - not some ricey HID kit)
* DRLs
* Nautilus horn
* and, maybe one day (I need to save up and to hear an example), a complete Goodwin exhaust setup (header/Helmholtz mid pipe, muffler).

I'll try to remember to post a few pics and write a few notes on each of these. Should be fun.

Richard.
NC3, partial Bosectomy, MeisterR ZetaCRD suspension, SmartTop, TapTurn, complete GWR exhaust (MAX Power header, Helmholtz mid-pipe, SuperQ muffler)

User avatar
smy0003
Racing Driver
Posts: 1870
Joined: Mon Dec 30, 2013 12:35 pm
Vehicle: NA8
Location: Melbourne

Re: Richard's NC3

Postby smy0003 » Thu May 26, 2016 9:08 pm

Pictures!
The BBS wheels and recaros are definitely worth seeking out one of those models.

Sent from my LG-H815 using Tapatalk
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8

richardnau
Driver
Posts: 34
Joined: Mon Apr 11, 2016 9:45 am
Vehicle: NC

Re: Richard's NC3

Postby richardnau » Thu May 26, 2016 10:32 pm

So the women of the house were all out tonight buying stuff for the Kitchen Tea.

I followed these instructions (adjusting for RHD): http://forum.miata.net/vb/showthread.php?t=416777&page=2...

... and did this:

Image

15 minutes. It works.
NC3, partial Bosectomy, MeisterR ZetaCRD suspension, SmartTop, TapTurn, complete GWR exhaust (MAX Power header, Helmholtz mid-pipe, SuperQ muffler)

joshuam
Fast Driver
Posts: 241
Joined: Sat Mar 21, 2015 11:24 pm
Vehicle: NB8B
Location: Brisbane (southside), QLD

Re: Richard's NC3

Postby joshuam » Thu May 26, 2016 11:13 pm

Getting into some mods already! :)

We do want pics though! :P
'00 Midnight Blue NB8B - 4.1 Torsen 2 | Tein Flex-Z | Enkei RP01 :)
Garage Thread: Here

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Re: Richard's NC3

Postby JBT » Fri May 27, 2016 6:07 am

I've just fitted a Good-win super Q muffler to otherwise standard drive train - you'll love it. :mrgreen:
Image

richardnau
Driver
Posts: 34
Joined: Mon Apr 11, 2016 9:45 am
Vehicle: NC

Re: Richard's NC3

Postby richardnau » Mon Jun 13, 2016 1:44 pm

OK, some updates.

Been busy with a few things, and here's the state of the list:

COMPLETED:

* fix gutter rash on all four wheels (done by a wheel repair company)
* fix two scratches on windscreen (bought a small kit from a company called Glass Polish)
* new tyres (Michelin PS3 215/45R17 - very nice)
* TapTurn indicator relay (three blinks with a short tap)
* SmartTop (allows PRHT to be raised/lowered at low speed)
* RX8 variable intermittent wiper stalk

THE LIST:

* repair damaged front bar and repaint
* magic Motorcraft transmission fluid
* get a good polish to see how many of the scratches can be eliminated
* attend to other scratches (and a dent) according to economic sensibility
* repair some abrasion on driver's seat
* remove factory head unit and replace with something that includes navigation, working Bluetooth, etc.
* tyre pressure monitoring system (to use the display on the new head unit)
* upgraded headlamp bulbs (more efficient halogens - not some ricey HID kit)
* DRLs
* Nautilus horn
* and, maybe one day (I need to save up and to hear an example), a complete Goodwin exhaust setup (header/Helmholtz mid pipe, muffler).


TAPTURN

Haven't seen much discussion of this item here. It's a cheap and easy mod.

The device is a revised indicator relay. Looks like this:

Image

To install, you just unplug the existing indicator relay (behind the dash, just above the bonnet and boot releases), and plug this in. There's also a single wire to run across to the fuse box near the passenger's feet.

The device provides:

* three flashes (you can change the setting) with a tap on the indicator stalk (I really missed this from other cars)
* 'wig wag' hazard lights while engine running (only really for display use)
* 'coming home' illumination (using indicators)
* one side indicators on when parked (as clearance light - the Euro cars do this with one brake light and one parking light).

Available here: http://www.autowindow.com/. The guy is very friendly. Ask for a long wire for Australian installation (in USA, the fuse box is very close to the relay).


SMARTTOP

I think most people know what this is by now: a device that defeats the 'you must be stationary with handbrake on' rule for opening and closing the PRHT. It looks like this:

Image

and is a bit expensive. But it's really nice to close the PRHT as I drive into my parking space at work. Lots of feedback and installation hints on the USA forums about this. Manufacturer's site is here: http://www.modsforcars.com. I bought from a crowd called Bumper Plugs.


OTHER

While messing around with things electrical, I now have an all LED back end.

Indicators:

Image

Brake/tail lights:

Image

Reverse:

Image

They all offer a (small) improvement over standard without sacrificing visibility.


NEXT

Car goes in for front bumper repair tomorrow, and if a cable arrives for the radio soon, maybe that will be the next thing. Watch this space.

(And yes, photos soon...)
NC3, partial Bosectomy, MeisterR ZetaCRD suspension, SmartTop, TapTurn, complete GWR exhaust (MAX Power header, Helmholtz mid-pipe, SuperQ muffler)

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Re: Richard's NC3

Postby Regie » Mon Jun 13, 2016 1:47 pm

I've been looking at those replacement flashers on the big forum.

I see you are now running LED indicator bulbs, does the flasher eliminate the need to run resistors on the LED's themselves to shop the fast blink?
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

richardnau
Driver
Posts: 34
Joined: Mon Apr 11, 2016 9:45 am
Vehicle: NC

Re: Richard's NC3

Postby richardnau » Mon Jun 13, 2016 2:02 pm

Yes, the TapTurn works fine with all incandescent, all LED or any combination. Flash frequency is done with electronics and doesn't require precise load on the circuit.
NC3, partial Bosectomy, MeisterR ZetaCRD suspension, SmartTop, TapTurn, complete GWR exhaust (MAX Power header, Helmholtz mid-pipe, SuperQ muffler)

cookie
Fast Driver
Posts: 471
Joined: Thu Dec 19, 2013 10:36 pm
Vehicle: NA6

Re: Richard's NC3

Postby cookie » Mon Jun 13, 2016 7:06 pm

Wonder if this would work on an NA....

Sent from my SM-G920I using Tapatalk

richardnau
Driver
Posts: 34
Joined: Mon Apr 11, 2016 9:45 am
Vehicle: NC

Re: Richard's NC3

Postby richardnau » Mon Jun 13, 2016 10:07 pm

cookie wrote:Wonder if this would work on an NA....

Sent from my SM-G920I using Tapatalk


Manufacturer's info:

Image
NC3, partial Bosectomy, MeisterR ZetaCRD suspension, SmartTop, TapTurn, complete GWR exhaust (MAX Power header, Helmholtz mid-pipe, SuperQ muffler)

richardnau
Driver
Posts: 34
Joined: Mon Apr 11, 2016 9:45 am
Vehicle: NC

Re: Richard's NC3

Postby richardnau » Mon Jun 13, 2016 10:11 pm

A curious diversion...

While cleaning up and working on the car I have found a few things under seats and carpet:

Previous owner's credit card (no, I have not and will not use it!):

Image

Fuzzy spectacles case (the case is fuzzy, no idea as to the quality of the specs formerly contained therein):

Image

But this one really has me puzzled:

Image

Former owner was definitely NOT a dentist!
NC3, partial Bosectomy, MeisterR ZetaCRD suspension, SmartTop, TapTurn, complete GWR exhaust (MAX Power header, Helmholtz mid-pipe, SuperQ muffler)

User avatar
Rob
Fast Driver
Posts: 286
Joined: Mon Jun 16, 2003 11:00 am
Vehicle: NC
Location: Sydney

Re: Richard's NC3

Postby Rob » Thu Aug 18, 2016 5:21 pm

Here's a wild thought on the dental pick... he collects ancient coins.

When I was into the hobby some years back, dental picks (and similar), were one part of the arsenal of cleaning up old coins in certain circumstances.

Image

Congrats on the purchase, too :NC:
2007 Copper Red - Current ride | MX-5 Club of NSW #2999
1992 Classic Red - Sold Jan 2007 | Former MX-5 Club of NSW #905

richardnau
Driver
Posts: 34
Joined: Mon Apr 11, 2016 9:45 am
Vehicle: NC

Re: Richard's NC3

Postby richardnau » Sat Nov 05, 2016 7:39 pm

Been a while. Time for an update.

COMPLETED:

* fix gutter rash on all four wheels (done by a wheel repair company) (today I figured out the best tool for cleaning these puppies - finger wrapped in microfibre...)
* fix two scratches on windscreen (bought a small kit from a company called Glass Polish)
* new tyres (Michelin PS3 215/45R17 - very nice)
* TapTurn indicator relay (three blinks with a short tap)
* SmartTop (allows PRHT to be raised/lowered at low speed)
* RX8 variable intermittent wiper stalk
* repair damaged front bar and repaint
* repair some abrasion on driver's seat
* remove factory head unit and replace with something that includes navigation, working Bluetooth, etc.
* tyre pressure monitoring system (to use the display on the new head unit)
* upgraded headlamp bulbs (more efficient halogens - not some ricey HID kit)
* installed MeisterR CRD coilovers (this was the biggest mechanical project I've ever undertaken - and may retain that crown... I learned a lot, but it was a long, slow job)
* rather than fixing scratched mirrors, I added some Guardian Designs carbon fibre mirror caps - I think they look nice.

THE TO DO LIST:

* magic Motorcraft transmission fluid
* get a good polish to see how many of the scratches can be eliminated
* attend to other scratches (and a dent) according to economic sensibility
* DRLs
* Nautilus horn.


It's going for a service and a few other things on Thu/Fri next week:

* Motorcraft trannie fluid (obtained on Amazon!)
* full service
* fix a few little things
* full Goodwin exhaust.

I've been asked for pix. Here are a few. Proof that it's all real.

Image

Image

Image

Image

Image
NC3, partial Bosectomy, MeisterR ZetaCRD suspension, SmartTop, TapTurn, complete GWR exhaust (MAX Power header, Helmholtz mid-pipe, SuperQ muffler)

User avatar
smy0003
Racing Driver
Posts: 1870
Joined: Mon Dec 30, 2013 12:35 pm
Vehicle: NA8
Location: Melbourne

Re: Richard's NC3

Postby smy0003 » Sat Nov 05, 2016 11:59 pm

Very practical mods.
Car is looking schmick!

Sent from my LG-H815 using Tapatalk
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8


Return to “MX5 Garage Chat”

Who is online

Users browsing this forum: No registered users and 176 guests