Hi,
I was changing the battery today
The previous owner used a cheap battery with small terminals, so the connectors had metal collets
I push out a metal collet and it went into the radiator area somewhere ???
Where could it have gone?
Whats the easiest way to check where it might have gone?
I can push the radiator fan it seems to spin freely, the air con fan also spins with no noise
Dropped a metal collet onto the radiator
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- chrisb
- Driver
- Posts: 35
- Joined: Sat Mar 12, 2016 9:11 am
- Vehicle: NC
- Location: Melbourne
- chrisb
- Driver
- Posts: 35
- Joined: Sat Mar 12, 2016 9:11 am
- Vehicle: NC
- Location: Melbourne
Re: Dropped a metal collet onto the radiator
Well that was easy...
1. Jack the car up
2. Get underneath and look through the gap of the bottom plastic guard
3. Look for it between the radiator and the shroud
4. Move it to the center
5. Pry apart the plastic shroud
6. Collet falls out
7. Drive car
All done
1. Jack the car up
2. Get underneath and look through the gap of the bottom plastic guard
3. Look for it between the radiator and the shroud
4. Move it to the center
5. Pry apart the plastic shroud
6. Collet falls out
7. Drive car
All done
-
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: Dropped a metal collet onto the radiator
Reach under the car and bang the plastic splash tray a few times. 9 out of 10 times something will fall out.
- chrisb
- Driver
- Posts: 35
- Joined: Sat Mar 12, 2016 9:11 am
- Vehicle: NC
- Location: Melbourne
Re: Dropped a metal collet onto the radiator
This was the 1 of 10 times, it was between the radiator and fan shroud
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Dropped a metal collet onto the radiator
I usually just look and see if it's blocking a belt or fan.
If not I ignore it and let it find it's own way out
If not I ignore it and let it find it's own way out
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 59 guests