Hi all, I broke my aftermarket air intake temperature sensor and can't remember what one I used!!!!
It was one with known graph curve for entering into an adaptronic ecu.
it had a plastic/ceramic grid to protect the sensor the numbers and letters stamped on it are - ACR - 12V - 3
and also has 1801 stamped on it.
It also has a 2 pin plug
Broken Air intake temp sensor
Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean
- Jaxom_2
- Fast Driver
- Posts: 131
- Joined: Sat Dec 24, 2005 8:25 pm
- Vehicle: NB8B - Turbo
- Location: Adelaide, South Australia
- Contact:
Broken Air intake temp sensor
2002 with a Kraftwerks C30-74 Rotrex Kit zooom frick'n zooom
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Broken Air intake temp sensor
Probably General Motors/ GM AIT sensor.
- smy0003
- Racing Driver
- Posts: 1870
- Joined: Mon Dec 30, 2013 12:35 pm
- Vehicle: NA8
- Location: Melbourne
Re: Broken Air intake temp sensor
Yep, Adaptronic gives the values for the GM open element sensors on the forum.
Sent from my LG-H815 using Tapatalk
Sent from my LG-H815 using Tapatalk
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8
Now: Chaste White NA8
- Jaxom_2
- Fast Driver
- Posts: 131
- Joined: Sat Dec 24, 2005 8:25 pm
- Vehicle: NB8B - Turbo
- Location: Adelaide, South Australia
- Contact:
Re: Broken Air intake temp sensor
Thanks for that, Adaptronic also sell the sensors.
I remembered the company in the US i purchased the original from - DIY AUTOTUNE,
Same info as Adaptronic.
Thanks again, just bought the sensor from Adaptronic
I remembered the company in the US i purchased the original from - DIY AUTOTUNE,
Same info as Adaptronic.
Thanks again, just bought the sensor from Adaptronic
2002 with a Kraftwerks C30-74 Rotrex Kit zooom frick'n zooom
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: No registered users and 87 guests