What to use to rejuvinate 10 year old cutting compound?

davekmoore · Postby **davekmoore** » Thu Jan 07, 2016 9:22 pm

Well the Australian climate finally killed my 10 year old T Cut. Or, at least, made it turn into jelly.

So what can I use to turn it back into something more liquid?

No comments needed about just buying a new bottle thanks. I could work that one out myself.

SE · Postby SE » Thu Jan 07, 2016 9:37 pm

Buy some new T Cut

ralt · Postby **ralt** » Thu Jan 07, 2016 10:28 pm

Hi.
Put water into the container and give it a good stir.

davekmoore · Postby **davekmoore** » Thu Jan 07, 2016 10:42 pm

Thank you ralt.

Sailor · Postby **Sailor** » Fri Jan 08, 2016 1:03 pm

Did a Meguiars tech night and they used this on my car
http://www.meguiars.com.au/dual-action- ... on-system/

The results were quite amazing.
You might have to buy direct as apparently it's not available in outlets
Reggie, Guy, Gary N and others have used it ans swear by it!

SE · Postby SE » Fri Jan 08, 2016 1:15 pm

Meguiars

Your paying 90% for the name and 10% for the product lots of better stuff around

bruce · Postby **bruce** » Fri Jan 08, 2016 3:45 pm

I would bin it. It might scratch up your paint rather than making it look better.

pezchops · Postby **pezchops** » Fri Jan 08, 2016 5:12 pm

metho ...thats what i used before, and it also works for silver polish etcetc
it dries out again but ok for the time you mix it.
i take no responsibility for any damage to rubbers or paint

Sailor · Postby **Sailor** » Fri Jan 08, 2016 10:33 pm

SE wrote:Meguiars Your paying 90% for the name and 10% for the product lots of better stuff around

Until you try it......

Regie · Postby **Regie** » Sat Jan 09, 2016 8:03 am

SE wrote:Meguiars Your paying 90% for the name and 10% for the product lots of better stuff around

No there isn't. I've tried a lot of different products. This stuff rips them all to shreads

billybunter · Postby **billybunter** » Sun Apr 10, 2016 8:23 pm

see if you can get onto some FARECLA G3 regular cutting compound. not cheap but produces the goods. this effort today on cutting and buffing the top clear coat

SE · Postby SE » Sun Apr 10, 2016 9:08 pm

Regie wrote:
SE wrote:Meguiars Your paying 90% for the name and 10% for the product lots of better stuff around

No there isn't. I've tried a lot of different products. This stuff rips them all to shreads

Been using Collinite on the boat and cars for many years
Polished the MX today and used there leather wax on the seats remarkable !
http://www.collinite.com/automotive-wax/ you will never look back :wink:

zero00 · Postby **zero00** » Sun Apr 10, 2016 9:54 pm

SE wrote:Meguiars Your paying 90% for the name and 10% for the product lots of better stuff around

Your opinion - Meguiars is the best product around - just read the instructions

I've used it for over 20 years and it keeps my cars magnificent regardless of what colour the car is, two of which brought better than double Red Book price when I sold each of them at 9yo and both were red

BTW the 'instructions' are what most would call 'the small print' on the reverse side

SE · Postby SE » Sun Apr 10, 2016 10:07 pm

zero00 wrote:
SE wrote:Meguiars Your paying 90% for the name and 10% for the product lots of better stuff around

Your opinion - Meguiars is the best product around - just read the instructions

I've used it for over 20 years and it keeps my cars magnificent regardless of what colour the car is, two of which brought better than double Red Book price when I sold each of them at 9yo and both were red

BTW the 'instructions' are what most would call 'the small print' on the reverse side

I have used Meguiars and compared it to Collinite have you or are u talking out you bum again ?
So you got double the price for a red car just because you polished it with Meguiars
:roll:

God your funny