Car not starting after engine swap
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
Rolley
- Racing Driver
- Posts: 564
- Joined: Fri Nov 15, 2013 6:59 am
- Vehicle: NA6
- Location: Brisbane
Re: Car not starting after engine swap
Before you go digging too deeply try jump starting it with another car/battery. There may be enough juice to power the lights and accessories just not enough to turn her over.
-
cookie
- Fast Driver
- Posts: 471
- Joined: Thu Dec 19, 2013 10:36 pm
- Vehicle: NA6
Re: Car not starting after engine swap
If you're missing the earth straps you will have issues like this. Check the one near heater hoses/extractors. No negative = no return path for the starter motor. Clicking is the main relay for starter.
-
manga_blue
- Forum Guru
- Posts: 4897
- Joined: Mon Apr 24, 2006 7:27 pm
- Vehicle: NA8
- Location: Moruya, NSW
Re: Car not starting after engine swap
Also if you took the gearbox and ppf out then check you reconnected and tightened the earth strap near the back of the ppf.
’95 NA8
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 121 guests
