Evans waterless engine coolant

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
davekmoore
Speed Racer
Posts: 4681
Joined: Thu Apr 30, 2009 1:53 am
Vehicle: NC
Location: Esprick, UK

Evans waterless engine coolant

Postby davekmoore » Mon Dec 28, 2015 7:01 pm

So if it's so good, how come we don't all use it?
http://www.evanscoolants.com.au/
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)

cookie
Fast Driver
Posts: 471
Joined: Thu Dec 19, 2013 10:36 pm
Vehicle: NA6

Re: Evans waterless engine coolant

Postby cookie » Mon Dec 28, 2015 7:04 pm

I'm 90% to trying it. The cost is stupid but what appeals is the zero pressure aspect. I'd rather get a small weep than a burst hose.

Cons are.
Cost
30% worse cooling than water
Flammable if it gets superheated.

StillIC
Racing Driver
Posts: 862
Joined: Sat Jan 01, 2011 2:30 pm
Vehicle: NA6
Location: Newcastle

Re: Evans waterless engine coolant

Postby StillIC » Mon Dec 28, 2015 7:54 pm

davekmoore wrote:So if it's so good, how come we don't all use it?

Because so many of us still have water based coolants in our engines which are working quite well. But in time the numbers will increase. A mate of mine is a dealer and he is hooked on it, especially the low pressure aspect. But when I spoke to him most recently he hadn't converted all (roughly 10) of his cars to it. Ultimately the benefits have to outweigh the cost of the product + the cost of effort to change the fluid. This will be made easier if the fluid is due to be changed, or will be drained for some other reason.
Last edited by StillIC on Mon Dec 28, 2015 7:56 pm, edited 1 time in total.
WP:1.12.492 SMPN:1.16.403 SMPS:1.05.473 SMPGP:1.53.256 SMPB:2.22.181

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: Evans waterless engine coolant

Postby project.r.racing » Mon Dec 28, 2015 7:55 pm

The way I see it. Water + coolant option works fine, and it a hell of a lot cheaper.

Ice88
Fast Driver
Posts: 149
Joined: Mon Jan 05, 2015 10:31 am
Vehicle: ND - 2 GT

Re: Evans waterless engine coolant

Postby Ice88 » Mon Dec 28, 2015 10:00 pm

project.r.racing wrote:The way I see it. Water + coolant option works fine, and it a hell of a lot cheaper.


^^ this.

User avatar
davekmoore
Speed Racer
Posts: 4681
Joined: Thu Apr 30, 2009 1:53 am
Vehicle: NC
Location: Esprick, UK

Re: Evans waterless engine coolant

Postby davekmoore » Tue Dec 29, 2015 7:26 am

So if it's so good, how come those of us who have had overheating issues don't all use it?
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: Evans waterless engine coolant

Postby project.r.racing » Tue Dec 29, 2015 8:52 am

davekmoore wrote:So if it's so good, how come those of us who have had overheating issues don't all use it?
Cos the overheating wasn't caused by the much cheaper water + coolant. The overheating was mechanical, not chemical. The same overheating will apply when using said product.

User avatar
zossy1
Racing Driver
Posts: 1979
Joined: Wed Aug 18, 2010 8:48 am
Vehicle: NA8
Location: Southern Highlands, NSW
Contact:

Re: Evans waterless engine coolant

Postby zossy1 » Tue Dec 29, 2015 10:06 am

It's potentially great stuff. But the cost makes it uneconomical.

For an MX5, you could almost buy a reroute kit for the same price as a single fill of this stuff.

User avatar
bruce
Speed Racer
Posts: 7707
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: Evans waterless engine coolant

Postby bruce » Tue Dec 29, 2015 4:49 pm

The actual cost (per 5 litre)?
Plus you're gonna have to get all the old coolant forced out of the engine.

User avatar
zossy1
Racing Driver
Posts: 1979
Joined: Wed Aug 18, 2010 8:48 am
Vehicle: NA8
Location: Southern Highlands, NSW
Contact:

Re: Evans waterless engine coolant

Postby zossy1 » Tue Dec 29, 2015 9:19 pm

A guy I run sprints with uses it in his Cossie-powered Escort. I think he indicated that the flush plus the coolant would run me around $200, but that it has a very long lifespan and can be reused.

I have not independently priced it though so this may be off the mark.

cookie
Fast Driver
Posts: 471
Joined: Thu Dec 19, 2013 10:36 pm
Vehicle: NA6

Re: Evans waterless engine coolant

Postby cookie » Wed Dec 30, 2015 12:45 am

zossy1 wrote:A guy I run sprints with uses it in his Cossie-powered Escort. I think he indicated that the flush plus the coolant would run me around $200, but that it has a very long lifespan and can be reused.

I have not independently priced it though so this may be off the mark.


$200 is pretty close to the mark. Not cheap!

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: Evans waterless engine coolant

Postby hks_kansei » Mon Jan 04, 2016 9:27 am

davekmoore wrote:So if it's so good, how come those of us who have had overheating issues don't all use it?



Because overheating is an issue regardless of the boiling point of the liquid used to transfer heat, and if an engine is having overheating issues it is usually because of an issue unrelated to coolant. (radiator not efficient, blockages, thermostat, etc, etc)

water boils at 100deg, this stuff boils at 190 per the site.
Past 100deg you're already likely to have done damage, so why does it really matter if the coolant can reach 190 degrees?
Would be king of like having fingerless oven mitts. The mitt can happily handle the oven heat, but it's not really any use if your fingers are burnt.


As far as the ability of the liquid to absorb heat, frankly I think that a cooling system should be always designed with enough headroom to be able to keep the engine cool even if it's using cheap arsed coolant with the mixture wrong.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

Danny
Fast Driver
Posts: 222
Joined: Mon Feb 17, 2014 8:13 pm
Vehicle: NB SE

Re: Evans waterless engine coolant

Postby Danny » Tue Jan 05, 2016 11:37 am

Much cheaper, proven and less "snake oil" sales pitch.

http://www.penriteoil.com.au/products.p ... roducts=98

User avatar
zossy1
Racing Driver
Posts: 1979
Joined: Wed Aug 18, 2010 8:48 am
Vehicle: NA8
Location: Southern Highlands, NSW
Contact:

Re: Evans waterless engine coolant

Postby zossy1 » Tue Jan 05, 2016 8:18 pm

That stuff is basically the same as Redline Water Wetter and Nulon Ultra Cool - both of which have been around for years.


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 118 guests