Matt's Betty, NA8C

Chat to do with your MX5/Miata/Eunos Garage Ride(s).

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

MJT_MX5
Fast Driver
Posts: 313
Joined: Tue Feb 04, 2014 11:41 pm
Vehicle: NA8
Location: NSW

Matt's Betty, NA8C

Postby MJT_MX5 » Tue Sep 08, 2015 8:31 pm

The newest member of the fleet.
Betty!
Image
Pic from the drive home today.
First drive home from work had to include a National Park run .
influence for the name: Spiderbait ' Black Betty '
https://www.youtube.com/watch?v=nU1VfYYKMDk

Had a week off work, meaning to get all those little projects you never quite get round to doing done!.
And what did i do, Bought another car, whoops.

Went for the 1100km (return) drive to look at the car last monday, Decided on a good price and put down the deposit.
Just picked it up this weekend,
1996 Aussie NA8C
128'000k's on the clock.
Full service history, well looked after.
lived in Melbourne before 2009, if anyone knows the car.

So far i've put my parts from Whitey on her.
* Hardtop, as the window on the softop is falling out, Included in the sale was a Brand New Robbins Softop! :)
* Watanabes 15's
* Zoom retro fuel lid
* OEM front lip

To do list:
* Clean & Polish
* Get to the Track!
* Install my Brown Davis Rollbar
* Exhaust
* Suspension

Any opinions on the Mis- Matched hardtop?
In two minds about painting it black.
I actually quite like the white on black.

MJT_MX5
Fast Driver
Posts: 313
Joined: Tue Feb 04, 2014 11:41 pm
Vehicle: NA8
Location: NSW

Re: Matt's Betty, NA8C

Postby MJT_MX5 » Mon Nov 02, 2015 6:45 pm

Update:
2 weeks into ownership i was rear ended on my way home from work.
Only minor damage, boot lid,bumper, and beaver panel.

It's now in the shop getting repaired, when they said they'd try and give me a equivalent replacement vehicle ND ND ND!!! is all i could think.
Nope, a gutless Kia, does the job, but i'll be happy to hand the keys back.



Installed:
Exterior:
* Hardtop
* Watanabes 15x6.5 +45
* Zoom retro fuel lid
* OEM front lip
* Jet stream turn signal Tsi, Parker light relocated behind the mesh.
* Red bear Tow hooks ( front & Rear )

Interior:
* Vent Rings
* Red leather shift boot & Handbrake cover
* Automotive plus single hoop/ single diagonal tall boy roll bar
* Nardi 350mm
* Nb SE seats, black/ red insert

Engine Bay:
* New radiator

Some pics from before the accident:
Image
Image
Image
Image
Bear tow Hooks!
Image

joshuam
Fast Driver
Posts: 241
Joined: Sat Mar 21, 2015 11:24 pm
Vehicle: NB8B
Location: Brisbane (southside), QLD

Re: Matt's Betty, NA8C

Postby joshuam » Mon Nov 02, 2015 7:32 pm

Very nice - I like how the subtle red accents on the outside (tow hooks, center caps) all tie in with the interior. A lot of fancy new parts in general too :P

I was run into back in July and they are finally redoing the job properly at the end of the month. Really annoyed because this has been my final semester of uni, so not much time to enjoy the car.... then as soon as exams are done I can't drive for 1-2 weeks because of an operation and then immediately after that I have to hand my keys in for a week for the repairs and deal with a similarly useless hire car :P (Then I leave the country for 2 months a week after that.... so yeah, poor unloved MX5 :P) All I can say is hopefully they do the job properly for you!

As for mismatched hard top..... its not bad.... but I don't think it ties in with the rest of the style as well as it could. Maybe think of something inventive instead of just black and give it a go? :P
'00 Midnight Blue NB8B - 4.1 Torsen 2 | Tein Flex-Z | Enkei RP01 :)
Garage Thread: Here

Roadster2
Fast Driver
Posts: 272
Joined: Thu Jul 10, 2014 10:30 am
Vehicle: NA8
Location: Sydney

Re: Matt's Betty, NA8C

Postby Roadster2 » Tue Nov 03, 2015 8:10 pm

joshuam wrote:As for mismatched hard top..... its not bad.... but I don't think it ties in with the rest of the style as well as it could. Maybe think of something inventive instead of just black and give it a go? :P


Agreed regarding the hardtop. I do think black on black would look more neat. Not sure what other colours out there, perhaps some browsing on the net might find something quite nice. A hardtop spoiler may give off a more aggressive look which might be what you're looking for perhaps ?

By the way, whens that shiny part you got off me going in the car ;D ?

User avatar
MXO005
Fast Driver
Posts: 163
Joined: Sat Aug 22, 2015 12:51 pm
Vehicle: NA8
Location: Brisbane (West)

Re: Matt's Betty, NA8C

Postby MXO005 » Tue Nov 03, 2015 8:23 pm

I like it too.

Those TSI's really work on a black car. Best outcome I've seen yet.

Not sure about the white hardtop.
First thoughts were slap some "To protect and to serve" stickers on the doors or wings.
Or "To punish and enslave" if that's your preference. :D
Ian
Silver '94 Eunos Roadster - Nothing much to report.... yet!

MJT_MX5
Fast Driver
Posts: 313
Joined: Tue Feb 04, 2014 11:41 pm
Vehicle: NA8
Location: NSW

Re: Matt's Betty, NA8C

Postby MJT_MX5 » Wed Nov 04, 2015 9:40 pm

The Shiny part is on the LE, sounds good too!
Yeah i was thinking about getting the hardtop painted while in the shop, but the white has grown on me,
This is my muse for keeping it white.
Image

The Job will definitely be done well, its through a mate and a quality smash repair.

Roadster2
Fast Driver
Posts: 272
Joined: Thu Jul 10, 2014 10:30 am
Vehicle: NA8
Location: Sydney

Re: Matt's Betty, NA8C

Postby Roadster2 » Wed Nov 04, 2015 10:35 pm

MJT_MX5 wrote:The Shiny part is on the LE, sounds good too!


Interesting ! Did it make a difference performance wise (I never got around to fitting it on so im curious haha). I've heard it gives a deeper note, although I didn't think it could be heard with a louder sounding intake like mania's.

User avatar
KevGoat
Speed Racer
Posts: 3940
Joined: Sun Jun 17, 2012 8:48 pm
Vehicle: NB SE
Location: Down South, Adelaide, SA

Re: Matt's Betty, NA8C

Postby KevGoat » Wed Nov 04, 2015 10:57 pm

From first looking at the exterior, I really like the white over black. But then the later shots with the red interior accents, the white hard top looks out of place, a distraction. Personally, I'd go all black exterior, maybe with some mild chrome accents to break it up. and allow the interior to really stand out, but that's just my thoughts. Looks great anyway!

joshuam
Fast Driver
Posts: 241
Joined: Sat Mar 21, 2015 11:24 pm
Vehicle: NB8B
Location: Brisbane (southside), QLD

Re: Matt's Betty, NA8C

Postby joshuam » Sun Nov 29, 2015 2:07 am

Just popped up in my news feed..... only a few similarities!!!! :O

Image
'00 Midnight Blue NB8B - 4.1 Torsen 2 | Tein Flex-Z | Enkei RP01 :)
Garage Thread: Here

MJT_MX5
Fast Driver
Posts: 313
Joined: Tue Feb 04, 2014 11:41 pm
Vehicle: NA8
Location: NSW

Re: Matt's Betty, NA8C

Postby MJT_MX5 » Sat Jan 09, 2016 10:52 pm

New Shoes!
Had these sitting in the garage for awhile, Needed a really good clean before going on the car.
I think there was years of brake dust built up on them, so filthy.
Spec's are SSR reverse Mesh 14x7 +22
Image

Leon_
Driver
Posts: 41
Joined: Mon Apr 20, 2015 10:22 am
Vehicle: NA8
Location: Western Sydney

Re: Matt's Betty, NA8C

Postby Leon_ » Sun Jan 10, 2016 7:57 am

nice wheel, suspension next?

MJT_MX5
Fast Driver
Posts: 313
Joined: Tue Feb 04, 2014 11:41 pm
Vehicle: NA8
Location: NSW

Re: Matt's Betty, NA8C

Postby MJT_MX5 » Tue Jan 19, 2016 12:07 am

yeah suspension might be down the track,
got a little bit of work done on the weekend.
Finally got a new/old soft top for it.
I pulled the old one out when i bought the car as it was useless with the window falling out, and have just been running the hardtop.
NB Softop came up for sale, so she finally got a new roof.
Image
So happy when i pulled the carpet up it looked like this, Absolutely No Rust!
Image
New roof in, didn't take much more than 1hr.
Image

MJT_MX5
Fast Driver
Posts: 313
Joined: Tue Feb 04, 2014 11:41 pm
Vehicle: NA8
Location: NSW

Re: Matt's Betty, NA8C

Postby MJT_MX5 » Wed Apr 27, 2016 7:49 pm

Not too many changes,
Picked up a pair of Lotus which should be good for the upcoming regularity event with the club,
Very comfortable for a fixed back seat, and sits nice and low.
Image
Over the Long weekend i got the other one out for some overdue driving.
Pity the don't both fit in the garage.
Image
Image
Need some better photos of them together.

MJT_MX5
Fast Driver
Posts: 313
Joined: Tue Feb 04, 2014 11:41 pm
Vehicle: NA8
Location: NSW

Re: Matt's Betty, NA8C

Postby MJT_MX5 » Sun May 22, 2016 6:17 pm

First time out at Marulan earlier this month for a Regularity Event with the MX5 club.
Serviced and numbers on, ready for the day. :mrgreen:
Image
Car was flawless All-Day, unlike the driver.
My driving skills have hugely improved, and have found a new appreciation for the car.
With a stock car on street tyres i managed a respectable 54.104 sec Lap, Experienced guys in stock 1.8's are low 50's.
Don't think i put a complete lap together, i'd get a few corners right.
but still need to work on driving out of the corner, and later braking

The Whole day was great, very well run and alot of help and Advice from the experienced racers.
Anyone whose thought about getting their car on the track, Do It!
You won't be disappointed.
Few Pic's from the day.
Image
Image
Image
Image
When i was pushing at the end of the day, not sure how controlled it was :shock:
Image
Link to the full album: https://www.flickr.com/photos/138178876 ... 829575455/


Return to “MX5 Garage Chat”

Who is online

Users browsing this forum: No registered users and 193 guests