Hi,
I am seriously considering upgrading to a tune able ECU. I have never played around with this aspect of a vehicle before but will learn quickly if it is the right mod for me. Basically looking for more power and faster lap times.
What are the pro's and con's?
How much should I be budgeting for?
I really want to know what is the most popular for a NA6.
I have only a lightly modified 1600cc.
ARC induction.
RX7 AFM.
Extractors...
Hope this sparks some opinions and heaps of info.
ECU
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Learner Driver
- Posts: 21
- Joined: Sun Sep 13, 2015 6:07 pm
- Vehicle: NA6
- Location: Perth
ECU
TOPSAIL INSURANCE www.topsailinsurance.com.au
FUEL RIGHT www.fuelright.com.au
A&S MOTORSPORT www.a&smotorsport.com.au
FUEL RIGHT www.fuelright.com.au
A&S MOTORSPORT www.a&smotorsport.com.au
- bartmanftw
- Fast Driver
- Posts: 451
- Joined: Wed Oct 30, 2013 1:35 pm
- Vehicle: NA6
- Location: Victoria
Re: ECU
Programmable ECUs don't really have any cons if they're set up right. You'll get better response, better fuel economy, more power ect. On a na6 you'll get a nice power gain by removing the AFM and using a MAP sensor isntead. If you're wanting to DIY, then look into the Megasquirt ECU range. If you can solder one together you can save quite a bit of money. You'll need to factor in the cost of a wide-band O2 sensor as well as the initial ECU purchase.
-
- Learner Driver
- Posts: 21
- Joined: Sun Sep 13, 2015 6:07 pm
- Vehicle: NA6
- Location: Perth
Re: ECU
I like the sounds of making it up from scratch.
I am a novice when it comes to injection though. Can you briefly explain what a MAP does, does it entirely replace the AFM as an alternative to delivering the air and fuel?
is there an ECU kit that can be bought?
I am a novice when it comes to injection though. Can you briefly explain what a MAP does, does it entirely replace the AFM as an alternative to delivering the air and fuel?
is there an ECU kit that can be bought?
TOPSAIL INSURANCE www.topsailinsurance.com.au
FUEL RIGHT www.fuelright.com.au
A&S MOTORSPORT www.a&smotorsport.com.au
FUEL RIGHT www.fuelright.com.au
A&S MOTORSPORT www.a&smotorsport.com.au
- bartmanftw
- Fast Driver
- Posts: 451
- Joined: Wed Oct 30, 2013 1:35 pm
- Vehicle: NA6
- Location: Victoria
Re: ECU
Instead of measuring the airflow through the airflow meter the ECU calculates the required fuel using a manifold absolute pressure (MAP) sensor and a temperature sensor to determine fueling. So basically it reads the intake pressure and uses that to determine how much fuel to inject among other things.
This is a DIYPNP megasquirt kit that you assemble yourself which will work for you. It runs on a microsquirt module and uses MS2/extra firmware.
http://www.diyautotune.com/catalog/diyp ... p-384.html
This is a DIYPNP megasquirt kit that you assemble yourself which will work for you. It runs on a microsquirt module and uses MS2/extra firmware.
http://www.diyautotune.com/catalog/diyp ... p-384.html
-
- Speed Racer
- Posts: 3471
- Joined: Sun Jan 19, 2014 9:52 am
- Vehicle: NA6
- Location: Lugarno, Sydney
Re: ECU
Everything Bart said.
MS2 will suit perfectly.
My advice is to also budget for a wide band so that you can take advantage of the autotune features ;)
MS2 will suit perfectly.
My advice is to also budget for a wide band so that you can take advantage of the autotune features ;)
NA6 turbo - 140kw atw - not the most powerful but so much fun
- bartmanftw
- Fast Driver
- Posts: 451
- Joined: Wed Oct 30, 2013 1:35 pm
- Vehicle: NA6
- Location: Victoria
Re: ECU
Wideband is 110% necessary for tuning. Don't even consider trying without one.
-
- Speed Racer
- Posts: 3511
- Joined: Thu May 19, 2011 3:38 pm
- Vehicle: NA8
- Location: Brisbane
Re: ECU
The biggest disadvantage with a tuneable ECU is you'll be constantly dicking around with it sorting some little issue.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- ndragun
- Fast Driver
- Posts: 376
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: ND - 2 GT
- Location: Brisbane, QLD
- Contact:
Re: ECU
sailaholic wrote:The biggest disadvantage with a tuneable ECU is you'll be constantly dicking around with it sorting some little issue.
Sent from my iPhone using Tapatalk
QFT
1994 MX5 Clubman
Jenvey ITBs, ported head, Kelford 203-D cams, stock-ish bottom end, Maxim Works header, MS2
XIDAs, Wilwoods, 6ULs
Jenvey ITBs, ported head, Kelford 203-D cams, stock-ish bottom end, Maxim Works header, MS2
XIDAs, Wilwoods, 6ULs
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 24 guests