HI guys, as some of you may or may not know I'm in the process of fitting an SE turbo kit to an NB8B VVT engine and I'm looking for a cost effective ecu to run it smoothy. I dont like my chances of finding an ecu second hand so I've been looking at the AEM EMS-4 from http://fab9tuning.com/aem-ems4-stand-al ... anagement/ . I know it is nearly as expensive with the current dollar but ive read it is more powerful etc. Has anyone had experience with one and is it easily tuneable? I value a a painless install.
Cheers!
Cost effective ECU solution.
Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean
-
- Fast Driver
- Posts: 164
- Joined: Thu Jan 24, 2013 12:14 am
- Vehicle: NB8B
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Cost effective ECU solution.
I believe the Adaptronic ones here in Aust are about $1500 new, and I think are available as a straight plugin unit.
I'm not sure if they have a basemap or whatever, but with how the dollar is the price likely works out the same.
Plus, i'd bet you'll find a lot more tuners in Aust willing to touch an Adaptronic that an AEM.
I'm not sure if they have a basemap or whatever, but with how the dollar is the price likely works out the same.
Plus, i'd bet you'll find a lot more tuners in Aust willing to touch an Adaptronic that an AEM.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
-
- Fast Driver
- Posts: 400
- Joined: Thu Oct 15, 2009 9:12 am
- Vehicle: NB SE
- Location: Adelaide
Re: Cost effective ECU solution.
Keep an eye out in the FS section and on the facebook page. I picked up my Adaptronic select ECU and MTX-L wideband off here for less than the cost of a brand new select ECU.
Also, base maps are available off the adaptronic website or via email.
Also, base maps are available off the adaptronic website or via email.
89' Roadster - Sold
'04 SE - Sunlight Silver.
'04 SE - Sunlight Silver.
-
- Racing Driver
- Posts: 1212
- Joined: Tue Nov 06, 2012 10:03 pm
- Vehicle: NB Roadster
- Contact:
Re: Cost effective ECU solution.
Can vouch for adaptronic base maps, at least on the simple ones like NB8As. Without any adjustment at all, the base map for mine runs very nearly like stock.
[youtube]http://www.youtube.com/watch?v=tEOzHkvaPqI[/youtube]
[youtube]http://www.youtube.com/watch?v=tEOzHkvaPqI[/youtube]
QR Clubman: 1:03.9 | QR Sprint: 1:01.4 | QR National: 1:29.4 | LS: 1:01.5 | Mt Cotton: 51.6
-
- Fast Driver
- Posts: 164
- Joined: Thu Jan 24, 2013 12:14 am
- Vehicle: NB8B
Re: Cost effective ECU solution.
Trackphotos wrote:Can vouch for adaptronic base maps, at least on the simple ones like NB8As. Without any adjustment at all, the base map for mine runs very nearly like stock.
[youtube]http://www.youtube.com/watch?v=tEOzHkvaPqI[/youtube]
That looks awesome, I like the idea of a trouble free install. I would need a tune good enough to drive the car 2 hours up to Sydney to get tuned.
- Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Re: Cost effective ECU solution.
hks_kansei wrote:I believe the Adaptronic ones here in Aust are about $1500 new, and I think are available as a straight plugin unit.
I'm not sure if they have a basemap or whatever, but with how the dollar is the price likely works out the same.
Plus, i'd bet you'll find a lot more tuners in Aust willing to touch an Adaptronic that an AEM.
That last point is the most valid - no point in getting an ECU that few people know anything about.
eg. Flyin' Miata push their Hydra ECU but you wont find anyone in Australia with it since no-one knows enough about it to tune it (it's not highly regarded in the US either).
TrackSpeed Engineering sell the AEM ECU because Savington is familiar with it; few tuners in Australia will know anything about it.
Golden rule of aftermarket ECUs, especially if you're not going to learn to tune it yourself, "Find a highly regarded tuner near you and use whatever ECU they recommend.".
There 2 ECUs you should be considering, in their latest incarnations, Adaptronic and Haltech. Megasquirt ECUs are highly regarded on MiataTurbo.net and are becoming more commonplace here too so that's another option.
Adaptronic ECUs come with base maps for multiple stock MX5 configurations, including the SE, but you will most certainly need to tweak it.
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
-
- Fast Driver
- Posts: 164
- Joined: Thu Jan 24, 2013 12:14 am
- Vehicle: NB8B
Re: Cost effective ECU solution.
Lokiel wrote:hks_kansei wrote:I believe the Adaptronic ones here in Aust are about $1500 new, and I think are available as a straight plugin unit.
I'm not sure if they have a basemap or whatever, but with how the dollar is the price likely works out the same.
Plus, i'd bet you'll find a lot more tuners in Aust willing to touch an Adaptronic that an AEM.
That last point is the most valid - no point in getting an ECU that few people know anything about.
eg. Flyin' Miata push their Hydra ECU but you wont find anyone in Australia with it since no-one knows enough about it to tune it (it's not highly regarded in the US either).
TrackSpeed Engineering sell the AEM ECU because Savington is familiar with it; few tuners in Australia will know anything about it.
Golden rule of aftermarket ECUs, especially if you're not going to learn to tune it yourself, "Find a highly regarded tuner near you and use whatever ECU they recommend.".
There 2 ECUs you should be considering, in their latest incarnations, Adaptronic and Haltech. Megasquirt ECUs are highly regarded on MiataTurbo.net and are becoming more commonplace here too so that's another option.
Yeah right, good point. Will have to keep my eye out for an Adaptronic unit, they seem the way to go. Cheers!
Adaptronic ECUs come with base maps for multiple stock MX5 configurations, including the SE, but you will most certainly need to tweak it.
-
- Fast Driver
- Posts: 249
- Joined: Mon Oct 04, 2010 1:28 am
- Vehicle: NB8B - Turbo
- Location: Brisbane QLD
Re: Cost effective ECU solution.
Chiptorque on the gold coast can flash your stock ecu to run the turbo kit. Give Lachlan a call, he actually tuned the SP's for mazda so knows what he's on about when it comes to MX5 Ecu's.
I've got an SP replica NB8B and can't fault the tune.
I've got an SP replica NB8B and can't fault the tune.
- MattR
- Racing Driver
- Posts: 1305
- Joined: Wed Feb 25, 2009 11:26 pm
- Vehicle: NA6
- Location: Brisbane
Re: Cost effective ECU solution.
Someone has to say it....
Motech M130, comppletely over the top for what you need, but at around $2500 for the box will be future proof for whatever you want to do in the future, and then you can also get the fancy logging C125 dash with GPS and logging and have flat shifting for the sequential dog box you will get, antilag to have that horrible gun shot backfire overrun so you never lose the boosts, traction control, and hours of frustration getting it all running right......
Motech M130, comppletely over the top for what you need, but at around $2500 for the box will be future proof for whatever you want to do in the future, and then you can also get the fancy logging C125 dash with GPS and logging and have flat shifting for the sequential dog box you will get, antilag to have that horrible gun shot backfire overrun so you never lose the boosts, traction control, and hours of frustration getting it all running right......
-
- Fast Driver
- Posts: 164
- Joined: Thu Jan 24, 2013 12:14 am
- Vehicle: NB8B
Re: Cost effective ECU solution.
MattR wrote:Someone has to say it....
Motech M130, comppletely over the top for what you need, but at around $2500 for the box will be future proof for whatever you want to do in the future, and then you can also get the fancy logging C125 dash with GPS and logging and have flat shifting for the sequential dog box you will get, antilag to have that horrible gun shot backfire overrun so you never lose the boosts, traction control, and hours of frustration getting it all running right......
Haha, Matt, in my dreams.
- bruce
- Speed Racer
- Posts: 7707
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: No registered users and 0 guests