I am looking for some advice on the pre-load settings for a four corner Tein Super Street set up. We installed them into an NC today and the ride is harsh.
Thanks. Greg.
TEIN SUPER STREETS.
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
taminga16
- Speed Racer
- Posts: 3617
- Joined: Thu Aug 06, 2009 12:22 am
- Vehicle: NC
- Location: Central Victoria
TEIN SUPER STREETS.
When you turn your car on, does it return the favour?
-
Trackphotos
- Racing Driver
- Posts: 1212
- Joined: Tue Nov 06, 2012 10:03 pm
- Vehicle: NB Roadster
- Contact:
Re: TEIN SUPER STREETS.
Assuming linear springs, preload shouldn't affect ride comfort until you bottom them out. Try dampers.
QR Clubman: 1:03.9 | QR Sprint: 1:01.4 | QR National: 1:29.4 | LS: 1:01.5 | Mt Cotton: 51.6
-
Charlie Brown
- Speed Racer
- Posts: 2623
- Joined: Mon Apr 28, 2003 11:00 am
- Vehicle: NC
- Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
- Contact:
Re: TEIN SUPER STREETS.
Greg,
I posted this on the Flex. Should be similar for you with the Superstreets.
viewtopic.php?f=79&t=40918
I also fitted FatCat bumpstops which improved the ride.
The big mistake most people make, besides not having the correct preload, is not having the dampers hard enough and you feel harshness from hitting the bumpstops.
I posted this on the Flex. Should be similar for you with the Superstreets.
viewtopic.php?f=79&t=40918
I also fitted FatCat bumpstops which improved the ride.
The big mistake most people make, besides not having the correct preload, is not having the dampers hard enough and you feel harshness from hitting the bumpstops.
Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20
-
93_Clubman
- Speed Racer
- Posts: 11856
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: TEIN SUPER STREETS.
Alluded to in CB's thread, but keep in mind that if the Teins were made for the JDM then they will have a heavier spring & foot vale than Teins from Fulcrum in QLD for the ADM. According to Fulcrum, QEM & QSM identifies the shock as ADM spec, whereas GAM or GSM identifies the shock as JDM spec. The 2nd half of the model number on the lower shock body shows this identifier.
-
taminga16
- Speed Racer
- Posts: 3617
- Joined: Thu Aug 06, 2009 12:22 am
- Vehicle: NC
- Location: Central Victoria
Re: TEIN SUPER STREETS.
Thank you all, I will not be able to get under the car for a few weeks and will let you know how I get on then.
Greg.
Greg.
When you turn your car on, does it return the favour?
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 103 guests
