tdo4l /tf035 turbo
Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean
-
- Learner Driver
- Posts: 20
- Joined: Fri Mar 13, 2015 8:17 pm
- Vehicle: NA6
- Location: toronto
tdo4l /tf035 turbo
hi guys , does anyone run a TF035 turbo on there NA6 ? what are your thoughts ? good or bad , my thoughts are ,it should spool up quick ,be fun low boost daily driver ,, appreciated your input ,,thanks
-
- Speed Racer
- Posts: 2399
- Joined: Tue Apr 12, 2011 3:04 pm
- Vehicle: NB8B
- Location: North West, NSW
Re: tdo4l /tf035 turbo
I'm no turbo expert but the TD04 is the larger turbo right? I have one (albeit slightly modified) off a T5 Volvo. On my NB it produces 163rwkW on 7psi, very smooth delivery with practically no lag.
I can't imagine a smaller turbo though...I assume it will practically be on boost all the time. Check with Nitro Dann - I recall him fitting a car with a really tiny turbo just for laughs.
I can't imagine a smaller turbo though...I assume it will practically be on boost all the time. Check with Nitro Dann - I recall him fitting a car with a really tiny turbo just for laughs.
-
- Learner Driver
- Posts: 20
- Joined: Fri Mar 13, 2015 8:17 pm
- Vehicle: NA6
- Location: toronto
Re: tdo4l /tf035 turbo
thanks for reply
-
- Learner Driver
- Posts: 20
- Joined: Fri Mar 13, 2015 8:17 pm
- Vehicle: NA6
- Location: toronto
Re: tdo4l /tf035 turbo
anybody here use the tf035 ? turbo is off a Subaru forrester / also on 2.8diesel Mitsubishi .. I do believe its the same as the mighty car mods guys used on there white NA .. could be wrong though
-
- Fast Driver
- Posts: 429
- Joined: Wed Jan 22, 2014 11:55 am
- Vehicle: 10AE - Turbo
- Location: Sydney
Re: tdo4l /tf035 turbo
"On my NB it produces 163rwkW on 7psi, very smooth delivery with practically no lag"
Interetsed in how you managed that Apu with 7psi?
Interetsed in how you managed that Apu with 7psi?
10AE
WP 1:04.7 SMSP GP 1:43.0 South 1:00.8 North 1:09.8
WP 1:04.7 SMSP GP 1:43.0 South 1:00.8 North 1:09.8
-
- Speed Racer
- Posts: 2399
- Joined: Tue Apr 12, 2011 3:04 pm
- Vehicle: NB8B
- Location: North West, NSW
Re: tdo4l /tf035 turbo
Nitro Dann tubular manifold, Volvo TD04 turbo with WRX compressor wheel.
-
- Fast Driver
- Posts: 393
- Joined: Tue Apr 06, 2010 10:53 pm
- Vehicle: NB8A
- Location: Newcastle (Woodberry)
Re: tdo4l /tf035 turbo
a lot of reading here about td04 compressor flow maps ken.may be usefull.
http://www.stealth316.com/2-3s-compflowmaps.htm
Mick
http://www.stealth316.com/2-3s-compflowmaps.htm
Mick
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: tdo4l /tf035 turbo
Apu also has water/methanol injection, and that reading was on the Mania dyno which is known for being a little enthusiastic, regardless it has an efficient setup that hauls arse.
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
- Speed Racer
- Posts: 2399
- Joined: Tue Apr 12, 2011 3:04 pm
- Vehicle: NB8B
- Location: North West, NSW
Re: tdo4l /tf035 turbo
True...but water-meth produces an extra 13kw, so it reads 176rwkW on the Mania dyno.
Speaking of which...would be good to organise a dyno day some time!
Speaking of which...would be good to organise a dyno day some time!
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: No registered users and 81 guests