Alternator

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

madjak
Racing Driver
Posts: 1117
Joined: Tue Dec 31, 2013 12:11 pm
Vehicle: NA6

Alternator

Postby madjak » Mon Jun 08, 2015 8:15 pm

What sort of sized alternator would be considered minimum for a race car?

I'm talking NO aircon, heater, stereo etc.
It would need to run COPs, ignition, ECU, Fuel pump, electric windows, lights every now and then and have some left to top up a battery.

Would a 45amp alternator work ok?
NA8: N/A 200whp | Haltech | Skunk2 Intake | S90 TB | RCP | 5 speed c/r dogbox | 4.78 diff | AST Shocks
Barbs L: 64.12 | S: 58.62 | Collie: 49.72

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: Alternator

Postby Magpie » Tue Jun 09, 2015 9:42 am

Can't help with the alternator size but consider fitting an anderson plug type setup where you can plug in an external battery to either power the car or give a boost to help start.

madjak
Racing Driver
Posts: 1117
Joined: Tue Dec 31, 2013 12:11 pm
Vehicle: NA6

Re: Alternator

Postby madjak » Tue Jun 09, 2015 1:18 pm

Magpie wrote:Can't help with the alternator size but consider fitting an anderson plug type setup where you can plug in an external battery to either power the car or give a boost to help start.


yeah I'm going to do that. I sometimes have issues starting my car. I'm going to purchase an RC LiPo battery that will hook up in the engine bay (ie close to the starter) via an anderson. I can then hook this up to get it cranking and then disconnect once it's running.

In terms of an alternator... is there any way to measure the draw in terms of amperage whilst the car is running?
NA8: N/A 200whp | Haltech | Skunk2 Intake | S90 TB | RCP | 5 speed c/r dogbox | 4.78 diff | AST Shocks
Barbs L: 64.12 | S: 58.62 | Collie: 49.72

madjak
Racing Driver
Posts: 1117
Joined: Tue Dec 31, 2013 12:11 pm
Vehicle: NA6

Re: Alternator

Postby madjak » Tue Jun 09, 2015 1:22 pm

madjak wrote:
Magpie wrote:Can't help with the alternator size but consider fitting an anderson plug type setup where you can plug in an external battery to either power the car or give a boost to help start.


yeah I'm going to do that. I sometimes have issues starting my car. I'm going to purchase an RC LiPo battery that will hook up in the engine bay (ie close to the starter) via an anderson. I can then hook this up to get it cranking and then disconnect once it's running.

In terms of an alternator... is there any way to measure the draw in terms of amperage whilst the car is running?


Actually I have a hobbyking wattmeter that runs up to 100A. I can just use that!
NA8: N/A 200whp | Haltech | Skunk2 Intake | S90 TB | RCP | 5 speed c/r dogbox | 4.78 diff | AST Shocks
Barbs L: 64.12 | S: 58.62 | Collie: 49.72


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 100 guests