HELP: White/grey smoke out of tailpipe

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Jakeeyjones
Driver
Posts: 66
Joined: Thu Apr 24, 2014 4:55 pm
Vehicle: NB8A

HELP: White/grey smoke out of tailpipe

Postby Jakeeyjones » Tue May 12, 2015 3:45 pm

Hi guys, been having some issues with my nb... it seems to have a mind of its own. Some days it will blow thick white/grey smoke out of the tailpipe upon start up only after the car has been sitting over night... this is presumably caused by the burning of oil due to leaking valve stem seals as i have been going through almost a whole bottle of it every week. The issue is that it will do this some days and run really sh*t, sometimes feels as though its only running on 2 cylinders and then when i open it up it feels as though a blockage has been removed and it starts firing properly, then other days its starts fine with no smoke and drives like a dream. the weather isnt a factor cause its been the same weather for the past 2 weeks and for the past week its been clouding up my street with so much smoke it looks like a volcano has erupted, yet the past two days its been starting perfectly with no smoke and runs smoothly all throughout the day.

note:
oil is constantly topped up while being careful not to overfill
black smoke also comes out of the tailpipe
black soot also comes out of the tailpipe only sometimes

if someone could please shed some light on this issue it would be greatly appreciated.

User avatar
Dweezle
Racing Driver
Posts: 1923
Joined: Wed Mar 12, 2008 8:51 am
Vehicle: NA6
Location: Sydney

Re: HELP: White/grey smoke out of tailpipe

Postby Dweezle » Tue May 12, 2015 4:26 pm

My original na6 engine did exactly this after i ran subaru upper cylinder cleaner through it.
Seemed like the carbon deposits were helping the valve stem seals out a bit haha.
I ended up rebuilding the engine and it obviously went away.

Sent from my SM-N9005 using Tapatalk
ALL MUSCLE CARS ARE CRAP
Jeremy Clarkson

except of course, the Almighty VIPER!!!! 8)

User avatar
bruce
Speed Racer
Posts: 7707
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: HELP: White/grey smoke out of tailpipe

Postby bruce » Tue May 12, 2015 5:02 pm

What help do u expect? It is buggered, take it to a mechanic and get it rebuilt.

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: HELP: White/grey smoke out of tailpipe

Postby project.r.racing » Tue May 12, 2015 5:08 pm

white/grey smoke on start up in condensation. normal for the cooler months.

blue/grey smoke on start it is worn valve stem seals. normal for old worn out engines need a rebuild.

i replaced a 265,000km old BP engine once that would blow oil smoke for 30 second continuously for 30 seconds every morning. that reminded me of james bond every time i drove up the street.

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: HELP: White/grey smoke out of tailpipe

Postby hks_kansei » Tue May 12, 2015 5:45 pm

per above ^

White/grey = water/coolant
Blue/grey = oil
Brown/black = fuel

it's pretty normal for any car to blow white smoke during colder weather, often it's just a result of condensation in the exhauist etc after sitting all night.

I would be checking the oil, and the coolant to make sure neither are mixing (any oil in the coolant, or vice versa is a sign the head gasket may be stuffed)

I'd also take the spark plugs out and see what they look like. if your valve stem seals are worn i'd suspect the plugs to be a bit oily, and probably due for a change.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Re: HELP: White/grey smoke out of tailpipe

Postby manga_blue » Wed May 13, 2015 8:19 am

It's not necessarily rooted. It might just be a sticking PCV valve. When they stick shut pressure builds up inside the crankcase and it can force oil up through the rings and down through the valve seals and you blow smoke. When they unstick then everything seems good again.

Good aftermarket ones go for around $10 at Repco, etc. They just pull out/push in from the top of the motor. I'd give that a go first.
’95 NA8


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 84 guests