Shifter and turret lube

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Post Reply
User avatar
davekmoore
Speed Racer
Posts: 4681
Joined: Thu Apr 30, 2009 1:53 am
Vehicle: NC
Location: Esprick, UK

Shifter and turret lube

Postby davekmoore » Mon Apr 06, 2015 5:11 pm

Should the shifter and the turret in an SE 6 speed have any kind of lube/grease etc on any of the parts?
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)
Top
pezchops
Fast Driver
Posts: 399
Joined: Sat Mar 15, 2014 5:40 pm
Vehicle: NB8B
Location: brisbane
Contact:
Contact pezchops

Re: Shifter and turret lube

Postby pezchops » Mon Apr 06, 2015 5:58 pm

i just put a smear of synthetic grease over everything(kluber grease)when i replaced bush and boots.
i think whatever lube you put in the shifter area makes it way into your gearbox so i wouldn't be putting too much on.
its not like there is anything moving fast or underload in there...depending on your gearshanges :D
i could be wrong tho i never looked it up.
Top
greenltd
Fast Driver
Posts: 275
Joined: Sun Mar 30, 2014 8:20 pm
Vehicle: NB8B
Location: S/E Melbourne

Re: Shifter and turret lube

Postby greenltd » Mon Apr 06, 2015 6:08 pm

Prety sure the 6 speed is lubed from the main part of the box, but 5 speed definitely needs lube in the turret
Top
pezchops
Fast Driver
Posts: 399
Joined: Sat Mar 15, 2014 5:40 pm
Vehicle: NB8B
Location: brisbane
Contact:
Contact pezchops

Re: Shifter and turret lube

Postby pezchops » Mon Apr 06, 2015 6:27 pm

greenltd wrote:Prety sure the 6 speed is lubed from the main part of the box, but 5 speed definitely needs lube in the turret

oil is not circulated through the turret on a 6 speed.
there is no metal to metal contact so just a bit of grease smeared on when assembling is ok.
Top
User avatar
davekmoore
Speed Racer
Posts: 4681
Joined: Thu Apr 30, 2009 1:53 am
Vehicle: NC
Location: Esprick, UK

Re: Shifter and turret lube

Postby davekmoore » Mon Apr 06, 2015 8:25 pm

That white lithium grease ok?
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)
Top
User avatar
Roadrunner
coyotes after you
Posts: 1111
Joined: Tue Nov 06, 2012 9:02 pm
Vehicle: NB SE
Location: Newcastle

Re: Shifter and turret lube

Postby Roadrunner » Wed Apr 08, 2015 11:04 pm

davekmoore wrote:That white lithium grease ok?


Should be all good, but I used black all purpose lithium grease.
Seemed to be a bit thicker.
MeepMeep
Top
User avatar
Roadrunner
coyotes after you
Posts: 1111
Joined: Tue Nov 06, 2012 9:02 pm
Vehicle: NB SE
Location: Newcastle

Re: Shifter and turret lube

Postby Roadrunner » Thu Apr 09, 2015 3:43 pm

I should clarify that that is just on moving parts in the turret (gear lever pivot etc), not in the actual gearbox ;)
MeepMeep
Top
Post Reply

Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 29 guests