How to move pedals further forward?

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Mr Sexy
Fast Driver
Posts: 264
Joined: Fri May 11, 2012 7:46 pm
Vehicle: ND - 2
Location: Western Australia

How to move pedals further forward?

Postby Mr Sexy » Sun Mar 29, 2015 10:21 pm

I installeld a sparco sprint on stock rails in my se a few months ago how ever im finding I'm a little too short in the leg department. On the stock seat i would nearly have it all the way back and would feel comfortable with my arms on the wheel, in the sprint im way too far forward! im starting to feel like a nanna! :oops: and thats with my feet barley pressing the clutch all the way in. Is there any thing i can do to bring the pedals further forward? as its an se it has bolt holes for the ally pedals, was thinking of making some chocks and new pedals to bring them forward. Has any one else done this? tried having a look around google but couldnt find much.

Also does any one have link to a thread where nitro dan makes a mounting bracket for the sprints? saw it a while go and have now since lost it, wouldnt mind taking a gander before i attempt it my self.

User avatar
davekmoore
Speed Racer
Posts: 4681
Joined: Thu Apr 30, 2009 1:53 am
Vehicle: NC
Location: Esprick, UK

Re: How to move pedals further forward?

Postby davekmoore » Sun Mar 29, 2015 10:49 pm

I also find the clutch disengagement point to be too far away when the brake and accelerator are at the right distance so I'll be watching this thread for any solutions.

Also interested in alternative mounts for a Sparco Sprint. Lower would be good, so my head is below the roll bar.
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: How to move pedals further forward?

Postby hks_kansei » Mon Mar 30, 2015 9:00 am

I found that with my seat (granted, not a sparco, but still fixed back) my body was too upright and close to the wheel, pedals were ok.

I added a few washers (and a longer high tensile bolt) to space the front of the seat up.

That reclined the backrest a bit, moving my torso away from the wheel, and leaving my legs in about the same position. It also lifted the thigh rest upwards which I preferred to the flat OEM position.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

Nevyn72
Speed Racer
Posts: 2189
Joined: Fri Nov 29, 2013 8:51 am
Vehicle: ND - RF
Location: Sydney

Re: How to move pedals further forward?

Postby Nevyn72 » Mon Mar 30, 2015 10:40 am

Platform shoes? :mrgreen:

Seriously though, try re-mounting the seat angled a little backwards to move your torso further from the wheel..... :wink:
"A Convertible has a top you can put down when the weather's nice...... A Roadster has a top you can put up when the weather's bad."

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: How to move pedals further forward?

Postby NitroDann » Mon Mar 30, 2015 11:58 am

davekmoore wrote:I also find the clutch disengagement point to be too far away when the brake and accelerator are at the right distance so I'll be watching this thread for any solutions.

Also interested in alternative mounts for a Sparco Sprint. Lower would be good, so my head is below the roll bar.


Clutch pedal is adjustable.
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

sailaholic
Speed Racer
Posts: 3511
Joined: Thu May 19, 2011 3:38 pm
Vehicle: NA8
Location: Brisbane

Re: How to move pedals further forward?

Postby sailaholic » Mon Mar 30, 2015 12:24 pm

I have the opposite problem, my feet are too close by the time my arms are right and I find a sparco on stock rails too far reclined (we did put a couple of washers just to make sure the sliding mechanism cleared the base of the seat.

If I had a choice I'd probably go more upright with a dished wheel.

Sounds silly but maybe your sitting too far back? I did use the seat further forward on the rails with the sparco then the stock seat.


Sent from my iPhone using Tapatalk

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: How to move pedals further forward?

Postby NitroDann » Mon Mar 30, 2015 12:43 pm

You do have a choice. :P
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

User avatar
davekmoore
Speed Racer
Posts: 4681
Joined: Thu Apr 30, 2009 1:53 am
Vehicle: NC
Location: Esprick, UK

Re: How to move pedals further forward?

Postby davekmoore » Mon Mar 30, 2015 1:09 pm

NitroDann wrote:
davekmoore wrote:I also find the clutch disengagement point to be too far away when the brake and accelerator are at the right distance so I'll be watching this thread for any solutions.

Also interested in alternative mounts for a Sparco Sprint. Lower would be good, so my head is below the roll bar.


Clutch pedal is adjustable.


Love the simplicity of that.
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)

Mr Sexy
Fast Driver
Posts: 264
Joined: Fri May 11, 2012 7:46 pm
Vehicle: ND - 2
Location: Western Australia

Re: How to move pedals further forward?

Postby Mr Sexy » Mon Mar 30, 2015 8:19 pm

The angle of the seat hasn't got much to do with it or not in my case, the kick up at the front lifts my legs up too far making my legs too short. May have to figure it out on my own.

User avatar
beavis
Forum sponsor
Posts: 1405
Joined: Mon Feb 02, 2009 12:31 pm
Vehicle: NB8B - Turbo
Location: Melbourne

Re: How to move pedals further forward?

Postby beavis » Mon Mar 30, 2015 9:44 pm

I hate thinking about seating position in the mx5..... i cant find any seat that fits in the car and that fits me in the car.
I have serious headroom issues.

For me, the best seat in the car is no seat at all... at least then I can fit my head in the thing, and the rear firewall is the perfect distance from the steering wheel, and its nice and low.
It's just uncomfortable and not really a proper 'seat'.
Turbo NB Build Thread | BeavisMotorsport.com | YouTube.com/bbeavis | Cars: NA6, NA8-VVT, NB-Turbo, ND-2L

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: How to move pedals further forward?

Postby NitroDann » Mon Mar 30, 2015 10:35 pm

FIA expanding foam seat.

You're welcome.

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

sailaholic
Speed Racer
Posts: 3511
Joined: Thu May 19, 2011 3:38 pm
Vehicle: NA8
Location: Brisbane

Re: How to move pedals further forward?

Postby sailaholic » Mon Mar 30, 2015 10:58 pm

NitroDann wrote:You do have a choice. :P


Upright yes, dished wheel brings me into potential conflict with the POpo though with out a padded center.


Sent from my iPhone using Tapatalk


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: Google [Bot] and 138 guests