timk makes up for talent with an EFR

gslender · Postby **gslender** » Fri Aug 22, 2014 1:41 pm

sailaholic wrote:Great stuff Tim. We are looking at doing similar on my NA but using the civic "half radiators"

Would be keen to see how installing that Civic rad goes... take heaps of pics and post pls.

G

timk · Postby **timk** » Sun Nov 16, 2014 1:25 am

Changes are coming...

Magpie · Postby **Magpie** » Sun Nov 16, 2014 8:16 am

Your changing the dipstick handle

timk · Postby **timk** » Mon Nov 24, 2014 11:05 am

Piecing together the new setup:

Postby **NitroDann** » Mon Nov 24, 2014 1:23 pm

Thank god.

toppertee · Postby **toppertee** » Wed Nov 26, 2014 7:16 pm

You know....I had those flanges sitting in my shed, you could of had them for free.....

timk · Postby **timk** » Wed Nov 26, 2014 10:43 pm

toppertee wrote:You know....I had those flanges sitting in my shed, you could of had them for free.....

That would be right! I'd be happy to take them off your hands for some liquid currency? :beer:

I could use them for the next instalment of "making up for talent with horsepower".

plohl · Postby **plohl** » Wed Nov 26, 2014 10:59 pm

I need some of that too

Sooooooo..... is it running yet?

toppertee · Postby **toppertee** » Thu Nov 27, 2014 11:01 am

timk wrote:
toppertee wrote:You know....I had those flanges sitting in my shed, you could of had them for free.....

That would be right! I'd be happy to take them off your hands for some liquid currency?

I could use them for the next instalment of "making up for talent with horsepower".

Pretty sure I gave what was left over to Zoom Zoom and Gslender. I'm sure beer works with them as well :mrgreen:

jerrah · Postby **jerrah** » Mon Dec 01, 2014 9:31 pm

Which turbo is that? I'll have no hope of keeping up with you now! :lol:

Postby **NitroDann** » Mon Dec 01, 2014 9:38 pm

Borg Warner 6258 (if its a 6758 Ill be damned he has more balls than most, its the turbo to go for IMO)

Dann

timk · Postby **timk** » Fri Mar 27, 2015 1:45 pm

Manifold is done. I apologise in advance for posting such explicit material:

The holes for the EGT bungs were done on a milling machine so they are all evenly spaced and perfectly flat!

Who do you guys recommend for high temp coatings in or around Brisbane?

Cheers

Ice88 · Postby **Ice88** » Fri Mar 27, 2015 2:32 pm

Competition Coatings are pretty good and are out at Archerfield:
http://www.competitioncoatings.com.au

timk · Postby **timk** » Fri Mar 27, 2015 3:29 pm

Thanks Ice88, I'll check them out.

I have a few side projects going on, first of all I am trying some LS3 coils. The factory ignition wiring is a bit on the light side so I'm hoping to minimise voltage drop due to inrush current by using some beefy caps:

The second project I have been working on is an Adaptronic hardware datalogger. This runs on AVR (Arduino) using a fairly common shield, plus an RS232 line driver board:

I have a fully working prototype, let me know if you have an Adaptronic and are keen to test it!

Cheers