High temps in summer heat.....suggestions please.

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
Roadrunner
coyotes after you
Posts: 1111
Joined: Tue Nov 06, 2012 9:02 pm
Vehicle: NB SE
Location: Newcastle

Re: High temps in summer heat.....suggestions please.

Postby Roadrunner » Mon Jan 19, 2015 3:02 pm

Excuse my lack of knowledge, but blocked by what? Internally or externally?
MeepMeep

maxgus
Fast Driver
Posts: 364
Joined: Tue May 29, 2012 10:35 pm
Vehicle: NB8A - Supercharged
Location: Brisbane North

Re: High temps in summer heat.....suggestions please.

Postby maxgus » Mon Jan 19, 2015 3:41 pm

Not 100% sure mate. Calsification maybe. I have ways run demineralized water. Could have been from mixing 2 coolants that dont mix together. Had a 200k service about 6 months ago so maybe some sh*t got dislodged after the water pump was replaced. Only way to really tell is by cutting it open.
Feather weight

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Re: High temps in summer heat.....suggestions please.

Postby Mr Morlock » Mon Jan 19, 2015 8:09 pm

maybe it was a poor quality radiator. 3 years is pathetic. If its blocked wouldn't the radiator specialist check it to see if it would respond to a cleaning process. I find it hard to believe that any additives used in the water which are commonly sold are likely to be the cause.

User avatar
bruce
Speed Racer
Posts: 7707
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: High temps in summer heat.....suggestions please.

Postby bruce » Mon Jan 19, 2015 8:21 pm

A radiator guy could unblock it.

maxgus
Fast Driver
Posts: 364
Joined: Tue May 29, 2012 10:35 pm
Vehicle: NB8A - Supercharged
Location: Brisbane North

Re: High temps in summer heat.....suggestions please.

Postby maxgus » Mon Jan 19, 2015 8:34 pm

Yeah rang red devil rads. Apparently have to cut the end tank off, clean out and weld back on. Not financially viable. $200 for a new ASI unit.
Feather weight


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 15 guests