Side swiped mx5 - what to do?
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Learner Driver
- Posts: 14
- Joined: Tue Oct 15, 2013 3:57 pm
- Vehicle: ND - 2
Side swiped mx5 - what to do?
He's a student so he only had fire and theft, excess would have been too much.
So how do we repair it on a limited budget?
Change the door so he can drive it?
Buy a rear panel and weld it in or panel beat it?
Any help or suggestions?
You do not have the required permissions to view the files attached to this post.
- davekmoore
- Speed Racer
- Posts: 4681
- Joined: Thu Apr 30, 2009 1:53 am
- Vehicle: NC
- Location: Esprick, UK
Re: Side swiped mx5 - what to do?
Any CCTV footage available?
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)
-
- Learner Driver
- Posts: 14
- Joined: Tue Oct 15, 2013 3:57 pm
- Vehicle: ND - 2
Re: Side swiped mx5 - what to do?
No it was a quiet side street
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Side swiped mx5 - what to do?
A secondhand door will be the most cost effective repair for that.
And the rear quarter, you're correct, buying a replacement and welding it in will be the cheapest (assuming you can weld at home, if a workshop needs to do it the cost will add up quickly)
how is the rear wheel/diff etc? if the suspension arms have been bent it may be easier to sell and buy another mx5
And the rear quarter, you're correct, buying a replacement and welding it in will be the cheapest (assuming you can weld at home, if a workshop needs to do it the cost will add up quickly)
how is the rear wheel/diff etc? if the suspension arms have been bent it may be easier to sell and buy another mx5
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
-
- Racing Driver
- Posts: 1720
- Joined: Wed Aug 03, 2011 5:57 pm
- Vehicle: NB SE
- Location: Sydney
Re: Side swiped mx5 - what to do?
Ouch
A new door hopefully fits on, looks like you need a mirror too.
Be sure to check the guard too, almost looks like it'll cut into the tyre.
You could "flare" it back out with a guard roller.
Fixing that guard will be very difficult, cutting and welding and bogging and painting.
If you don't end up doing that at least cover the bare metal in primer/paint.
A new door hopefully fits on, looks like you need a mirror too.
Be sure to check the guard too, almost looks like it'll cut into the tyre.
You could "flare" it back out with a guard roller.
Fixing that guard will be very difficult, cutting and welding and bogging and painting.
If you don't end up doing that at least cover the bare metal in primer/paint.
-
- Speed Racer
- Posts: 3471
- Joined: Sun Jan 19, 2014 9:52 am
- Vehicle: NA6
- Location: Lugarno, Sydney
Re: Side swiped mx5 - what to do?
Cut and weld on a replacement rear quarter or sell the bits and move on.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
NA6 turbo - 140kw atw - not the most powerful but so much fun
- MattR
- Racing Driver
- Posts: 1305
- Joined: Wed Feb 25, 2009 11:26 pm
- Vehicle: NA6
- Location: Brisbane
Re: Side swiped mx5 - what to do?
Look for a light blue car with damage and go postal on them.......
I would report to the police anyways, as you never know your luck, and keep an eye out for a car with damage, even a bull bar will have some damage done to it, and if it is a quiet side street that isn't used for a rat run, odds on the car is local or frequents the area.
I would report to the police anyways, as you never know your luck, and keep an eye out for a car with damage, even a bull bar will have some damage done to it, and if it is a quiet side street that isn't used for a rat run, odds on the car is local or frequents the area.
-
- Learner Driver
- Posts: 14
- Joined: Tue Oct 15, 2013 3:57 pm
- Vehicle: ND - 2
Re: Side swiped mx5 - what to do?
He only had the car for 2 months, at only 20yr he could only afford fire and theft.
I'll try and make it drivable with a new door to start with. Anyone have one? :-)
Then long term look at a new rear qtr panel, undercoat for now. It will only be worth while if we do the work ourselves.
Harry
I'll try and make it drivable with a new door to start with. Anyone have one? :-)
Then long term look at a new rear qtr panel, undercoat for now. It will only be worth while if we do the work ourselves.
Harry
- mattyredlocks
- Fast Driver
- Posts: 376
- Joined: Sun Jan 05, 2014 3:57 pm
- Vehicle: NB8B
- Location: Brisbane, QLD
Re: Side swiped mx5 - what to do?
Ouch! So unfortunate.
Same thing happened to my first car - also only a couple months after I got it. though mine was brand new and got repaired. Ruined that "no claim bonus" though.
Depending what the condition of the rest of it is like, it may be cheaper to just get a new one, and flip that one for as much as you can get.
Same thing happened to my first car - also only a couple months after I got it. though mine was brand new and got repaired. Ruined that "no claim bonus" though.
Depending what the condition of the rest of it is like, it may be cheaper to just get a new one, and flip that one for as much as you can get.
- bruce
- Speed Racer
- Posts: 7706
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: Side swiped mx5 - what to do?
Before you spend a cent, make sure it drives properly (make sure it's still square, doesn't crab, etc). A lot of cars get written off due to that sort of damage. Maybe get a wheel alignment (that will tell you lots)?
If all OK, just spend the minimum. MXs aren't worth that much and to repair all that is not worth it.
If all OK, just spend the minimum. MXs aren't worth that much and to repair all that is not worth it.
-
- Learner Driver
- Posts: 14
- Joined: Tue Oct 15, 2013 3:57 pm
- Vehicle: ND - 2
Re: Side swiped mx5 - what to do?
bruce wrote:Before you spend a cent, make sure it drives properly (make sure it's still square, doesn't crab, etc). A lot of cars get written off due to that sort of damage. Maybe get a wheel alignment (that will tell you lots)?
If all OK, just spend the minimum. MXs aren't worth that much and to repair all that is not worth it.
good point
- ndragun
- Fast Driver
- Posts: 376
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: ND - 2 GT
- Location: Brisbane, QLD
- Contact:
Re: Side swiped mx5 - what to do?
Yea that's some pretty hefty damage. You can't just replace a rear quarter panel unfortunately.
You might consider breaking it down and selling parts, and buying a replacement car. It would probably work out cheaper than fixing the damage!
You might consider breaking it down and selling parts, and buying a replacement car. It would probably work out cheaper than fixing the damage!
1994 MX5 Clubman
Jenvey ITBs, ported head, Kelford 203-D cams, stock-ish bottom end, Maxim Works header, MS2
XIDAs, Wilwoods, 6ULs
Jenvey ITBs, ported head, Kelford 203-D cams, stock-ish bottom end, Maxim Works header, MS2
XIDAs, Wilwoods, 6ULs
-
- Speed Racer
- Posts: 2399
- Joined: Tue Apr 12, 2011 3:04 pm
- Vehicle: NB8B
- Location: North West, NSW
Re: Side swiped mx5 - what to do?
Buy an Exocet frame!
- SuperMazdaKart
- Racing Driver
- Posts: 1980
- Joined: Tue Oct 26, 2004 9:10 pm
- Vehicle: ND - 2 GT
- Location: Adelaide
Re: Side swiped mx5 - what to do?
There's a RHR genuine Mazda panel at Wingfield. http://www.gumtree.com.au/s-ad/wingfield/auto-body-parts/brand-new-mx5-rhr-quater/1064398943
Might be worth parting out & selling the parts, it could take a while to re-coup back enough money to buy something else. Currently there's a cheap MX-5 on Gumtree at the moment that had a replacement engine & clutch.
Might be worth parting out & selling the parts, it could take a while to re-coup back enough money to buy something else. Currently there's a cheap MX-5 on Gumtree at the moment that had a replacement engine & clutch.
-
- Learner Driver
- Posts: 14
- Joined: Tue Oct 15, 2013 3:57 pm
- Vehicle: ND - 2
Re: Side swiped mx5 - what to do?
SuperMazdaKart wrote:There's a RHR genuine Mazda panel at Wingfield. http://www.gumtree.com.au/s-ad/wingfield/auto-body-parts/brand-new-mx5-rhr-quater/1064398943
Might be worth parting out & selling the parts, it could take a while to re-coup back enough money to buy something else. Currently there's a cheap MX-5 on Gumtree at the moment that had a replacement engine & clutch.
yep saw that one, picked it up for $220. Now for a cheap door.
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 279 guests