Major rattle in stock na6 diff

Engines, Transmissions & Final Drive questions and answers
Jakeeyjones
Driver
Posts: 66
Joined: Thu Apr 24, 2014 4:55 pm
Vehicle: NB8A

Major rattle in stock na6 diff

Postby Jakeeyjones » Wed Dec 17, 2014 12:36 am

Just wondering if anyone has a solution to this problem? i heard many earlier models suffer from this rattle during deceleration

Thanks
Jake

speed
Speed Racer
Posts: 3471
Joined: Sun Jan 19, 2014 9:52 am
Vehicle: NA6
Location: Lugarno, Sydney

Re: Major rattle in stock na6 diff

Postby speed » Wed Dec 17, 2014 8:29 am

Never experienced this. Maybe your diff needs s rebuild?


Sent from my iPhone using Tapatalk
NA6 turbo - 140kw atw - not the most powerful but so much fun :D

Jakeeyjones
Driver
Posts: 66
Joined: Thu Apr 24, 2014 4:55 pm
Vehicle: NB8A

Re: Major rattle in stock na6 diff

Postby Jakeeyjones » Wed Dec 17, 2014 1:22 pm

It makes very loud grinding and rattling noises while the car is decelerating, very annoying :x
would you have an idea of how much a rebuild would cost?

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: Major rattle in stock na6 diff

Postby hks_kansei » Wed Dec 17, 2014 1:37 pm

Those noises are a pretty good indication it's about stuffed.

Rebuild costs would depend on what is damaged inside and needs replacing.


The most cost effective way to fix it would be to replace the entire diff with a secondhand one, the diffs from the 1.6 aren't usually that sought after, so can be picked up fairly cheaply. (I've seen anywhere from a case of beer to about $150 listed on 1.6 open diffs)
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

Jakeeyjones
Driver
Posts: 66
Joined: Thu Apr 24, 2014 4:55 pm
Vehicle: NB8A

Re: Major rattle in stock na6 diff

Postby Jakeeyjones » Wed Dec 17, 2014 1:48 pm

Thanks hks for the info, do many people sell them on this forum or will i have to go elsewhere? might post a wtb and see if i get any replies

speed
Speed Racer
Posts: 3471
Joined: Sun Jan 19, 2014 9:52 am
Vehicle: NA6
Location: Lugarno, Sydney

Re: Major rattle in stock na6 diff

Postby speed » Wed Dec 17, 2014 5:39 pm

Weren't you chasing for big hp and going for a torsen? Maybe I have you confused with someone else. Will check my PMs :)
If you are chasing big hp, go straight for the torsen!


Sent from my iPhone using Tapatalk
NA6 turbo - 140kw atw - not the most powerful but so much fun :D

trader
Racing Driver
Posts: 797
Joined: Fri Oct 10, 2003 10:41 am
Vehicle: NB SE
Location: canberra

Re: Major rattle in stock na6 diff

Postby trader » Wed Dec 17, 2014 9:12 pm

Sounds like its a lsd diff ('92?). Best bet is to start looking now for a torsen - they run for quite a while like that - just get s annoying.
NB SE, NA 1.8.

User avatar
aka_juffa
Racing Driver
Posts: 1005
Joined: Wed Dec 14, 2011 2:40 pm
Vehicle: NA8
Location: SE Melbourne.

Re: Major rattle in stock na6 diff

Postby aka_juffa » Thu Dec 18, 2014 11:35 am

Not meaning to question your ability to diagnose the source of the rattle, but are you 100% sure that it is the diff?

NA6 have issues with a rattle in the exhaust heat shield Fixed by locking down the heat shield with a hose clamp, or removing the heat shield or bending the heat shield to stop the offending part from rubbing on the exhaust. Note that this noise is only apparent during a certain engine rev range.

Gearbox noises due to gear lash issues. Quite often only appears after the gearbox has been removed to fit a new clutch. Found that replacing the diff with one from a later model fixed the issue as the later model as thick rubber isolation pads at the tail shaft and diff connection point......of course this will also fix your issue as stated........

j
Motor Neurone Disease chose me, I choose Voluntary Assisted Dying.


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 34 guests