Final (?) Haltech tuning issues relating to OEM sensors??
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: Final (?) Haltech tuning issues relating to OEM sensors?
Man, I would say dump the Haltech and switch to something else, tell Haltech and point them to this thread!
- davekmoore
- Speed Racer
- Posts: 4681
- Joined: Thu Apr 30, 2009 1:53 am
- Vehicle: NC
- Location: Esprick, UK
Re: Final (?) Haltech tuning issues relating to OEM sensors?
sailaholic wrote:*not compatible* = * I can't figure out how to make it work*
I agree. Hence my other post asking for recommendations of Haltech tuners who also know about MX5s rather than possibly being very good with V8s.
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Final (?) Haltech tuning issues relating to OEM sensors?
I have a customer who's haltech equipped turbo nb8b performs flawlessly.
Dann
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
- davekmoore
- Speed Racer
- Posts: 4681
- Joined: Thu Apr 30, 2009 1:53 am
- Vehicle: NC
- Location: Esprick, UK
Re: Final (?) Haltech tuning issues relating to OEM sensors?
Yup, I'm now sure the Haltech PS1000 itself is fine. Looking for a consensus on the best tuner for it in this post please: viewtopic.php?f=55&t=66373
Of course, Newcastle is only 11 hours drive away Dann. Maybe I should come for a loooong weekend?
Of course, Newcastle is only 11 hours drive away Dann. Maybe I should come for a loooong weekend?
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)
- greenMachine
- Forum Guru
- Posts: 4053
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB SE
- Location: Sports car paradise - Canberra
- Contact:
Re: Final (?) Haltech tuning issues relating to OEM sensors?
That is not such a silly idea. It would only take a day for the tune.
I never met a horsepower I didn't like (thanks bwob)
Build thread
NB SE - gone to the dark side (and loving it )
Build thread
NB SE - gone to the dark side (and loving it )
- gslender
- Speed Racer
- Posts: 2330
- Joined: Sat Feb 19, 2011 10:49 pm
- Vehicle: NA6
- Location: Brisbane, QLD
Re: Final (?) Haltech tuning issues relating to OEM sensors?
Can't believe some people avoid Megasquirt for the lack of finding a tuner. Seems that theory doesn't hold up well even for the popular brands.
MX5 91 NA6 LE completely stock and loving it!
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: Final (?) Haltech tuning issues relating to OEM sensors?
if you cannot get "service" its a serious impediment. Driving interstate is just crazy
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Final (?) Haltech tuning issues relating to OEM sensors?
A lot of my customers don'tseem to think so.
Take it to the same place every week for months to get it right or drive down fly home and pick it up in a week once.
Dann
Take it to the same place every week for months to get it right or drive down fly home and pick it up in a week once.
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
- Caffeine
- Racing Driver
- Posts: 1806
- Joined: Wed Apr 23, 2003 11:00 am
- Vehicle: NB8B
- Location: Sydney
Re: Final (?) Haltech tuning issues relating to OEM sensors?
Does the PS1000 have some sort of software low pass filter or smoothing that can be applied to the throttle position sensor value?
Supreme Blue NB8B, 1:16.98 at Wakefield when stock, but it's not stock any more...
- davekmoore
- Speed Racer
- Posts: 4681
- Joined: Thu Apr 30, 2009 1:53 am
- Vehicle: NC
- Location: Esprick, UK
Re: Final (?) Haltech tuning issues relating to OEM sensors?
If it does, Haltech and the tuner between then should have used it to sort the issues by now.
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)
-
- Forum Guru
- Posts: 1525
- Joined: Fri Jun 29, 2012 9:23 pm
- Vehicle: NB8B - Turbo
- Location: Brisbane, Qld. Previously Perth WA
- Contact:
Re: Final (?) Haltech tuning issues relating to OEM sensors?
Dave, what was the resolution of your apparently sensitive TPS? In spite of my earlier comments in this thread, my throttle 'first crack' was very sensitive. When I talked to the tuner about it, he said the signal from the tps was behaving strangely, in that it was jumping straight to about 50% and then settling back towards 30%. He commented that he had already adjusted the resolution as far as he thought was sensible.
We discussed trial swapping some second hand sensors to see if there was an obvious difference, but I have not had an update as yet.
We discussed trial swapping some second hand sensors to see if there was an obvious difference, but I have not had an update as yet.
-
- Speed Racer
- Posts: 3511
- Joined: Thu May 19, 2011 3:38 pm
- Vehicle: NA8
- Location: Brisbane
Re: Final (?) Haltech tuning issues relating to OEM sensors?
I think Dave found a heap of other issues causing the problems.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Forum Guru
- Posts: 1525
- Joined: Fri Jun 29, 2012 9:23 pm
- Vehicle: NB8B - Turbo
- Location: Brisbane, Qld. Previously Perth WA
- Contact:
Re: Final (?) Haltech tuning issues relating to OEM sensors?
I swapped my 2003 70,000km TPS for a second hand one today, and the car is transformed.
- davekmoore
- Speed Racer
- Posts: 4681
- Joined: Thu Apr 30, 2009 1:53 am
- Vehicle: NC
- Location: Esprick, UK
Re: Final (?) Haltech tuning issues relating to OEM sensors?
sailaholic wrote:I think Dave found a heap of other issues causing the problems.
True, and these are now sorted. However, on a recent trip to Deckspeed for some other work, Daniel Deckers discovered and sorted two faults with the tune which the original tuner had spent five months failing to admit were wrong even despite my doing heaps of research and gently suggesting to him that he was wrong not to adjust them. He kept saying he'd got it as right as it was ever going to be and I foolishly kept believing him.
This, and the oil leaks and other issues, are the reasons for the new signature below.
By the way, bearing in mind that I asked them to several times, I also believe Haltech should have stepped in way before now.
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)
- noddi85
- Fast Driver
- Posts: 172
- Joined: Sat Jul 24, 2010 10:03 pm
- Vehicle: NA6
- Location: Traralgon Victoria Australia
- Contact:
Re: Final (?) Haltech tuning issues relating to OEM sensors?
I run a Haltech. Have had a good result from Anthony at Ace performance and Dyno. He tunes and works on a heap of different cars including mx5s. His price for dialling in my cams and a great base tune then power tune was reasonable also a few little adjustments have been made since included in the original price. Pretty sure I have told you this before though. If your tuner has to start blaming things rather then come up with a solution he's not on your side. He might say that he will wave $1000 but how much have you spent???? Loose the joker money sucker and go to a different tuner
Sometimes I wonder why i have different taste to others??? Then I realise its because Im not a sheep
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 107 guests